Kanngou KG8304 7-Inch AUS-8 Nakiri Knife Review: Kurouchi Finish, Ebony and Sandalwood Handle
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Kanngou KG8304 is a 7-inch nakiri, a flat-edged Japanese vegetable knife, in AUS-8 steel at HRC 59 ± 2. It has a black-forged kurouchi finish with a nashiji hammered texture to cut friction, a micro-concave edge, and a WA-series handle of ebony and red sandalwood, packed in a gift box. It is our pick for cooks who chop a lot of vegetables and want a tough, easy-to-sharpen Japanese steel rather than a harder, more brittle one. Choose the KG8304 if most of your board work is onions, cabbage, carrots and herbs; choose Kanngou's KG8300 8.27-inch AUS-8 gyuto if you also slice meat and fish and want a pointed tip. The listing's size field says 8 and one bullet calls it a gyuto, but the title and shape are a 7-inch nakiri. This review draws on the Kanngou listing only; the knife was not tested.
What stands out
- 7-inch Kanngou KG8304 nakiri blade
- KG8304 nakiri in AUS-8, HRC 59 ± 2
- Kurouchi nashiji black-forged finish
- Micro-concave Kanngou KG8304 edge
- Ebony and red sandalwood WA handle, gift box
Who it fits
Good fit for
Buy the Kanngou KG8304 if you want a flat 7-inch vegetable knife with a rustic black-forged finish, a tough AUS-8 edge that is easy to touch up, and a wooden WA handle.
Who should skip it
Skip the KG8304 if you need a pointed tip for meat, fish or detail work (the KG8300 gyuto suits that), prefer a harder steel that holds an edge longer, or want a synthetic handle.
Verdict: A tough AUS-8 nakiri with a black-forged face and a wooden WA handle.
Kanngou KG8304 nakiri specs explained
Kanngou KG8304 blade: 7 in nakiri, flat edge
Full-length board contact for push-chopping vegetables.
Kanngou KG8304 steel: AUS-8, HRC 59 ± 2
Tough and corrosion resistant; easy to resharpen.
Kanngou KG8304 finish: kurouchi nashiji
Black-forged, pear-skin texture to reduce drag.
Kanngou KG8304 edge: micro-concave
Kanngou's thin grind; the "nearly zero degree" claim is marketing.
Kanngou KG8304 handle: ebony and red sandalwood
Two-wood WA-series grip; weight field 14.1 oz likely boxed.
Kanngou KG8304 build
Kanngou forges the KG8304 from AUS-8, a Japanese stainless alloy, and gives HRC 59 ± 2. The blade has a kurouchi (black-forged) finish combined with a nashiji hammered texture, which Kanngou says adds rust resistance and reduces friction. The edge uses a micro-concave grind. The handle blends ebony and red sandalwood in Kanngou's WA series. The listing does not give the tang type or blade height, and its size field (8) and one bullet calling it a gyuto do not match the 7-inch nakiri in the title.
Chopping with the Kanngou 7-inch nakiri
A nakiri works with straight up-and-down or push cuts: the flat edge meets the board along its whole length, so slices of cabbage, leek and cucumber come apart fully. The square tip is not for piercing or boning, and the blade is for boneless food only. AUS-8 at 59 HRC is forgiving to sharpen on a medium stone. Hand wash and dry it so the kurouchi finish stays even, and oil the wood handle occasionally.
Before buying the Kanngou KG8304
The size field says 8 but the title says 7 inches; the title matches the nakiri shape. Kanngou's "nearly zero degree" edge is not a real angle spec. No tang is listed.
Check before you buy
- You chop mostly vegetables with a Kanngou KG8304
- You like the kurouchi nashiji look
- You will hand wash the KG8304's wood handle
- AUS-8 at 59 HRC suits your sharpening
The product at a glance
Kanngou 7 Inch Nakiri AUS-8
Best for: Vegetable chopping nakiri
- Blade Length
- 7 in
- Knife Type
- Nakiri
- Blade Material
- AUS-8 alloy steel
- Construction
- Black-forged
- Edge Type
- Micro-concaved
- Edge Angle
- Nearly zero-degree
View on Amazon: Kanngou 7 Inch Nakiri AUS-8 Affiliate link
Kanngou KG8304 (WA series): 7" nakiri, AUS-8 at HRC 59 ± 2, kurouchi nashiji black-forged finish, micro-concave edge, ebony and red sandalwood handle, gift box; size field 8 and a gyuto bullet conflict with the title; no tang listed.
Pros
- Flat 7-inch Kanngou KG8304 chopping edge
- Easy-to-sharpen KG8304 AUS-8 steel
- Kanngou ebony and sandalwood WA grip
Cons
- KG8304 size field and bullets conflict
- No tang listed for the Kanngou KG8304
Good fit if
- You chop vegetables daily with a KG8304
- You want a black-forged Kanngou nakiri
Skip if
- You need a pointed tip (see KG8300)
- You want harder steel than AUS-8
Verdict: A tough, easy-care AUS-8 nakiri with a rustic black finish.
Specifications side by side
| Spec | Kanngou 7 Inch Nakiri AUS-8 |
|---|---|
| Blade Length | 7 in |
| Knife Type | Nakiri |
| Blade Material | AUS-8 alloy steel |
| Construction | Black-forged |
| Edge Type | Micro-concaved |
| Edge Angle | Nearly zero-degree |
| Blade Hardness | HRC 59±2 |
| Handle Material | Ebony and red sandalwood |
| Color | Black |
| Style | Japanese |
| Recommended Use | Vegetables |
| Dimensions | 12.2 × 1.57 × 0.79 inches |
| Weight | 14.1 ounces |
| Size | 8 |
| Model | KG8304 |
Frequently asked questions
What steel is the Kanngou KG8304 nakiri?
Kanngou uses AUS-8 for the KG8304 nakiri and rates it at HRC 59 ± 2.
Is the Kanngou KG8304 a nakiri or a gyuto?
A 7-inch nakiri; one bullet says gyuto, but the title and shape are a nakiri.
What finish does the Kanngou KG8304 have?
A black-forged kurouchi finish with a nashiji hammered texture.
Kanngou KG8304 nakiri or KG8300 gyuto?
The KG8304 for vegetable chopping with a flat edge; the KG8300 8.27-inch gyuto for meat, fish and tip work.
What is the Kanngou KG8304 handle made of?
A blend of ebony and red sandalwood, WA series.
Featured in
See also
- uprichya left handed bread bow knife review
- dispatch 8 9 inch salmon fillet knife review
- pranski 14 5 inch brown acacia bread bow knife review
- kanngou 8 27 inch japanese chef review
- kanngou vg10 damascus chef knife review
- Kanngou KG8101 8.27-Inch AUS-8 Gyuto Chef Knife Review: Classic Series
- lenovo tab one 8 7 inch tablet review
- sanpyl 5 7 inch android 8 1 review
