As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Shun Sora 7-Inch Hollow Ground Santoku Review (VB0718)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Shun Sora VB0718 is a 7-inch hollow ground santoku and one of the cheapest ways into Shun's handmade Japanese knives. Shun keeps the price down with its Composite Blade idea: only the cutting edge is San Mai VG10, joined to a 420J stainless upper, so you get a hard VG10 edge without paying for a full Damascus blade. The edge is ground to 16 degrees, the hollow scallops along the side help release food, and the full-tang handle is a textured PP/TPE polymer rather than wood. Choose the VB0718 if you want a Shun santoku you can stop babying; choose a Shun Classic santoku if you want a VG-MAX blade with a Pakkawood handle and can pay more. This review is built from the listing and Shun's published specs, not from hands-on use.

What stands out

  • Sora VB0718 VG10 edge on a 420J stainless upper
  • 16-degree edge with hollow ground scallops
  • Full-tang textured PP/TPE handle on the VB0718
  • Entry price for a handmade Shun santoku

Who it fits

Good fit for

Buy the Sora VB0718 if you want a sharp Japanese santoku for vegetables, boneless proteins and fruit, with a grippy handle that shrugs off wet hands.

Who should skip it

Skip the VB0718 if you want a wood handle, a fully clad Damascus blade, or a longer blade for big roasts and melons.

Verdict: A sensible first Shun: a VG10 edge where it matters and a practical handle.

Sora VB0718 specs explained

San Mai VG10 edge, 420J upper

The hard VG10 steel only forms the cutting edge; the softer 420J upper keeps cost down.

7-inch santoku blade

A flat-edged, sheep's-foot shape for push cuts and chopping rather than rocking.

Hollow ground indentations on the VB0718

Shallow scallops break suction so potato and cucumber slices fall away.

PP/TPE polymer handle, full tang

Textured synthetic grip for left or right hand; no wood to oil or crack.

How the Sora VB0718 is put together

Shun calls the Sora build its patented Composite Blade technology: a San Mai VG10 cutting edge is joined to a 420J stainless blade upper, and the joint line gives the blade its wavy two-tone look. The full tang runs into a textured PP/TPE polymer handle, so there is no Pakkawood to care for. The listing gives an overall length of 13 inches and a blade height of about 2 inches, and Shun says each knife is handcrafted in Japan with free sharpening and honing.

What the VB0718 santoku does well

A santoku shines on vegetables: thin-slicing onions, dicing carrots, chopping herbs and cutting boneless chicken or fish into even pieces with straight up-and-down or forward push cuts. The hollow ground scallops help with sticky foods like potatoes. The flat profile does not rock well, so if you mince by rocking a curved belly, a chef's knife suits you better. Keep the thin VG10 edge off bones, frozen food and glass boards.

Before you buy the Sora VB0718

The Sora is a value line, so the blade is not clad in Damascus layers like Shun Classic or Premier. VG10 at 16 degrees is hard and thin: it holds an edge well but can chip if you twist it in squash or hit bone. Shun lists hand washing for its knives, and the polymer handle makes drying quick.

Check before you buy

  • You want the cheapest route to a handmade Shun santoku (VB0718)
  • You prefer the Sora VB0718 polymer grip over wood
  • You cut vegetables with push cuts, not rocking
  • You will keep the VB0718 off bones and frozen food

The product at a glance

Shun Sora 7-Inch Hollow Ground Santoku Knife

Best for: Vegetable prep on a budget

Blade Length
7"
Knife Type
Santoku Knife
Blade Material
VG10, 420J stainless steel
Construction
San Mai
Edge Type
Hollow ground
Edge Angle
16-degree

View on Amazon: Shun Sora 7-Inch Hollow Ground Santoku Knife Affiliate link

Shun Sora VB0718: 7-inch hollow ground santoku, San Mai VG10 edge on a 420J upper, 16-degree edge, full-tang PP/TPE polymer handle.

Pros

  • VG10 edge at the Sora VB0718 entry price
  • Hollow ground scallops for sticky slices
  • Low-care polymer VB0718 handle

Cons

  • Only the VB0718 edge is VG10, not the whole blade
  • Flat santoku profile is poor for rocking cuts

Good fit if

  • You want an affordable handmade Shun
  • You mostly chop vegetables

Skip if

  • You want a wood handle or Damascus cladding
  • You rock-chop herbs with a curved belly

Verdict: The practical Shun santoku for everyday vegetable prep.

Specifications side by side

Spec Shun Sora 7-Inch Hollow Ground Santoku Knife
Blade Length 7"
Knife Type Santoku Knife
Blade Material VG10, 420J stainless steel
Construction San Mai
Edge Type Hollow ground
Edge Angle 16-degree
Handle Material PP/TPE polymer blend
Style Japanese
Dimensions 13 × 0.81 × 2 inches
Weight 6.24 ounces
Size 7"
Color Metallic
Model VB0718

Frequently asked questions

What steel is the Shun Sora VB0718 santoku?

Its cutting edge is San Mai VG10 steel, joined to a 420J stainless upper using Shun's Composite Blade method.

Why are there scallops on the Sora VB0718 blade?

They are hollow ground indentations that cut friction and help food slide off the blade.

What is the Sora VB0718 handle made of?

A textured PP/TPE polymer blend over a full tang, made for both left- and right-handed cooks.

How long is the Shun Sora santoku overall?

The listing gives 13 inches overall for the 7-inch VB0718.

Is the Sora as good as Shun Classic?

The Sora edge steel is VG10 and only the edge is hard steel; Shun Classic uses VG-MAX with full Damascus cladding and Pakkawood, at a higher price.

See also