As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

TJ POP SEGA TC16081 7.2-Inch Heavy Duty Bone Cleaver Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The TJ POP TC16081 from the SEGA series is a true bone cleaver: a hand-forged, hammered 7.2-inch blade in 50Cr15MoV stainless steel, 3.5mm thick, with a 25-30 degree V edge made for chopping through ribs, chicken backs and joints. The handle is Pakkawood on a full tang, the blade is 3.8 inches tall and the whole knife weighs 1.15 lb. Choose the TC16081 if you break down chickens, chop pork ribs or split bones for stock and want a low-priced, heavy blade; choose TJ POP's thinner SEGA TC17068 Chinese chef cleaver if you mostly slice vegetables and boneless meat. We wrote this from TJ POP's TC16081 listing and published specs; the cleaver was not tested by us.

What stands out

  • Hand-forged 50Cr15MoV TC16081 blade
  • 3.5mm thick, 3.8 in tall TJ POP blade
  • 25-30 degree V edge for bones
  • Full-tang Pakkawood TC16081 handle
  • 1.15 lb listed for the TC16081

Who it fits

Good fit for

Buy the TJ POP TC16081 if you chop bones at home, such as chicken backs, pork ribs and oxtail, and want a heavy, inexpensive cleaver.

Who should skip it

Skip the TJ POP TC16081 if you want a thin cleaver for slicing vegetables, a named hardness, or a cleaver over 8 inches for big cuts.

Verdict: A heavy, low-cost bone cleaver with a 3.5mm blade and obtuse edge.

TJ POP TC16081 specs explained

TC16081 blade 7.2 x 3.8 in

Tall enough to scoop, short enough for home boards.

TJ POP blade 3.5mm thick

Thick spine gives the weight that drives through bone.

50Cr15MoV in the TC16081

A common Chinese stainless grade; TJ POP gives no HRC.

TC16081 V edge 25-30 degrees

Obtuse enough to survive bone impacts without chipping.

TJ POP TC16081 weight 1.15 lb

Heavy: let the weight do the chopping.

TJ POP TC16081 build

TJ POP forges and heat-treats the 50Cr15MoV blade several times and leaves a hammered texture that reduces sticking. The edge is a 25-30 degree V grind. The Pakkawood handle sits on a full tang, joined to the blade with no gaps, which TJ POP says prevents loosening and absorbs shock. The overall length is 11.6 inches.

Chopping with the TJ POP bone cleaver

Use straight, firm chops through chicken backs, wings, pork ribs and fish heads, keeping your free hand well clear. The weight does the work, so lift and drop rather than force. It is too thick for thin vegetable slices; a chef knife or thin Chinese cleaver handles those. Wash by hand, dry the Pakkawood and touch up the obtuse edge on a coarse stone.

TJ POP TC16081 caveats

No HRC figure. The listing calls it ultra sharp, but a 25-30 degree edge is meant for bone, not fine slicing. The 1.15 lb weight may include packaging. No dishwasher guidance.

Check before you buy

  • Use a thick wood or plastic board under the TC16081
  • Chop straight down with the TJ POP, never twist
  • Hand wash and dry the TC16081 Pakkawood
  • Keep a thin knife for vegetables beside the TC16081

The product at a glance

TJ POP 7.2-Inch Full Tang Bone Cleaver

Best for: Chopping bones

Blade Length
7.2 in
Knife Type
Bone Cleaver
Blade Material
50Cr15MoV stainless steel
Construction
Hand-Forged
Edge Type
V-shaped
Edge Angle
25-30°

View on Amazon: TJ POP 7.2-Inch Full Tang Bone Cleaver Affiliate link

TJ POP TC16081: 7.2" hand-forged bone cleaver, 50Cr15MoV stainless, 3.5mm thick, 3.8" tall, 25-30 degree V edge, full-tang Pakkawood handle, 1.15 lb.

Pros

  • Thick 3.5mm TJ POP blade for bones
  • Obtuse TC16081 edge resists chipping
  • Low TJ POP price

Cons

  • TJ POP gives no HRC
  • TC16081 too thick for fine slicing

Good fit if

  • You chop chicken and pork bones with a TJ POP
  • You want a cheap TC16081 bone cleaver

Skip if

  • You want a thin slicing cleaver, not the TC16081
  • You need a 9-inch blade instead of TJ POP's 7.2

Verdict: A heavy, budget bone cleaver for home kitchens.

Specifications side by side

Spec TJ POP 7.2-Inch Full Tang Bone Cleaver
Blade Length 7.2 in
Knife Type Bone Cleaver
Blade Material 50Cr15MoV stainless steel
Construction Hand-Forged
Edge Type V-shaped
Edge Angle 25-30°
Handle Material Pakkawood
Recommended Use Meat
Dimensions 11.6 × 3.8 × 0.9 inches
Weight 1.15 pounds
Size 7.2"
Color TC16081 - Forged Pattern
Model TC16081

Frequently asked questions

Can the TJ POP TC16081 chop bones?

Yes. TJ POP built it for bones, with a 3.5mm blade and a 25-30 degree V edge.

What steel is the TJ POP TC16081?

50Cr15MoV stainless steel, hand-forged; no HRC is listed.

How heavy is the TJ POP TC16081?

1.15 lb, per the listing.

TJ POP TC16081 or SEGA TC17068?

The TC16081 for bones; the TC17068 Chinese chef cleaver for vegetables and boneless meat.

Is the TJ POP TC16081 full tang?

Yes, with a Pakkawood handle joined seamlessly to the blade.

See also