Masahiro 5.9-Inch Honesuki Boning Knife Review (2026): Seki Carbon Steel
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Masahiro 150mm honesuki is a triangle-type Japanese boning knife, made in Seki City, Gifu, for breaking down poultry. The listing gives a 5.9-inch (150mm) blade that is 2.5mm thick, Japanese carbon steel, a natural rose wood handle with the tang running its full length, and a weight of 0.13 kg (4.5 ounces). A honesuki is stiff and triangular, with a tall heel and a narrow point, so it works around chicken joints rather than bending along fish bones. The listing is filed under a 'Product of Gifu Japan' brand name, but the knife is a Masahiro. Choose this Masahiro if you break down whole chickens and are happy to wipe and dry a carbon steel blade after use; choose the HOSHANHO 6-inch boning knife if you want a stainless 10Cr15CoMoV blade that is easier to care for. We wrote it from the Masahiro listing and its published specs, not from use.
What stands out
- 150mm (5.9-inch) triangle honesuki
- 2.5mm blade thickness
- Japanese carbon steel
- Rose wood handle, full-length tang
- Made in Seki City, Gifu
Who it fits
Good fit for
Buy it if you joint chickens or ducks often, want a stiff Japanese poultry knife, and do not mind drying a carbon blade.
Who should skip it
Skip it if you want a flexible fillet knife, a dishwasher-proof knife, or a blade that will not rust.
Verdict: A Seki-made carbon steel honesuki for poultry.
Masahiro honesuki specs explained
Triangle type
The Masahiro has a tall heel narrowing to a fine point: the heel scrapes along bone, the tip finds the joint.
2.5mm thick
A stiff spine that will not flex like a Western fillet knife.
Japanese carbon steel
Takes a keen edge but rusts and stains unless the Masahiro is dried after use.
Hon-toshi tang
The tang runs through the whole rose wood handle.
0.13 kg
About 4.5 ounces: a light knife for its thickness.
Masahiro build notes
Masahiro lists a natural rose wood handle with a hon-toshi (full-length) tang and a carbon steel blade from Seki, a well-known cutlery town. The listing does not give the steel grade, hardness, bevel (single or double) or edge angle, and its bullets are short. Masahiro also sells a title-only listing (13406) of what looks like the same 150mm triangle honesuki.
Breaking down poultry with a honesuki
Use the Masahiro's tip to find and cut through the joint at the thigh and wing, then use the heel to scrape meat off the frame. Hold it in a reverse or hammer grip for the heavier cuts; do not chop through bone, which can chip a hard carbon edge. Wipe the blade during work and dry it straight after: carbon steel and raw chicken juices leave stains fast.
Before you buy the Masahiro honesuki
Plan for carbon steel care: hand wash, dry at once and oil the blade if you store it for a while. The bevel is not stated, so ask the seller if you are left-handed. A honesuki is a poultry tool; for brisket trimming or fish, a longer Western boner or a fillet knife fits better.
Check before you buy
- You break down whole birds weekly
- Masahiro carbon steel care suits you
- You want a stiff triangular boner
- You prefer a Masahiro rose wood handle
The product at a glance
Masahiro 5.9-Inch Honesuki Boning Knife
Best for: Breaking down chickens
- Blade Length
- 5.9 in (150 mm)
- Knife Type
- Honesuki Boning Knife
- Blade Material
- Japanese carbon steel
- Handle Material
- Natural wood (rose)
- Color
- Silver
- Weight
- 4.5 ounces
View on Amazon: Masahiro 5.9-Inch Honesuki Boning Knife Affiliate link
Masahiro 150mm (5.9 in) triangle honesuki: Japanese carbon steel, 2.5mm blade, rose wood handle with full-length tang, 0.13 kg, made in Seki. No steel grade, HRC or bevel listed.
Pros
- Seki-made poultry boner
- Stiff 2.5mm triangle blade
- Full-length tang in rose wood
Cons
- Carbon steel needs drying
- Bevel and steel grade not listed
Good fit if
- You joint whole chickens
- You care for carbon steel
Skip if
- You want stainless
- You need a flexible fillet blade
Verdict: A Japan-made carbon honesuki for poultry work.
Specifications side by side
| Spec | Masahiro 5.9-Inch Honesuki Boning Knife |
|---|---|
| Blade Length | 5.9 in (150 mm) |
| Knife Type | Honesuki Boning Knife |
| Blade Material | Japanese carbon steel |
| Handle Material | Natural wood (rose) |
| Color | Silver |
| Style | Japanese |
| Recommended Use | Boning |
| Weight | 4.5 ounces |
| Size | 5.9" |
Frequently asked questions
What is a honesuki?
A stiff, triangular Japanese boning knife made mainly for poultry.
What steel is the Masahiro honesuki?
Japanese carbon steel; the listing names no grade.
Will the Masahiro honesuki rust?
Carbon steel can rust or stain; wash and dry it straight after use.
Where is the Masahiro boning knife made?
In Seki City, Gifu Prefecture, Japan.
How thick is the Masahiro 150mm blade?
2.5mm, according to the listing.
See also
- hoshanho 8 inch gyuto chef review
- hoshanho bread knife 8 inch review
- hoshanho 8 inch kurouchi chef knife review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- adj products review
- magma products review
