Made In Japanese Damascus Gyuto (VG-10, CUT-8-KNF-JP) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Made In CUT-8-KNF-JP is a Japanese gyuto forged in Seki: a VG-10 core inside 66 layers of Damascus steel, a 15-degree edge, a full tang and a black POM handle in Western style. The title says 8 inches, but Made In's own spec line gives a 7 1/4-inch blade, 1 11/16 inches tall and 2.3mm thick, 13 3/8 inches overall and 7.25 oz. Choose the Made In gyuto if you want a VG-10 Damascus blade with a full-tang Western handle that tolerates moisture better than wood; choose the Yoshihiro NSGY210AHMS if you prefer a lighter 4.8 oz gyuto with a longer 210mm blade and a traditional octagonal rosewood handle. We based this on Made In's listing and published specs and did not test the knife.
What stands out
- VG-10 core, 66 Damascus layers, Made In
- 15-degree CUT-8-KNF-JP edge
- Full tang with black POM handle
- Forged in Seki, Japan
- 7 1/4" blade, 7.25 oz per Made In's spec line
Who it fits
Good fit for
Buy the Made In gyuto if you want a Seki-forged VG-10 chef knife with a full-tang synthetic handle and the balance of a Western knife.
Who should skip it
Skip the Made In CUT-8-KNF-JP if you need a true 8-inch blade, want a wooden Wa handle, or want a lower-priced VG-10 knife.
Verdict: A Seki-forged VG-10 Damascus gyuto with a full-tang POM handle.
Made In CUT-8-KNF-JP specs explained
Made In blade 7 1/4" (title 8", size 8.2")
Shorter than most 8-inch gyutos; the title figure is likely the rounded total of a different measurement.
Made In blade height 1 11/16", 2.3mm thick
A slim, light gyuto profile for push cuts and slicing.
VG-10 core in 66 layers
Japanese stainless core that holds an edge; the layers make the wave pattern.
Made In edge angle 15 degrees
Sharper than most German knives.
Full tang, black POM on the Made In gyuto
Synthetic handle that shrugs off water better than wood.
Made In Damascus gyuto build
Made In has the knife forged in Seki, Japan, from a single rod for a full tang, with 66 total layers of folded steel around a VG-10 core. The handle is black POM, a hard plastic common on Western-style Japanese knives. The weight is 7.25 oz in the spec line and 7 oz in the size field. No HRC is listed.
Cooking with the Made In gyuto
The thin blade suits slicing onions, peppers and chicken, mincing herbs and portioning fish. At 7 1/4 inches it handles home cutting boards well but runs short for wide cabbages or large roasts. Keep the VG-10 edge away from bones and frozen food, and wash and dry by hand.
Made In CUT-8-KNF-JP caveats
Blade length conflict: title 8 inches, size field 8.2 inches, spec line 7 1/4 inches. No HRC. No dishwasher guidance; hand washing is safest for a 15-degree VG-10 edge.
Check before you buy
- Check the Made In blade length: 7 1/4 inches
- Hand wash the Made In gyuto
- Use a whetstone for the Made In VG-10 edge
- Pair the Made In gyuto with a bread knife
The product at a glance
Made In 8-Inch Damascus Gyuto Knife
Best for: Western-grip VG-10 fans
- Blade Length
- 7 1/4 in
- Knife Type
- Gyuto
- Blade Material
- VG-10 core, Damascus steel
- Construction
- Forged, 66-layer Damascus
- Edge Angle
- 15°
- Handle Material
- POM
View on Amazon: Made In 8-Inch Damascus Gyuto Knife Affiliate link
Made In CUT-8-KNF-JP gyuto: VG-10 core, 66 Damascus layers, 15-degree edge, full tang, black POM handle, forged in Seki; blade 7 1/4" per spec line (title 8"), 7.25 oz.
Pros
- Seki-forged VG-10 Made In blade
- Full-tang Made In POM handle
- Made In lists blade height and thickness
Cons
- Made In blade shorter than the title
- No HRC for the Made In gyuto
Good fit if
- You want a Western-handled Made In gyuto
- You cook on a home-size board with the Made In
Skip if
- You need a full 8-inch, not the Made In's 7 1/4
- You want a wooden Wa handle instead of Made In POM
Verdict: A Seki-made VG-10 gyuto with a Western full-tang handle.
Specifications side by side
| Spec | Made In 8-Inch Damascus Gyuto Knife |
|---|---|
| Blade Length | 7 1/4 in |
| Knife Type | Gyuto |
| Blade Material | VG-10 core, Damascus steel |
| Construction | Forged, 66-layer Damascus |
| Edge Angle | 15° |
| Handle Material | POM |
| Style | Japanese |
| Weight | 7 ounces |
| Size | 8.2" |
| Color | Truffle Black |
| Model | CUT-8-KNF-JP |
Frequently asked questions
How long is the Made In Japanese gyuto blade?
Made In's spec line says 7 1/4 inches, though the title says 8 inches and the size field 8.2 inches.
What steel is the Made In Damascus gyuto?
A VG-10 core with 66 total layers of Damascus steel; no HRC is listed.
Where is the Made In gyuto made?
Forged in Seki, Japan.
Is the Made In CUT-8-KNF-JP full tang?
Yes, Made In says it is crafted from a single rod of metal for a full tang.
Made In gyuto or Yoshihiro NSGY210AHMS?
The Made In for a full-tang POM Western handle; the Yoshihiro for a lighter, longer gyuto with a rosewood Wa handle.
