As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HOSHANHO 7-Inch Powder Steel Flexible Fillet Knife Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The HOSHANHO 7-inch powder steel fillet knife is a slender, flexible blade in Japanese high-carbon powder steel listed at 62 HRC, hand ground to 15 degrees per side with a sharp tapered tip for working along bones and under skin. The handle is high-density Pakkawood, and the wave pattern on the blade is laser engraved, not Damascus. It weighs 5.28 oz. Choose this powder-steel HOSHANHO if you want the hardest edge of HOSHANHO's 7-inch fillet knives and a rounded Pakkawood handle; choose HOSHANHO's hand-forged 9-layer 7-inch fillet if you prefer a 12-degree edge and an octagonal rosewood and G10 handle. This review draws on HOSHANHO's listing and published specs only; we did not test the knife.

What stands out

  • 62 HRC powder steel in the HOSHANHO fillet
  • 15-degree edge with a tapered tip
  • Flexible 7-inch HOSHANHO blade
  • Pakkawood fillet handle
  • Laser-engraved wave, not Damascus

Who it fits

Good fit for

Buy the HOSHANHO powder steel fillet knife if you fillet, skin and butterfly fish and chicken often and want an edge that stays sharp through a long session.

Who should skip it

Skip the powder-steel HOSHANHO fillet if you want a stiff boner for pork and beef, a named steel grade, or a dishwasher-safe fillet knife.

Verdict: A hard, flexible 7-inch fillet knife with a 15-degree edge.

HOSHANHO powder steel fillet specs explained

HOSHANHO fillet blade 7 inches

Fits most freshwater fish and chicken breasts.

Powder steel at 62 HRC

Harder than most fillet knives; the grade is not named.

15 degrees per side on the HOSHANHO fillet

Clean cuts under skin and along ribs.

Flexible, tapered HOSHANHO fillet tip

Bends to follow bones and gets into joints.

HOSHANHO fillet weight 5.28 oz

Light and easy to steer for long work.

HOSHANHO powder steel fillet build

The blade is slender, flexible and ground to 15 degrees on each side, ending in a sharp tapered tip. HOSHANHO says the powder steel is high carbon, 62 HRC, corrosion and wear resistant; the wave pattern is laser engraved. The handle is a non-expanding Pakkawood composite. No tang, flex rating or dishwasher guidance is listed.

Filleting with the 7-inch powder steel HOSHANHO

Use it to fillet and skin trout, bass and snapper, butterfly chicken breasts, remove silver skin from pork tenderloin and trim fat from steaks. The flex lets the blade ride along a fish's backbone. A 62 HRC edge can chip if twisted against heavy bones, so keep a sturdier boning knife for joints. Wash and dry by hand.

HOSHANHO powder steel fillet caveats

Powder-steel grade not named. The listing calls it both a fillet and a boning knife, but the blade is flexible, which suits fish and poultry more than red meat. No tang or care details.

Check before you buy

  • Keep the 62 HRC HOSHANHO fillet off heavy bones
  • Hand wash and dry the HOSHANHO Pakkawood fillet
  • Hone the powder steel HOSHANHO with a ceramic rod
  • Choose powder-steel or forged HOSHANHO fillet by handle

The product at a glance

HOSHANHO 7-Inch Flexible Japanese Fillet Knife

Best for: Fish and poultry

Blade Length
7 in
Knife Type
Fillet knife
Blade Material
Japanese high carbon powder steel
Edge Angle
15° per side
Blade Hardness
62 HRC
Handle Material
Pakkawood

View on Amazon: HOSHANHO 7-Inch Flexible Japanese Fillet Knife Affiliate link

HOSHANHO 7" powder steel fillet: flexible blade in high-carbon powder steel at 62 HRC, 15-degree edge, tapered tip, Pakkawood handle, laser-engraved wave, 5.28 oz.

Pros

  • 62 HRC HOSHANHO fillet edge lasts
  • Flexible tapered HOSHANHO tip
  • Light 5.28 oz HOSHANHO fillet

Cons

  • HOSHANHO powder-steel grade unnamed
  • Hard HOSHANHO fillet edge can chip on bones

Good fit if

  • You fillet fish weekly with a HOSHANHO
  • You want a hard-steel HOSHANHO fillet

Skip if

  • You debone beef with a HOSHANHO fillet
  • You want an octagonal HOSHANHO handle

Verdict: A hard, flexible fillet knife for fish and poultry.

Specifications side by side

Spec HOSHANHO 7-Inch Flexible Japanese Fillet Knife
Blade Length 7 in
Knife Type Fillet knife
Blade Material Japanese high carbon powder steel
Edge Angle 15° per side
Blade Hardness 62 HRC
Handle Material Pakkawood
Blade Flexibility Flexible
Color Silver
Style Japanese
Recommended Use Boning, Meat
Weight 5.28 ounces
Size 7"
Model 7 Inch Fillet Knife

Frequently asked questions

Is the HOSHANHO 7-inch powder steel fillet knife flexible?

Yes, HOSHANHO describes the blade as flexible and slender.

How hard is the HOSHANHO powder steel fillet knife?

HOSHANHO lists 62 HRC.

Is the HOSHANHO powder steel fillet Damascus?

No. The wave pattern is laser engraved, per HOSHANHO.

Powder-steel or forged 9-layer HOSHANHO 7-inch fillet?

Powder steel for 62 HRC and a Pakkawood handle; forged 9-layer for a 12-degree edge and an octagonal rosewood and G10 handle.

Can the HOSHANHO powder steel fillet debone meat?

It trims and debones poultry and pork well; heavy beef bones call for a stiffer knife.

See also