BLADESMITH A013-NCD Chinese Chef's Cleaver Review (2026): German 1.4116 Steel
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The BLADESMITH A013-NCD is a Chinese chef's knife, the thin vegetable cleaver used for slicing, dicing and mincing rather than chopping bone. It is made of German 1.4116 stainless with a lasered Damascus pattern (a surface design, not layered Damascus steel) and a pearwood handle, and BLADESMITH backs it with a lifetime warranty. The wide blade is its main appeal: it scoops chopped food off the board and slices vegetables and boneless meat fast. BLADESMITH says plainly that it is not for bones or frozen food. Choose the BLADESMITH if you want a slicing cleaver for vegetables, fish and boneless meat; choose the DRGSKL SUVELAM forged meat cleaver if you want a heavier high-carbon blade with a belt sheath for butchery and outdoor cooking. Everything here comes from the BLADESMITH listing and its specs; the knife was not used for this review.
What stands out
- Chinese chef's cleaver (vegetable cleaver)
- German 1.4116 stainless
- Laser-etched Damascus pattern
- Pearwood handle
- Lifetime warranty; not for bones or frozen food
Who it fits
Good fit for
Buy it if you cook stir-fries and vegetable-heavy meals and want a wide slicing cleaver that doubles as a bench scraper for chopped food.
Who should skip it
Skip it if you need to chop through bones or frozen blocks, or want genuine layered Damascus steel.
Verdict: A wide, light-duty slicing cleaver for vegetables and boneless meat.
BLADESMITH A013-NCD specs explained
A013-NCD blade shape
A tall, thin rectangular blade for slicing and mincing, not hacking.
German 1.4116 stainless
A tough, rust-resistant grade that is easy to resharpen.
Lasered Damascus pattern
A decorative etched finish on a single steel; it does not change performance.
Pearwood handle
A light, streamlined wooden grip.
7.9-inch size, 11.2 oz
The spec field gives 7.9 inches while the title says 7 inches.
BLADESMITH cleaver build notes
BLADESMITH describes a solid blade that resists bending and cracking, sharpened by experienced grinders, on an ergonomic pearwood handle. The size field says 7.9 inches, the title 7 inches; the larger figure may be the full blade length including the heel. No hardness, edge angle or tang type is given. The listing weight is 11.2 ounces, moderate for a slicing cleaver.
Cooking with a Chinese slicing cleaver
Use straight-down and forward slicing cuts for cabbage, scallions, peppers and thinly sliced pork or beef for stir-fry. Turn the blade flat to crush garlic or ginger, and use its width to carry everything to the wok. Bone, frozen meat and hard squash rinds are off limits: a thin cleaver edge rolls or chips on them.
Before you buy the BLADESMITH A013-NCD
Hand wash and dry the knife and keep the pearwood handle out of standing water. Store it in a wide block slot, on a magnetic strip or with a cleaver guard. For bone work, add a heavy chopper; this one is a slicer.
Check before you buy
- Stir-fry prep fills your week
- Your meat is boneless
- A wooden handle appeals to you
- You know an etched pattern is cosmetic
The product at a glance
BLADESMITH 7.9-Inch German Steel Cleaver
Best for: Vegetable slicing
- Blade Length
- 7"
- Knife Type
- Cleaver Knife
- Blade Material
- German 1.4116 Stainless Steel
- Handle Material
- Pearwood
- Style
- Chinese
- Recommended Use
- Vegetables, Meat
View on Amazon: BLADESMITH 7.9-Inch German Steel Cleaver Affiliate link
BLADESMITH A013-NCD: Chinese chef's slicing cleaver, German 1.4116 stainless, laser-etched Damascus pattern, pearwood handle, 11.2 oz; 7.9" size field vs 7" title; no bones or frozen food.
Pros
- Wide blade scoops food
- Easy-care 1.4116 steel
- Lifetime warranty
Cons
- Not for bones or frozen food
- Pattern is etched, not layered
Good fit if
- You slice vegetables and boneless meat
- You want a light cleaver
Skip if
- You chop bones
- You want true Damascus
Verdict: A light Chinese slicing cleaver with a lifetime warranty.
Specifications side by side
| Spec | BLADESMITH 7.9-Inch German Steel Cleaver |
|---|---|
| Blade Length | 7" |
| Knife Type | Cleaver Knife |
| Blade Material | German 1.4116 Stainless Steel |
| Handle Material | Pearwood |
| Style | Chinese |
| Recommended Use | Vegetables, Meat |
| Weight | 11.2 ounces |
| Size | 7.9" |
| Color | A013-NCD |
Frequently asked questions
Can the BLADESMITH cleaver cut bones?
No, BLADESMITH says it is not for bones or frozen food.
Is the BLADESMITH A013-NCD real Damascus steel?
No, it is 1.4116 steel with a lasered Damascus pattern.
What steel is the BLADESMITH cleaver made of?
The A013-NCD blade is German 1.4116 stainless.
What handle does the BLADESMITH A013-NCD have?
An ergonomic pearwood handle.
Does BLADESMITH offer a warranty on this cleaver?
Yes, BLADESMITH supports the A013-NCD with a lifetime warranty.
Featured in
See also
- drgskl 6 piece ats 34 knife set review
- drgskl hand forged meat cleaver review
- magiware classic 3 piece ceramic knife set review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- cusimax meat slicer review
- mvuyo digital meat thermometer review
