BTEPSGA 7-Inch Nakiri Vegetable Knife Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The BTEPSGA 7-inch nakiri is a Japanese-style vegetable knife: a flat, squared-off blade made for straight push cuts through onions, cabbage and root vegetables, where a curved chef knife would rock. BTEPSGA uses high-carbon stainless steel, hand-hones the edge to 14-16 degrees per side and fits a triple-riveted Pakkawood handle. It suits cooks who prep a lot of vegetables and want a low-cost nakiri to try the style. Choose the BTEPSGA if your board is mostly vegetables; choose the XINZUO 7.6-inch santoku if you also cut meat and fish and want a harder 62 HRC core. The model field reads 'BT7-Chinese Cleaver' and the title says veggie cleaver, but the bullets describe a nakiri, which is how we treat it. BTEPSGA gives no steel grade or hardness. This is a review of BTEPSGA's listing and published specs, not a hands-on test.
What stands out
- 7-inch flat nakiri blade
- High-carbon stainless BTEPSGA blade
- Hand-honed BTEPSGA edge, 14-16 degreesBTEPSGA Pakkawood handle, three rivets
- Gift box
Who it fits
Good fit for
Buy it if you chop vegetables daily and want a flat blade for clean push cuts.
Who should skip it
Skip it if you need one knife for meat, bones and vegetables, or want a named steel grade.
Verdict: A budget nakiri for vegetable-heavy cooking.
BTEPSGA nakiri specs explained
Flat BTEPSGA nakiri edge
Meets the board along its whole length, so slices separate fully.
BTEPSGA 14-16 degree edge
A typical Japanese-style angle, finer than most Western knives.
High-carbon stainless in the BTEPSGA
No grade or HRC is given, so edge life is hard to judge.
Triple-riveted BTEPSGA Pakkawood
Resin-soaked wood that copes with moisture better than plain wood.
BTEPSGA 1.97-inch width field
Likely the blade height; gives room to scoop chopped food.
BTEPSGA nakiri build
The listing describes a forged high-carbon stainless blade with a hand-honed 14-16 degree edge, a non-slip Pakkawood handle held by three rivets, and a gift box. Spec fields give 12.1 inches overall, 0.08 inches thick and 8 ounces; the thickness may be rounded.
Prepping vegetables with the BTEPSGA
Push the blade forward and down instead of rocking: the flat edge cuts through a carrot or a stack of cabbage leaves in one stroke. Use the tall blade to carry food to the pan. Keep it off bones and frozen food, and wash and dry it by hand.
Before you buy the BTEPSGA
A nakiri has no point, so it is not for piercing, boning or fine tip work. The steel grade is not named, so expect to sharpen it more often than a premium nakiri.
Check before you buy
- Your BTEPSGA would mostly cut vegetables
- You can cut without a rocking motion
- A pointless BTEPSGA blade is fine for you
- You hand wash the BTEPSGA nakiri
The product at a glance
BTEPSGA 7-Inch Nakiri Knife
Best for: Vegetable chopping
- Blade Length
- 7 in
- Knife Type
- Nakiri
- Blade Material
- High carbon stainless steel
- Construction
- Forged
- Edge Angle
- 14–16° per side
- Handle Material
- Pakkawood
View on Amazon: BTEPSGA 7-Inch Nakiri Knife Affiliate link
BTEPSGA 7 in nakiri vegetable knife: flat high-carbon stainless blade, hand-honed 14-16 degree edge per side, triple-riveted Pakkawood handle, gift box. No steel grade or HRC listed.
Pros
- Flat edge for push cuts
- Riveted BTEPSGA Pakkawood grip
- Gift box
Cons
- Steel grade not listed
- No tip for detail work
Good fit if
- You prep lots of vegetables
- You want to try a nakiri
Skip if
- You need an all-purpose chef
- You cut through bones
Verdict: A low-cost nakiri for vegetable prep.
Specifications side by side
| Spec | BTEPSGA 7-Inch Nakiri Knife |
|---|---|
| Blade Length | 7 in |
| Knife Type | Nakiri |
| Blade Material | High carbon stainless steel |
| Construction | Forged |
| Edge Angle | 14–16° per side |
| Handle Material | Pakkawood |
| Style | Japanese |
| Dimensions | 12.1 × 1.97 × 0.08 inches |
| Weight | 8 ounces |
| Size | 7" |
| Color | Light Silver |
| Model | BT7-Chinese Cleaver |
Frequently asked questions
Is the BTEPSGA a nakiri or a cleaver?
Its bullets describe a 7-inch Japanese nakiri; the model field calls it a cleaver.
What steel is the BTEPSGA nakiri?
High-carbon stainless steel; no grade or hardness is listed.
What edge angle does BTEPSGA use?
14-16 degrees per side, hand-honed.
What is the BTEPSGA handle?
Triple-riveted Pakkawood.
Can the BTEPSGA nakiri cut meat?
Boneless meat, yes; BTEPSGA aims it mainly at vegetables.
Featured in
See also
- masterchef 3 piece chef knife set review
- wickwillow velina 8 inch chef knife review
- dispatch 5 inch bait utility fish knife review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- bovugac iflytek 7 inch review
- creality sonic pad 7 inch review
