Piklohas 17-Piece Knife Set with Magnetic Holder Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Piklohas 17-piece set (ASW20230717001) stores its knives on a double-sided magnetic holder made of FSC-certified wood, which Piklohas says holds up to 21 tools. The blades are German X50CrMoV15, quenched and cold-nitrogen treated to 58 HRC and hand-polished to 15 degrees per side, with full tangs, forged bolsters and triple-riveted handles. The "Damascus" in the title is a pattern on the blade, not layered steel. What the listing never does is name the 17 pieces, so you cannot confirm a bread knife, santoku or steak knives before buying. Choose the Piklohas 17-piece if you want a named German steel, 15-degree edges and magnetic upright storage; choose the Piklohas 15-piece block with a detachable steak-knife holder if you want a conventional block. This review comes from the Piklohas listing and its stated specs, not hands-on testing.
What stands out
- Piklohas X50CrMoV15 at 58 HRC
- 15-degree per-side Piklohas edges
- Double-sided magnetic holder, room for 21 tools
- Full tang, forged bolster, three rivets
- Piklohas 17 pieces are not itemized
Who it fits
Good fit for
Buy the Piklohas 17-piece if you want German X50CrMoV15 knives with forged bolsters and a stated 15-degree edge, stored upright on a magnetic holder.
Who should skip it
Skip the Piklohas 17-piece if you need to know the exact knives before buying, or want real layered Damascus steel.
Verdict: Named German steel and a magnetic holder, but an unlisted 17-piece lineup.
Piklohas 17-piece specs explained
Piklohas X50CrMoV15 steel
A common German stainless grade; easy to sharpen.
Piklohas 58 HRC
A typical hardness for German-style knives: tough and easy to hone.
15 degrees per side on the Piklohas blades
Thinner than many German-style edges, so it cuts more cleanly.
Double-sided Piklohas magnetic holder
Knives stand upright on both faces; up to 21 tools fit.
Piklohas Damascus pattern
A surface pattern on X50CrMoV15, not layered Damascus.
Piklohas 17-piece build
Each Piklohas knife has a satin-finished blade, a full tang and a forged bolster, with a triple-riveted handle. The holder is FSC-certified wood with magnets on both sides. The listing gives 14.5 pounds and a 14.6 x 12.2 x 5.9-inch footprint, likely for the boxed set.
Using the Piklohas 17-piece
Hang each knife spine-up on either face of the holder after drying. Hone the 15-degree edges with a ceramic rod and resharpen at the same angle; a wider pull-through sharpener will change it. Because the lineup is not itemized, check the pieces on arrival against what you need.
Piklohas 17-piece caveats
The knives are not listed. Damascus is a pattern only. No dishwasher statement. Magnetic storage leaves the edges exposed, so place the holder away from small children.
Check before you buy
- Unlisted Piklohas lineup is acceptable
- A magnetic Piklohas holder suits your counter
- You will keep a 15-degree angle
- You do not need layered Damascus
The product at a glance
Piklohas 17-Piece Knife Set with Magnetic Block
Best for: Upright magnetic storage
- Piece Count
- 17
- Blade Material
- German X50CrMoV15 high carbon steel
- Construction
- Full tang, forged bolster
- Storage Type
- Magnetic wood holder
- Edge Angle
- 15° per side
- Blade Hardness
- 58 HRC
View on Amazon: Piklohas 17-Piece Knife Set with Magnetic Block Affiliate link
Piklohas 17-piece (ASW20230717001): German X50CrMoV15 at 58 HRC, 15-degree hand-polished edges, full tang, forged bolsters, triple-riveted handles, Damascus-style pattern, double-sided FSC wood magnetic holder (up to 21 tools). Knives not itemized.
Pros
- Named X50CrMoV15 in the Piklohas set
- 15-degree Piklohas edges
- Piklohas holder stores knives upright
Cons
- Piklohas 17 pieces never itemized
- Piklohas pattern is not real Damascus
Good fit if
- You want a magnetic Piklohas holder
- You want forged bolsters at a mid price
Skip if
- You must confirm the Piklohas knives first
- You want layered Damascus steel
Verdict: German-steel knives on a magnetic holder, lineup unlisted.
Specifications side by side
| Spec | Piklohas 17-Piece Knife Set with Magnetic Block |
|---|---|
| Piece Count | 17 |
| Blade Material | German X50CrMoV15 high carbon steel |
| Construction | Full tang, forged bolster |
| Storage Type | Magnetic wood holder |
| Edge Angle | 15° per side |
| Blade Hardness | 58 HRC |
| Style | German |
| Dimensions | 14.6 × 12.2 × 5.9 inches |
| Weight | 14.5 pounds |
| Size | Normal |
| Color | Black-17 Piece |
| Model | ASW20230717001 |
Frequently asked questions
What steel does the Piklohas 17-piece use?
German X50CrMoV15 at 58 HRC, per Piklohas.
Is the Piklohas 17-piece real Damascus?
No. It is X50CrMoV15 with a Damascus-style pattern on the surface.
Which knives are in the Piklohas 17-piece set?
The listing does not itemize the 17 pieces.
How many knives fit the Piklohas magnetic holder?
Piklohas says up to 21 tools across both sides.
Piklohas 17-piece or Piklohas 15-piece block?
17-piece for magnetic upright storage; the 15-piece for a conventional block with a detachable steak-knife holder.
