HexClad 5-Inch Damascus Utility Knife Review (5UTLK)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The HexClad 5UTLK is a 5-inch utility knife in 67-layer Japanese Damascus stainless steel with a full tang and a green Pakkawood handle. HexClad sharpens it with the three-step Honbazuke method to a 12-degree edge, gives a 9.5-inch overall length with a 4.4-inch handle, and says hand wash only with frequent honing. It sits between a paring knife and a chef knife: big enough for sandwiches, shallots and citrus, small enough for in-hand trimming. HexClad does not name the core steel or the hardness. Choose the 5UTLK if you want one well-finished small knife; choose the ASETY 3-piece Damascus set if you want a chef knife and santoku with a 5.5-inch utility in one box. This review is based on HexClad's listing and published specs, not hands-on testing.
What stands out
- 5-inch utility knife, model 5UTLK
- HexClad 67-layer Japanese Damascus blade
- 12-degree Honbazuke edge
- Full tang, 4.4-inch Pakkawood handle
- 9.5 inches overall, green handle
Who it fits
Good fit for
Buy it if you want a small, sharp in-between knife with a finished look that matches HexClad's other knives.
Who should skip it
Skip it if you want a dishwasher-safe knife, a named core steel, or a cheaper utility knife.
Verdict: A small, fine-edged Damascus utility knife with a Pakkawood handle.
HexClad 5UTLK specs explained
67-layer Damascus on the 5UTLK
Layered stainless steel; HexClad names no core grade or HRC.
Honbazuke 12-degree edge
A three-step sharpening and heat process aimed at a thin, keen edge.
5-inch blade, 4.4-inch handle
Sized for sandwiches, cheese, small fruit and trimming.
Full tang
The steel runs the length of the Pakkawood handle for balance.
9.92 oz weight field
High for a 5-inch knife; it likely includes the box.
HexClad utility knife build
The 5UTLK pairs a 67-layer Damascus blade with a green Pakkawood handle on a full tang. HexClad describes heat treatment for both hardness and flexibility, but gives no steel grade, Rockwell number, blade height or spine thickness. The warranty covers manufacturer defects only and is void for dishwasher use, rust, foodservice use or cutting on hard surfaces.
Day-to-day with the HexClad 5-inch
Use it to slice tomatoes and bagels, segment oranges, trim chicken fat and cut cheese. The 12-degree edge is fine, so cut on wood or plastic boards and hone it often, as HexClad advises. Wash the 5UTLK by hand and dry it before putting it away.
Before you buy the HexClad 5UTLK
Read the warranty terms: dishwasher use, rust and commercial kitchens void it. If you already own a 6-inch utility or a petty knife, this adds little. Check the handle colour, since HexClad sells the knife in more than one finish.
Check before you buy
- A 5-inch in-between knife is missing from your kit
- Hand washing every time is fine
- You hone often, as HexClad advises
- A green Pakkawood handle suits your kitchen
The product at a glance
HexClad 5-Inch Damascus Steel Utility Knife
Best for: Sandwiches, fruit and trimming
- Blade Length
- 5 in
- Knife Type
- Utility
- Blade Material
- Damascus stainless steel
- Construction
- 67 layers Damascus
- Edge Angle
- 12°
- Handle Material
- Pakkawood
View on Amazon: HexClad 5-Inch Damascus Steel Utility Knife Affiliate link
HexClad 5UTLK 5-inch utility knife: 67-layer Japanese Damascus stainless, Honbazuke 12-degree edge, full tang, 4.4-inch green Pakkawood handle, 9.5 in overall. No core steel or HRC listed; hand wash only.
Pros
- Fine 12-degree edge
- Full tang under the HexClad Pakkawood
- Handy 5-inch size
Cons
- Core steel not named
- Warranty void for dishwasher use
Good fit if
- A premium 5-inch knife is what you need
- The sink, not the dishwasher, is where you clean knives
Skip if
- A listed core steel grade matters to you
- You want a cheap utility knife
Verdict: A neat premium utility knife for small daily jobs.
Specifications side by side
| Spec | HexClad 5-Inch Damascus Steel Utility Knife |
|---|---|
| Blade Length | 5 in |
| Knife Type | Utility |
| Blade Material | Damascus stainless steel |
| Construction | 67 layers Damascus |
| Edge Angle | 12° |
| Handle Material | Pakkawood |
| Style | Japanese |
| Weight | 9.92 ounces |
| Size | 5 Inch Utility Knife |
| Color | Green |
| Model | 5UTLK |
Frequently asked questions
What steel is the HexClad 5-inch utility knife?
67-layer Japanese Damascus stainless steel; no core grade is listed.
What edge angle does the HexClad 5UTLK have?
12 degrees, sharpened with the Honbazuke method.
Is the HexClad utility knife dishwasher safe?
No. HexClad says hand wash only, and dishwasher use voids the warranty.
How long is the HexClad 5UTLK?
9.5 inches overall: a 5-inch blade and a 4.4-inch handle.
Does the HexClad warranty cover restaurant use?
No, foodservice use voids the lifetime warranty.
Featured in
See also
- asety 3 piece damascus knife set review
- babish birds beak paring knife review
- helens asian kitchen carbon steel chinese chef knife review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- delarlochef 5 ply stainless steel review
- huanyu no 5 stainless steel review
