HOSHANHO 7-Inch Damascus Santoku Knife Review: G10 Handle, 62-64 HRC
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The HOSHANHO HSHPCS-2023-002 is a 7-inch santoku with 67 layers of Damascus steel, 33 on each side of a 10Cr15CoMoV core, vacuum heat treated and cryogenically treated to 62-64 HRC. HOSHANHO hand-polishes the edge to 12-15 degrees, adds a double-sided hollow design against sticking and fits a fibreglass G10 handle. At 0.08 inches thick it is a thin, light santoku for push cuts through vegetables, boneless meat and fish. Choose the HSHPCS-2023-002 if you prefer a santoku's flat edge and a handle that ignores water; choose its sibling, the HOSHANHO HSHPCS-2023-001 8-inch Damascus chef with the same G10 handle and core, if you rock-chop or want more length for larger cuts. 10Cr15CoMoV is described as Japanese, though it is usually a Chinese-made grade. This is a reading of HOSHANHO's listing and published specs, not a hands-on report.
What stands out
- 62-64 HRC HSHPCS-2023-002 core
- 33 Damascus layers per side on the HOSHANHO santoku
- Hollow design to cut sticking
- Water-proof G10 HSHPCS-2023-002 handle
- Thin 0.08-inch santoku blade
Who it fits
Good fit for
Buy the HOSHANHO HSHPCS-2023-002 if you want a hard, thin Damascus santoku with a low-care G10 handle at a mid-range price.
Who should skip it
Skip the HSHPCS-2023-002 if you chop through bones or frozen food, prefer a wooden handle, or want a softer steel that is easier to touch up on a honing rod.
Verdict: A hard, thin Damascus santoku with a practical G10 handle.
HOSHANHO HSHPCS-2023-002 specs explained
HSHPCS-2023-002 blade: 7 in santoku, 0.08 in thick
Thin stock for clean push cuts and fine slices.
HSHPCS-2023-002 steel: 67-layer Damascus, 10Cr15CoMoV core
Cryo-treated cobalt-alloy core under a feather-pattern cladding.
HSHPCS-2023-002 hardness: 62-64 HRC
Keeps an edge a long time but can chip if twisted.
HSHPCS-2023-002 edge: 12-15 degrees, hollow sides
A fine edge plus relief to stop slices clinging.
HSHPCS-2023-002 weight: 0.52 lb in text, 12.6 oz in specs
About 8.3 oz for the knife; the larger figure likely includes the box.
HOSHANHO HSHPCS-2023-002 build
HOSHANHO forges the HSHPCS-2023-002 into a feather Damascus pattern and sandblasts the surface, then fits an ergonomic G10 handle; G10 is a glass-fibre laminate that does not swell, crack or need oil. The tang type is not stated, and neither is a warranty.
Using the HOSHANHO santoku
The flat santoku edge suits dicing onions, slicing cucumbers and peppers, cutting boneless chicken and portioning fish, with push or tap-chop strokes. At 62-64 HRC the edge holds well, so sharpen it on whetstones rather than pull-through sharpeners. Hand wash and dry it.
Before buying the HOSHANHO HSHPCS-2023-002
The weight is listed twice with different figures. No tang, warranty or care rules beyond the gift box are given. Very hard steel suits careful cooks; if you cut on glass or ceramic boards or scrape food with the edge, expect chips.
Check before you buy
- You push-cut with the HOSHANHO HSHPCS-2023-002
- A G10 HOSHANHO handle suits your kitchen
- You sharpen the HSHPCS-2023-002 on whetstones
- You keep the 62-64 HRC HOSHANHO edge off bones
The product at a glance
HOSHANHO 7 Inch Damascus Santoku Knife
Best for: Damascus santoku
- Blade Length
- 7 in
- Knife Type
- Santoku
- Blade Material
- Japanese 10Cr15CoMoV, Damascus steel
- Construction
- Forged, 67-layer Damascus
- Edge Type
- Double-sided hollow
- Edge Angle
- 12–15°
View on Amazon: HOSHANHO 7 Inch Damascus Santoku Knife Affiliate link
HOSHANHO HSHPCS-2023-002 7" Damascus santoku: 67 layers (33 per side) over a cryo-treated 10Cr15CoMoV core, 62-64 HRC, 12-15° edge, hollow sides, 0.08" thick, G10 handle. Weight 0.52 lb (text) vs 12.6 oz (specs).
Pros
- Hard 62-64 HRC HOSHANHO core
- Low-care G10 handle on the HSHPCS-2023-002
- Thin HOSHANHO blade for fine slices
Cons
- HSHPCS-2023-002 weight listed two ways
- Hard HOSHANHO edge can chip on bone
Good fit if
- You want a G10-handled HOSHANHO santoku
- You push-cut produce and fish with a HOSHANHO santoku
Skip if
- You rock-chop (see the HSHPCS-2023-001 chef)
- You want a wooden HOSHANHO handle
Verdict: A hard, thin Damascus santoku with a low-care G10 handle.
Specifications side by side
| Spec | HOSHANHO 7 Inch Damascus Santoku Knife |
|---|---|
| Blade Length | 7 in |
| Knife Type | Santoku |
| Blade Material | Japanese 10Cr15CoMoV, Damascus steel |
| Construction | Forged, 67-layer Damascus |
| Edge Type | Double-sided hollow |
| Edge Angle | 12–15° |
| Blade Hardness | 62–64 HRC |
| Handle Material | G10 |
| Color | Silver |
| Style | Japanese |
| Recommended Use | Vegetables, Meat |
| Weight | 12.6 ounces |
| Size | 7" |
| Model | HSHPCS-2023-002 |
Frequently asked questions
What steel is the HOSHANHO HSHPCS-2023-002 santoku?
A 10Cr15CoMoV core with 33 Damascus layers on each side, 62-64 HRC.
What is G10 on the HSHPCS-2023-002 handle?
A glass-fibre laminate that is water-proof, durable and needs no oiling.
Does the HOSHANHO HSHPCS-2023-002 have a hollow edge?
HOSHANHO describes a double-sided hollow design to reduce sticking.
How heavy is the HSHPCS-2023-002 santoku?
The text says 0.52 lb; the spec field says 12.6 oz, probably boxed.
HSHPCS-2023-002 santoku or HSHPCS-2023-001 chef?
The 7-inch santoku for push cuts; the 8-inch chef for rocking and larger cuts, same core and G10 handle.
See also
- curta 8 inch red commercial chef knife review
- shi ba zi zuo 7 3 inch forged cleaver knife review
- aisyoko 8 inch damascus chef knife review
- hoshanho 8 inch matte chef knife review
- hoshanho fillet knife 7 inch review
- HOSHANHO 7-Inch Japanese Nakiri Knife Review: Specs, Pros and Cons
- HOSHANHO LOONG 3.75-Inch Paring Knife Review: Specs, Pros and Cons
- HOSHANHO 7-Inch Japanese Santoku Knife Review: Who It Fits and Who Should Skip It
- best jointers with straight knife cutterhead
- pulsar gaming gears x2 crazylight wireless gaming review
