SANMEIHO 7-Inch Flexible Fillet Knife Review: 10Cr15MoV, Pakkawood Handle
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The SANMEIHO SMHCS-2025-06-5 is a 7-inch flexible fillet knife with a slender, tapered blade made from five laminated layers around 10Cr15MoV (sold as "Japanese G5") at 62 HRC, hand sharpened to 12 degrees, with a frosted matte finish and a Pakkawood handle. The thin flexible blade bends along a fish's backbone and slides under skin, and it also trims boneless meat. Choose the SMHCS-2025-06-5 if you fillet fish and want a budget knife with a fine edge and a stable handle; choose a stiff boning knife such as the Columbia Cutlery 6-inch curved stiff boner if you mainly bone pork and poultry, where a rigid blade pushes through joints. Two caveats: 10Cr15MoV is usually a Chinese grade, and 62 HRC is very hard for a blade sold as flexible, so treat both claims with care. We drew on SANMEIHO's listing and published specs; nobody here tested the knife.
What stands out
- Flexible 7-inch SANMEIHO fillet blade
- 12-degree SMHCS-2025-06-5 edge
- Five-layer laminated SANMEIHO steel
- Frosted matte SANMEIHO finish
- Non-swelling Pakkawood SANMEIHO handle
Who it fits
Good fit for
Buy the SANMEIHO SMHCS-2025-06-5 if you fillet fish at home and want an inexpensive flexible knife with a very fine edge and a Pakkawood handle.
Who should skip it
Skip the SANMEIHO fillet knife if you mostly bone pork or beef (pick a stiff boner), want a sheath for fishing trips, or distrust a hardness claim this high on a flexible blade.
Verdict: A budget flexible fillet knife with a fine edge; check the hardness claim.
SANMEIHO SMHCS-2025-06-5 specs explained
SMHCS-2025-06-5 blade: 7 in, slender, flexible
Bends along the backbone and under the skin of fish.
SMHCS-2025-06-5 steel: 5-layer 10Cr15MoV
Laminated stainless; SANMEIHO calls it Japanese G5.
SMHCS-2025-06-5 hardness: 62 HRC
High for a flexible knife; fine edges at this hardness can chip on bone.
SMHCS-2025-06-5 edge: 12 degrees
A very acute angle for thin, clean fillets.
SMHCS-2025-06-5 handle: Pakkawood, 5.12 oz knife
Dense resin-wood that does not swell or crack.
SANMEIHO fillet knife build
SANMEIHO forges five laminated layers, frosts the surface to a matte finish and treats it to resist cold, heat and moisture, then fits a Pakkawood handle. The 12.2-inch overall length and 5.12 oz weight fit a 7-inch fillet knife. Tang type, sheath and warranty are not listed.
Using the SANMEIHO fillet knife
Run the tapered tip along the backbone of trout, bass or salmon, then flex the blade flat to lift the fillet and slide under the skin. It also trims silver skin and fat from boneless meat. SANMEIHO mentions bones, but a 12-degree edge at 62 HRC should glide along bones, not cut through them. Hand wash and dry it, especially after salt water.
Before buying the SANMEIHO SMHCS-2025-06-5
No sheath, tang type or warranty is listed. The title calls it a boning knife for meat as well; it suits fish first and light meat trimming second. Hardness and flexibility claims are the brand's own.
Check before you buy
- You fillet fish with the SANMEIHO SMHCS-2025-06-5
- You want a Pakkawood SANMEIHO handle
- You will keep the 12-degree SANMEIHO edge off bones
- You can store the SANMEIHO fillet knife without a sheath
The product at a glance
SANMEIHO 7 Inch Fillet Knife
Best for: Fish filleting
- Blade Length
- 7 in
- Knife Type
- Fillet
- Blade Material
- 10Cr15Mov stainless steel
- Construction
- Forged
- Edge Angle
- 12°
- Blade Hardness
- 62 HRC
View on Amazon: SANMEIHO 7 Inch Fillet Knife Affiliate link
SANMEIHO SMHCS-2025-06-5 7" flexible fillet knife: 5-layer laminated 10Cr15MoV ("Japanese G5") at 62 HRC, 12° edge, frosted matte finish, Pakkawood handle, 5.12 oz, 12.2" overall.
Pros
- Fine 12-degree SANMEIHO edge
- Flexible SMHCS-2025-06-5 blade for fish
- Budget SANMEIHO price with Pakkawood
Cons
- 62 HRC is unusual on a flexible SANMEIHO blade
- No SANMEIHO sheath or warranty listed
Good fit if
- You fillet your own fish with a SANMEIHO knife
- You want a light flexible fillet blade
Skip if
- You bone pork and beef (choose a stiff boner)
- You need a sheath for the tackle box
Verdict: A budget flexible fillet knife with a very fine edge.
Specifications side by side
| Spec | SANMEIHO 7 Inch Fillet Knife |
|---|---|
| Blade Length | 7 in |
| Knife Type | Fillet |
| Blade Material | 10Cr15Mov stainless steel |
| Construction | Forged |
| Edge Angle | 12° |
| Blade Hardness | 62 HRC |
| Handle Material | Pakkawood |
| Blade Flexibility | Flexible |
| Style | Japanese |
| Recommended Use | Boning, Meat |
| Dimensions | 12.2 × 1.38 × 0.9 inches |
| Weight | 5.12 ounces |
| Size | 7" |
| Color | 7 Inch Fillet Knife |
| Model | SMHCS-2025-06-5 |
Frequently asked questions
Is the SANMEIHO SMHCS-2025-06-5 flexible?
Yes, SANMEIHO describes a slender, relatively soft blade that bends with the fish.
What steel is the SANMEIHO fillet knife?
Five laminated layers with 10Cr15MoV, listed at 62 HRC; usually a Chinese grade.
What edge angle does the SMHCS-2025-06-5 have?
SANMEIHO hand sharpens it to 12 degrees.
Can the SANMEIHO fillet knife bone meat?
For trimming and light boning yes; for pork and beef joints a stiff boner works better.
Does the SANMEIHO SMHCS-2025-06-5 come with a sheath?
SANMEIHO does not list a sheath for this fillet knife.
Featured in
See also
- monteherra adjustable bread bow thickness guides review
- victorinox swiss classic 15 piece knife block set review
- mercer millennia m4vic9 7 piece knife roll review
- sanmeiho 10 inch sushi knife review
- sanmeiho chef knife 8 inch review
- SANMEIHO 16-Piece Knife Block Set Review (2026): A Spec-Based Look
- SANMEIHO 8-Inch Serrated Bread Knife Review: Specs, Pros and Cons
- SANMEIHO 10-Inch Serrated Bread and Sourdough Knife Review: Wood Handle
- bovugac iflytek 7 inch review
- elecrow 7 inch touchscreen monitor review
