HOSHANHO 7-Inch Hand-Forged 9-Layer Fillet Knife (Octagonal Rosewood) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This HOSHANHO 7-inch fillet knife is the hand-forged, 9-layer version: a composite blade around a 10Cr15CoMoV core, listed at HRC 60 and hand-honed to 12 degrees, with a flat edge that curves up to a sharp point and enough flex to follow a fish's backbone. The octagonal handle combines rosewood with G10. Choose this forged 9-layer HOSHANHO if you fillet fish often and want the finer 12-degree edge and a Japanese-style octagonal handle; choose HOSHANHO's 7-inch powder-steel fillet knife if you want the harder 62 HRC steel and a rounded Pakkawood handle. This review uses HOSHANHO's listing and published specs; nothing here comes from hands-on testing.
What stands out
- 9-layer clad HOSHANHO blade, 10Cr15CoMoV core
- HRC 60 listed for the forged fillet
- Hand-honed 12-degree HOSHANHO edge
- Flexible, curved 7-inch fillet profile
- Octagonal rosewood and G10 HOSHANHO handle
Who it fits
Good fit for
Buy this forged HOSHANHO fillet knife if you clean fish or debone chicken often and want a thin, flexible 7-inch blade with a fine 12-degree edge.
Who should skip it
Skip the forged HOSHANHO fillet if you want a stiff boning knife for pork and beef, a dishwasher-safe knife, or a single named steel in both title and bullets.
Verdict: A thin, flexible forged fillet knife with a 12-degree edge and an octagonal handle.
HOSHANHO forged 7" fillet specs explained
HOSHANHO forged fillet blade 7 inches
Long enough for trout, bass and salmon sides.
10Cr15CoMoV core in 9 layers
A Chinese-made stainless grade; HOSHANHO calls it Japanese steel. The outer layers protect the core.
HRC 60 on the forged HOSHANHO
Harder than German boning knives; holds a fine edge but avoid twisting on bones.
12-degree HOSHANHO fillet edge
Very acute for clean cuts under skin and along ribs.
HOSHANHO octagonal rosewood + G10
G10 adds a water-resistant section to the wood handle.
HOSHANHO forged fillet build
HOSHANHO forges the blade from 9 layers of composite steel around a 10Cr15CoMoV core; the title says 10Cr15MoV, the bullets 10Cr15CoMoV. The flat edge rises in a slight curve to the tip, and the blade is thin enough to flex along bones. The handle is octagonal, rosewood with G10, and the listed weight is 4.97 oz. Tang type and dishwasher guidance are not given.
Filleting with the forged HOSHANHO
Run the 12-degree edge along the backbone of a trout or bass, then lay the blade flat to skin the fillet. The curve also helps lift chicken breasts and trim silver skin from tenderloin. For pork shoulder or beef bones, a stiffer boning knife is safer for the thin edge. Wash and dry by hand, since rosewood swells when soaked.
HOSHANHO forged fillet caveats
Steel naming differs between title (10Cr15MoV) and bullets (10Cr15CoMoV). No tang or care details. The listing does not give a flex rating, only that the blade is flexible. A 12-degree edge needs a whetstone or fine rod rather than a coarse pull-through sharpener.
Check before you buy
- Hand wash the rosewood HOSHANHO fillet handle
- Keep the 12-degree HOSHANHO edge off bones
- Sharpen the forged fillet on a whetstone
- Pick forged 12-degree or powder-steel 15-degree HOSHANHO by edge
The product at a glance
HOSHANHO 7-Inch Forged Fillet Knife
Best for: Fish filleting
- Blade Length
- 7 in
- Knife Type
- Fillet, Boning
- Blade Material
- 10Cr15MoV High Carbon Steel
- Construction
- Hand Forged
- Edge Angle
- 12°
- Blade Hardness
- 60 HRC
View on Amazon: HOSHANHO 7-Inch Forged Fillet Knife Affiliate link
HOSHANHO 7" hand-forged fillet: 9-layer clad blade, 10Cr15CoMoV core at HRC 60, 12-degree edge, flexible curved profile, octagonal rosewood and G10 handle, 4.97 oz.
Pros
- Fine 12-degree HOSHANHO fillet edge
- Flexible forged HOSHANHO blade
- Octagonal rosewood and G10 grip
Cons
- HOSHANHO steel name differs title vs bullets
- No tang or care info for the forged fillet
Good fit if
- You fillet fish often with HOSHANHO
- You want an octagonal Japanese-style fillet handle
Skip if
- You need a stiff boner instead of this HOSHANHO
- You want a dishwasher-safe HOSHANHO
Verdict: A thin, flexible forged fillet knife with a very fine edge.
Specifications side by side
| Spec | HOSHANHO 7-Inch Forged Fillet Knife |
|---|---|
| Blade Length | 7 in |
| Knife Type | Fillet, Boning |
| Blade Material | 10Cr15MoV High Carbon Steel |
| Construction | Hand Forged |
| Edge Angle | 12° |
| Blade Hardness | 60 HRC |
| Handle Material | G10, Rosewood |
| Color | Gray |
| Recommended Use | Boning, Meat |
| Weight | 4.97 ounces |
| Size | 7" |
| Model | 7 Inch Fillet Knife |
Frequently asked questions
What steel is the HOSHANHO forged 7-inch fillet knife?
A 9-layer composite blade with a 10Cr15CoMoV core, listed at HRC 60.
What edge angle does the forged HOSHANHO fillet have?
HOSHANHO lists a hand-honed 12-degree edge.
Is the forged HOSHANHO fillet knife flexible?
Yes, HOSHANHO describes a fine, flexible curved blade that follows the fish.
Forged 9-layer or powder-steel HOSHANHO 7-inch fillet?
The forged one for a 12-degree edge and octagonal rosewood handle; the powder-steel one for 62 HRC and a Pakkawood handle.
What is the forged HOSHANHO fillet handle made of?
Rosewood with G10, in an octagonal shape.
