ROCOCO UNKnife13 Black Hand-Forged Meat Bone Cleaver Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ROCOCO UNKnife13 is a black, hand-forged bone cleaver shaped like a small axe. It is made of 1095 high-carbon steel with a 5 mm thick blade, a 25-degree V edge, a curved arc profile and a retro hammered face, and the handle is integrated with the blade as one full tang without welding. It weighs 1.25 pounds, has a hanging hole and comes with an Oxford cloth cover. The thick 1095 blade and 25-degree edge are built for chopping ribs, poultry and frozen food, so this is a pick for heavy bone work in the kitchen and at camp. Choose the black UNKnife13 if you want a forged carbon-steel bone axe with a cover; choose the TJ POP TC16081 7.2-inch bone cleaver if you want a longer, stainless blade that needs less rust care. 1095 rusts if left wet. This review comes from ROCOCO's listing and published specs; we did not test it.
What stands out
- Hand-forged bone cleaver, model UNKnife13 (black)
- 1095 high-carbon steel, 5 mm blade
- 25-degree V edge, curved arc profile
- Integrated full tang, wood handle
- 1.25 lb, Oxford cloth cover, hanging hole
Who it fits
Good fit for
Buy it if you chop ribs, poultry and frozen meat and want a heavy, forged carbon-steel cleaver for kitchen and camp.
Who should skip it
Skip it if you want a stainless cleaver, a slicing knife, or a blade you can leave wet.
Verdict: A forged 1095 bone axe for heavy chopping.
ROCOCO UNKnife13 specs explained
1095 high-carbon steel in the UNKnife13
A tough carbon steel that sharpens easily but rusts if not dried.
5 mm ROCOCO blade
Thick stock that will not flex or chip on bones.
25-degree V edge on the black ROCOCO
A sturdy angle for chopping rather than slicing.
Curved arc UNKnife13 profile
ROCOCO says the arc shortens the force distance for ribs and big bones.
Integrated ROCOCO full tang
Handle and blade are joined without welding, so the handle should not break off.
ROCOCO bone cleaver build
ROCOCO describes hand forging, quenching and sharpening by blacksmiths, a hammered retro finish to cut sticking, and wood handle scales on an integrated full tang. The size field gives 5.3 inches, likely the blade height or length; the listing does not say which.
Chopping with the ROCOCO UNKnife13
Split pork ribs, chicken backs and turkey joints, break down lamb bones and chop through frozen meat with full swings. ROCOCO also lists cutting wood, which suits camp use. Clean and dry the 1095 blade after every use and oil it before storing.
Before you buy the ROCOCO black cleaver
A 25-degree edge is not a slicer: pair it with a chef knife. The cover is Oxford cloth, not leather. A silver version, UNKnife13S, is also sold.
Check before you buy
- You chop bones or frozen meat
- Wiping and oiling 1095 after use is fine
- A cleaver for camp appeals to you
- You own a separate slicing knife
The product at a glance
ROCOCO 5.3" Hand-Forged Cleaver
Best for: Ribs, bones and frozen meat
- Blade Length
- 5.3"
- Knife Type
- Cleaver
- Blade Material
- 1095 high carbon steel
- Construction
- Hand-forged
- Edge Type
- V-shaped
- Edge Angle
- 25°
View on Amazon: ROCOCO 5.3" Hand-Forged Cleaver Affiliate link
ROCOCO UNKnife13 black bone cleaver: hand-forged 1095 high-carbon steel, 5 mm blade, 25-degree V edge, curved arc, hammered finish, integrated full tang with wood handle, hanging hole, 1.25 lb, Oxford cloth cover.
Pros
- Thick 1095 blade for bones
- One-piece full tang
- Cover for camp carry
Cons
- 1095 rusts if not dried
- Not for slicing
Good fit if
- You chop ribs and frozen meat
- You cook at camp
Skip if
- You want stainless steel
- You want a slicer
Verdict: A forged carbon-steel bone axe with a cover.
Specifications side by side
| Spec | ROCOCO 5.3" Hand-Forged Cleaver |
|---|---|
| Blade Length | 5.3" |
| Knife Type | Cleaver |
| Blade Material | 1095 high carbon steel |
| Construction | Hand-forged |
| Edge Type | V-shaped |
| Edge Angle | 25° |
| Handle Material | Wood |
| Storage Type | Sheath |
| Color | Black |
| Recommended Use | Meat |
| Weight | 1.25 pounds |
| Size | 5.3" |
| Model | UNKnife13 |
Frequently asked questions
What steel is the ROCOCO bone cleaver?
1095 high-carbon steel, hand-forged.
How thick is the ROCOCO UNKnife13 blade?
5 mm.
What is the UNKnife13 edge angle?
A 25-degree V edge.
Does the ROCOCO cleaver come with a cover?
Yes, an Oxford cloth cover.
How heavy is the ROCOCO UNKnife13?
1.25 pounds.
