MOSFiATA TD1705 17-Piece Stainless Knife Block Set Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The MOSFiATA TD1705 is a 17-piece all-steel block set: the handles are cast in one piece with the blades, so there is no wood or plastic to crack or loosen. It holds an 8-inch chef's knife, 7-inch santoku, 8-inch bread knife, 8-inch carving knife, 5-inch utility knife, 3.5-inch paring knife and six 5-inch steak knives, plus an 8-inch sharpening rod, 4-inch scissors, a finger guard, a cleaning wipe and a painted wood block. The steel is 5Cr15MoV with 0.5-0.55% carbon and 56+ HRC, hand-edged at 13-15 degrees, and MOSFiATA calls the set dishwasher safe. Choose the TD1705 if you want one-piece steel knives you can put in the dishwasher, with a carving knife and six steak knives; choose the Martha Stewart Lockton 16 if you prefer forged, riveted handles and eight steak knives and will hand wash. The same set also sells with a gold titanium-plated finish. This review uses MOSFiATA's listing, not hands-on testing.
What stands out
- MOSFiATA TD1705: one-piece cast steel handles
- Carving knife plus six 5-inch steak knives
- 5Cr15MoV, 0.5-0.55% carbon, 56+ HRC
- 13-15 degree hand-finished MOSFiATA edge
- Rod, scissors, finger guard and wipe included
Who it fits
Good fit for
Buy the MOSFiATA TD1705 if you want a big all-steel block set that can go in the dishwasher and includes a carving knife.
Who should skip it
Skip the MOSFiATA TD1705 if you prefer warm wood or resin handles, or want forged blades with a higher hardness.
Verdict: All-steel 17-piece block set with a carving knife and dishwasher-safe claim.
MOSFiATA TD1705 specs explained
MOSFiATA 5Cr15MoV, 56+ HRC
Rust resistant and easy to re-sharpen; MOSFiATA calls it Japanese.
MOSFiATA 13-15 degree edge
A fine edge that the 8-inch rod can keep aligned.
TD1705 cast one-piece handles
Blade and handle in one piece; no seams for food to collect.
TD1705 8-inch carver
Long strokes for roasts and turkey.
TD1705 painted wood block
14.6 x 5.9 x 11 inches on the counter.
MOSFiATA TD1705 build
MOSFiATA casts each handle in one piece with the blade, in a pattern it says was inspired by armor, shaped for three grip styles. The blades are hand polished and tempered 5Cr15MoV; 5Cr15MoV is a grade usually made in China, whatever the Japanese label. The block is wood with a spray-painted finish. MOSFiATA lists the TD1705 block size but leaves out its weight.
Using the MOSFiATA TD1705
Use the 8-inch chef and 7-inch santoku for daily chopping, the carving knife for roasts and poultry, the bread knife for loaves and the utility and paring knives for small work. Six 5-inch steak knives serve the table. Hone on the 8-inch rod; the finger guard helps when slicing small items.
MOSFiATA TD1705 caveats
Steel handles can feel slippery when wet or oily and cold in the hand. A dishwasher is allowed, but detergent and rattling dull edges faster than hand washing. 56+ HRC is middle of the road, so expect to hone often.
Check before you buy
- Dry TD1705 steel handles before cutting
- Hone MOSFiATA edges on the 8-inch rod
- Hand wash TD1705 knives when time allows
- Pick silver or gold MOSFiATA to suit the kitchen
The product at a glance
MOSFiATA 17-Piece Stainless Steel Knife Block Set
Best for: Busy families who use the dishwasher
- Piece Count
- 17
- Blade Material
- 5CR15MOV Japanese stainless steel
- Storage Type
- Wood block
- Edge Angle
- 13~15° per side
- Blade Hardness
- 56+ HRC
- Handle Material
- Stainless steel
View on Amazon: MOSFiATA 17-Piece Stainless Steel Knife Block Set Affiliate link
MOSFiATA TD1705 17-pc (silver): 8" chef, 7" santoku, 8" bread, 8" carving, 5" utility, 3.5" paring, six 5" steak knives, 8" rod, 4" scissors, finger guard, wipe, painted wood block; 5Cr15MoV 56+ HRC, 13-15° edge; one-piece cast handles; dishwasher safe.
Pros
- One-piece MOSFiATA handles
- Carving and six steak knives
- Dishwasher safe per MOSFiATA
Cons
- Steel handles slip when wet
- Only 56+ HRC
Good fit if
- You want an easy-care all-steel set
- You roast and carve often
Skip if
- You prefer wood or resin handles
- You want forged MOSFiATA blades
Verdict: All-steel 17-piece block with carving and steak knives.
Specifications side by side
| Spec | MOSFiATA 17-Piece Stainless Steel Knife Block Set |
|---|---|
| Piece Count | 17 |
| Blade Material | 5CR15MOV Japanese stainless steel |
| Storage Type | Wood block |
| Edge Angle | 13~15° per side |
| Blade Hardness | 56+ HRC |
| Handle Material | Stainless steel |
| Sharpener Type | Sharpening rod |
| Features | Dishwasher Safe |
| Color | Silver |
| Style | Japanese |
| Dimensions | 14.6 × 5.9 × 11 inches |
| Size | 17 Piece |
| Model | TD1705 |
Frequently asked questions
What is in the MOSFiATA TD1705 17-piece set?
8" chef, 7" santoku, six 5" steak knives, 8" bread, 8" carving, 5" utility, 3.5" paring, 8" rod, 4" scissors, finger guard, wipe and block.
Are MOSFiATA TD1705 knives dishwasher safe?
Yes, MOSFiATA says the TD1705 set is dishwasher safe.
What steel does the MOSFiATA TD1705 use?
5Cr15MoV with 0.5-0.55% carbon and 56+ HRC.
Are TD1705 handles one piece with the blade?
Yes, MOSFiATA casts each handle in one piece.
Is there a gold MOSFiATA TD1705?
Yes, MOSFiATA sells the TD1705 with a gold titanium-plated finish too.
Featured in
See also
- shoplease 3 piece 4 inch ceramic knife set review
- carote 14 piece cream knife block set review
- carote a10077 12 piece coated knife set review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- vocvoi stainless steel pans review
- kaycrown best utensils stainless steel review
