HOSHANHO 10-Inch Hammered Rosewood Bread Knife Review: 12° Serrations
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The HOSHANHO 10-inch hammered bread knife pairs a long serrated blade with the clad build of HOSHANHO's gyutos: a 10Cr15MoV core wrapped in four layers of composite steel on each side, up to 62 HRC, a hand-forged hammered surface and an octagonal rosewood handle with a G10 joint at the blade. HOSHANHO lists deep serrations ground to 12 degrees on both sides and a weight of 7.36 ounces. The 10-inch length is meant to cross a large sourdough loaf in one pass, and the G10 joint is there so the handle front does not swell with moisture. Choose this hammered model if you want a wa-style octagonal handle and a clad 62 HRC blade; choose the HOSHANHO 10-inch sandalwood bread knife if you prefer a contoured Western handle and a 15-degree V edge. The details here come from HOSHANHO's listing and published specs; the knife was not used for this review.
What stands out
- 10-inch serrated blade
- Clad 10Cr15MoV core, up to 62 HRC
- 12-degree serrations on both sides
- Octagonal rosewood handle, G10 joint
- Hammered finish, 7.36 ounces
Who it fits
Good fit for
Buy it if you bake large sourdough loaves, want a long bread knife with an octagonal wooden handle, or like a matching look with HOSHANHO's hammered gyutos.
Who should skip it
Skip it if you want a dishwasher-safe bread knife, or a short knife for bagels and rolls.
Verdict: A clad, long bread knife with a wa-style handle.
HOSHANHO hammered bread knife specs explained
10-inch blade
Long enough for single-stroke slices through big boules.
Clad 10Cr15MoV, 62 HRC
A hard core between softer layers, the same sandwich HOSHANHO uses on its hammered gyutos.
12-degree serrations
Deep, acute teeth that grip a hard crust before the blade slides through.
G10 joint
A fiberglass ferrule at the blade end of the rosewood handle that resists moisture.
7.36 ounces
Lighter than HOSHANHO's sandalwood 10-inch bread knife.
HOSHANHO hammered bread knife build notes
The blade carries a hand-forged hammered surface over the 9-layer sandwich, which HOSHANHO says resists stains and food residue. The handle is octagonal rosewood with a G10 joint. The listing is filed under sashimi knives, but it is a serrated bread knife. No tang type or blade height is listed.
Slicing sourdough with the hammered 10-inch
Set the heel on the far crust and draw the full 10 inches back with light pressure; the deep serrations should catch the crust without crushing the crumb. It also cuts baguettes, bagels, cakes and pastries. Rinse and wipe it dry; HOSHANHO says the hammered surface cleans easily.
Before you buy the HOSHANHO hammered bread knife
Check you can store a 10-inch blade. Octagonal handles suit a pinch or hammer grip; if you prefer a rounded Western handle, look at HOSHANHO's sandalwood model. Serrations at 12 degrees are thin, so keep the knife off frozen bread.
Check before you buy
- You bake large sourdough loaves
- An octagonal rosewood handle suits you
- You want a clad 62 HRC bread knife
- You can store a 10-inch knife
The product at a glance
HOSHANHO 10-Inch Serrated Bread Knife
Best for: Large sourdough
- Blade Length
- 10 in
- Knife Type
- Bread
- Blade Material
- 10CR15MOV Steel
- Construction
- Hand-forged
- Edge Type
- Serrated
- Edge Angle
- 12°
View on Amazon: HOSHANHO 10-Inch Serrated Bread Knife Affiliate link
HOSHANHO 10-inch hammered bread knife: 9-layer clad 10Cr15MoV core up to 62 HRC, 12-degree serrations both sides, octagonal rosewood handle with G10 joint, 7.36 oz.
Pros
- Clad 62 HRC core
- Deep 12-degree serrations
- Moisture-proof G10 joint
Cons
- Needs 10-inch storage
- No tang listed
Good fit if
- You slice big boules
- You like wa handles
Skip if
- You want a short knife
- You want a rounded handle
Verdict: A long, clad bread knife with a wa-style handle.
Specifications side by side
| Spec | HOSHANHO 10-Inch Serrated Bread Knife |
|---|---|
| Blade Length | 10 in |
| Knife Type | Bread |
| Blade Material | 10CR15MOV Steel |
| Construction | Hand-forged |
| Edge Type | Serrated |
| Edge Angle | 12° |
| Blade Hardness | 62 HRC |
| Handle Material | Rosewood, G10 |
| Color | Silver |
| Style | Japanese |
| Weight | 7.36 ounces |
| Size | 10" |
| Model | 10 Inch Bread Knife |
Frequently asked questions
How long is the HOSHANHO hammered bread knife?
10 inches.
What steel is the HOSHANHO hammered bread knife?
A 10Cr15MoV core clad in four composite layers on each side, up to 62 HRC.
What angle are the serrations on the hammered model?
The hammered model has 12-degree serrations on each face.
What is the G10 joint on the HOSHANHO bread knife?
A fiberglass piece between blade and rosewood handle that does not swell with moisture.
How heavy is the hammered HOSHANHO bread knife?
7.36 ounces, as listed.
Featured in
See also
- hoshanho 10 inch sandalwood bread knife review
- hoshanho 8 inch damascus g10 chef knife review
- hoshanho nakiri knife 7 review
- hoshanho 8 inch matte chef knife review
- hoshanho fillet knife 7 inch review
- HOSHANHO 7-Inch Japanese Nakiri Knife Review: Specs, Pros and Cons
- HOSHANHO LOONG 3.75-Inch Paring Knife Review: Specs, Pros and Cons
- HOSHANHO 7-Inch Japanese Santoku Knife Review: Who It Fits and Who Should Skip It
- suicoey 10 inch tablet review
- jumxion 10 inch fan review
