Mercer Asian Collection M21020 8-Inch Chinese Chef's Knife Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Mercer Culinary M21020 is an 8-inch Chinese chef's knife from Mercer's Asian Collection: a tall, rectangular blade in high-carbon German steel with a dual-bevel, taper-ground edge and a Santoprene handle. Mercer lists cutting through thin or soft bones and hard vegetables such as squash as its jobs, so it sits between a vegetable cleaver and a light meat cleaver. The tall blade also works as a scoop for moving chopped food to the pan. Choose the M21020 if you want one wide blade for vegetables, herbs and boneless or small-bone meat; choose a heavy meat cleaver if you split thick pork or beef bones, which this taper-ground blade is not built for. Based on Mercer's M21020 listing, not on hands-on use.
What stands out
- Tall 8-inch M21020 blade scoops food off the board
- Dual-edge taper grind on the M21020
- Santoprene grip for wet hands
- High-carbon German steel in a Chinese-style blade
Who it fits
Good fit for
Buy the M21020 if you cook stir-fries, chop a lot of vegetables and like a wide blade you can crush garlic with and use to carry food to the wok.
Who should skip it
Skip the M21020 if you need to chop through thick bones, prefer a pointed chef's knife for detail work, or want dishwasher-safe cutlery.
Verdict: A practical Chinese chef's knife for vegetables, herbs and light bones.
Mercer M21020 specs explained
8-inch tall rectangular blade
Chops, slices and doubles as a bench scraper for prepped food.
Taper ground, fine stone finish
Mercer says the M21020's dual edge is ground for a sharp, even bevel.
High-carbon German steel
Common Mercer steel choice; no hardness figure is listed.
Santoprene M21020 handle
Soft, grippy material that Mercer says stays secure with wet hands.
How the M21020 is built
The M21020 uses the tall, flat Chinese chef's profile rather than a pointed Western tip, with a dual-bevel edge that Mercer taper grinds and finishes on fine stone. The steel is high-carbon German steel. The handle is Santoprene, a soft rubber-like material that grips well when hands are wet or oily. The listing gives a 10.2-ounce weight and 15.8 inches overall; it does not list blade height, thickness or hardness.
Where the M21020 fits in a kitchen
Use it for slicing onions and peppers, chopping herbs, cutting squash and root vegetables, smashing garlic or ginger with the flat, and slicing boneless meat thin for stir-fries. Mercer says it can cut thin or soft bones such as chicken wings; keep heavy chopping through beef or pork bones for a thick cleaver so the edge does not chip.
Before you buy the Mercer M21020
Plan storage for a tall blade, since many blocks have narrow slots. Mercer asks for hand washing with warm water and mild soap and drying right away; no dishwasher and no soaking. Sharpen it on a whetstone or with a pull-through suited to a straight, dual-bevel edge.
Check before you buy
- You chop mostly vegetables with the M21020
- Your block or rack takes a tall cleaver blade
- You avoid heavy bones with the M21020
- You will hand dry the Asian Collection blade
The product at a glance
Mercer Culinary 8-Inch Santoprene Chinese Chef's Knife
Best for: Vegetable chopping
- Blade Length
- 8 in
- Knife Type
- Chinese Chef's
- Blade Material
- High-carbon German steel
- Edge Type
- Dual-edge, taper-ground
- Handle Material
- Santoprene
- Dimensions
- 15.8 × 1.13 × 5 inches
View on Amazon: Mercer Culinary 8-Inch Santoprene Chinese Chef's Knife Affiliate link
Mercer Asian Collection M21020: 8-inch Chinese chef's knife, high-carbon German steel, taper-ground dual edge, Santoprene handle, 10.2 oz listed.
Pros
- Tall M21020 blade for chopping and scooping
- Grippy Santoprene handle
- Handles squash and thin bones
Cons
- Not for thick bones
- Hand wash only, tall blade storage
Good fit if
- You cook a lot of stir-fries
- You want a wide vegetable blade
Skip if
- You split pork or beef bones
- You prefer a pointed tip
Verdict: A wide, grippy Chinese chef's knife for vegetable-heavy cooking.
Specifications side by side
| Spec | Mercer Culinary 8-Inch Santoprene Chinese Chef's Knife |
|---|---|
| Blade Length | 8 in |
| Knife Type | Chinese Chef's |
| Blade Material | High-carbon German steel |
| Edge Type | Dual-edge, taper-ground |
| Handle Material | Santoprene |
| Style | Chinese |
| Dimensions | 15.8 × 1.13 × 5 inches |
| Weight | 10.2 ounces |
| Size | 8" |
| Color | Santoprene Handle |
| Model | M21020 |
Frequently asked questions
Is the Mercer M21020 a meat cleaver?
It is a Chinese chef's knife. Mercer says it cuts thin or soft bones and hard vegetables, not heavy bones.
What steel is the M21020 made of?
High-carbon German steel, taper ground with a fine stone finish, per Mercer.
Is the M21020 single or double bevel?
Mercer lists a dual-edge blade, so it suits left- and right-handed cooks.
What is Santoprene on the M21020 handle?
A soft, grippy thermoplastic rubber that Mercer says gives a secure hold even with wet hands.
Can the M21020 go in the dishwasher?
No. Mercer's care note for the M21020 is hand washing, towel drying and no soaking.
Featured in
See also
- mercer culinary zum forged boning knife review
- mercer millennia 3 25 inch clip point paring knife review
- mercer culinary m18135bk serrated bread knife review
- mercer culinary m22707 millennia black handle review
- mercer culinary ultimate white review
- Mercer Culinary Genesis M20508 8-Inch Bread Knife Review: Who It Fits and Who Should Skip It
- Mercer Culinary Renaissance M23590 7-Inch Forged Santoku Review (2026): A Spec-Based Look
- Mercer Culinary Millennia M22206RD 6-Inch Narrow Boning Knife Review: Specs, Pros and Cons
- lodge chef collection cast iron review
- culinary chef 300w personal blender review
