As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

KANKA 10-Inch Damascus Chef Knife Review: 10Cr15CoMoV Core, G10 Handle

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The KANKA 10-inch chef knife is an extra-long Damascus gyuto: 67 layers around a 10Cr15CoMoV high-carbon stainless core, hardened up to 62 HRC and hand-finished to 15 degrees per side. The blade is 2.2 mm thick, the knife weighs 268 grams, and the black G-10 fibreglass handle is triple riveted. It comes with a magnetic wood sheath and a gift box. The 10-inch length is the reason to pick it: it slices large roasts, melons and big piles of vegetables in fewer strokes than an 8-inch knife, and the sheath protects that long edge in a drawer. Choose the KANKA if you want a long Damascus chef knife with a waterproof G-10 grip and a sheath; choose the BRODARK IL60604 if 8 inches and a VG-10 core at 7.05 oz suit your board better. We wrote this from KANKA's listing and published specs, without hands-on use.

What stands out

  • 10-inch Damascus chef knife by KANKA
  • 67 layers, 10Cr15CoMoV core, up to 62 HRC
  • 15 degrees per side, 2.2 mm thick
  • Triple-riveted G-10 handle, 268 g
  • Magnetic wood sheath, gift box

Who it fits

Good fit for

Buy it if you have a large board and want a long, sheathed Damascus chef knife for big roasts and batch prep.

Who should skip it

Skip it if you have a small board, prefer a nimble 8-inch knife, or want a Japanese-made VG-10 or SG2 core.

Verdict: An extra-long Damascus chef knife with a G-10 grip and a sheath.

KANKA 10-inch specs explained

10Cr15CoMoV core under 67 KANKA layers

A Chinese cobalt-alloy stainless that holds a fine edge; the outer layers give the pattern.

Up to 62 HRC on the KANKA blade

Hard for long edge life; avoid twisting through bone.

2.2 mm KANKA blade stock

Thin enough to slice cleanly despite the 10-inch length.

268 g for the 10-inch KANKA

Heavier than most 8-inch knives, so the weight helps long cuts.

Triple-riveted G-10 KANKA handle

Fibreglass resin that shrugs off water and does not swell.

KANKA chef knife build

The KANKA pairs a 67-layer Damascus blade with a black G-10 handle fixed by three rivets; KANKA says the handle is shaped for balance and grip security. The included wood sheath closes with magnets. The listing's width and height fields (25 and 20 inches) are box values, so ignore them.

Slicing with the KANKA 10-inch

Use the full length for carving roasts and brisket, halving melons and squash, and rock-chopping big batches of herbs and onions. For small work such as peeling or trimming, a paring knife is easier. Hand wash, dry, and slide it back into the sheath.

Before you buy the KANKA Damascus chef knife

A 10-inch blade needs a deep board and a long drawer or strip; the sheath helps with the drawer. Keep a whetstone at 15 degrees to maintain the edge. If you have small hands, an 8-inch knife will feel quicker.

Check before you buy

  • You carve roasts or prep in volume
  • A deep board takes the 10-inch KANKA
  • A sheath suits your storage
  • A G-10 handle appeals to you

The product at a glance

KANKA 10 In Damascus Chef Knife

Best for: Carving and batch prep

Blade Length
10 in
Knife Type
Chef
Blade Material
10Cr15CoMoV Damascus steel
Construction
67 layers
Edge Angle
15° per side
Blade Hardness
Up to 62 HRC

View on Amazon: KANKA 10 In Damascus Chef Knife Affiliate link

KANKA 10 in Damascus chef knife: 67 layers with a 10Cr15CoMoV core, up to 62 HRC, 15 degrees per side, 2.2 mm, 268 g, triple-riveted black G-10 handle, magnetic wood sheath, gift box.

Pros

  • Long 10-inch slicing reach
  • Waterproof G-10 handle
  • Magnetic wood sheath

Cons

  • Too long for small boards
  • Hard edge can chip if twisted

Good fit if

  • You carve and batch-prep
  • You want a sheathed knife

Skip if

  • You want a nimble 8-inch
  • You have a small board

Verdict: A long Damascus chef knife with a sheath for big jobs.

Specifications side by side

Spec KANKA 10 In Damascus Chef Knife
Blade Length 10 in
Knife Type Chef
Blade Material 10Cr15CoMoV Damascus steel
Construction 67 layers
Edge Angle 15° per side
Blade Hardness Up to 62 HRC
Handle Material G-10 fiberglass
Storage Type Sheath
Color Black
Dimensions 10 × 25 × 20 inches
Weight 10.8 ounces
Size 10"
Model 860014906992

Frequently asked questions

What steel is the KANKA chef knife?

67-layer Damascus with a 10Cr15CoMoV high-carbon stainless core.

How hard is the KANKA blade?

KANKA says up to 62 HRC.

How heavy is the KANKA 10-inch chef knife?

268 grams, with a 2.2 mm thick blade.

Does the KANKA come with a sheath?

Yes, a magnetic wood sheath and a gift box.

What is the KANKA handle made of?

Black G-10 fibreglass, triple riveted.

See also