Victorinox Fibrox 6-Inch Curved Flexible Boning Knife (5.6613.15) Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Victorinox Fibrox 5.6613.15 is a 6-inch boning and fillet knife with a curved, flexible stainless blade, meant for thinner, more delicate cuts such as chicken and fish where the blade has to bend around bones and under skin. The textured Fibrox handle is slip resistant and NSF approved, it is made in Switzerland, and Victorinox covers it for life against defects. It is our pick for home cooks who break down chickens and fillet fish and want a professional-kitchen knife at a modest price. Choose the flexible 5.6613.15 if you work mostly on poultry and fish; choose the Fibrox 6-inch curved semi-stiff boner if you trim pork shoulder, brisket or other firmer meat where flex gets in the way. We worked from the 5.6613.15 listing and Victorinox's published specs; nothing was tested by hand.
What stands out
- Flexible 6-inch curved 5.6613.15 blade
- Bends along bones on chicken and fish
- Textured, slip-resistant Fibrox handle, NSF approved
- 5.6613.15: Swiss made, lifetime defect cover
- 3.2 oz weight field
Who it fits
Good fit for
Buy the Fibrox 5.6613.15 if you bone chicken thighs, debone whole birds or fillet fish at home and want a grippy, washable handle that stays secure with wet hands.
Who should skip it
Skip the flexible 5.6613.15 if you mostly trim big, firm cuts like pork shoulder or brisket (a semi-stiff or stiff boner is easier there) or if you want a wooden or forged handle.
Verdict: A flexible 6-inch Fibrox boner aimed at poultry and fish.
Victorinox Fibrox 5.6613.15 specs explained
5.6613.15 blade: 6 in, curved
The curve lifts the tip for cuts along a rib cage or under skin.
5.6613.15 flex: flexible
Bends around joints and along fish bones; less control on firm meat.
Fibrox Pro handle on the 5.6613.15
Textured synthetic, slip resistant and NSF approved.
Fibrox 6-inch flexible weight field: 3.2 oz
A light 5.6613.15 for long poultry and fish sessions.
5.6613.15 warranty
Lifetime against defects in material and workmanship.
Fibrox 5.6613.15 build
The blade is stamped stainless steel, curved toward the tip and ground thin enough to flex. The Fibrox handle is a textured thermoplastic that Victorinox designs for balance and grip, and it carries NSF approval for commercial kitchens. The listing does not give the steel grade, hardness or edge angle, and the length field (11.2 inches) is the overall knife.
Using the flexible Fibrox 6-inch boner
Victorinox pitches the 5.6613.15 at removing meat and fish from the bone, especially tender, intricate cuts. The flex lets the blade ride along a chicken's backbone or a fish's ribs without digging in, and the curve helps when you lift skin or silverskin. On a dense pork shoulder the same flex can wander, which is where the semi-stiff version fits. Victorinox sells its sharpeners separately.
Before buying the Victorinox 5.6613.15
Decide on flex first: flexible for poultry and fish, semi-stiff or stiff for larger cuts of red meat. A 5-inch flexible Fibrox (5.6613.12) exists for smaller birds and fish. The listing gives no HRC or steel grade.
Check before you buy
- Most of your boning is chicken and fish
- You want the flexible 5.6613.15, not semi-stiff
- A Fibrox synthetic handle suits you
- 6 inches is long enough for your fish
The product at a glance
Victorinox Fibrox 6-Inch Curved Flexible Boning Knife
Best for: Poultry and fish boning
- Blade Length
- 6-In
- Knife Type
- Boning & Fillet Knife
- Blade Material
- Stainless steel
- Handle Material
- Fibrox
- Blade Flexibility
- Flexible
- Blade Profile
- Curved
View on Amazon: Victorinox Fibrox 6-Inch Curved Flexible Boning Knife Affiliate link
Victorinox Fibrox 5.6613.15: 6" curved flexible stainless boning/fillet knife, textured slip-resistant Fibrox handle (NSF approved), 3.2 oz, Swiss made, lifetime warranty against defects.
Pros
- Flexible 5.6613.15 blade follows poultry and fish bones
- Grippy NSF Fibrox handle on the 5.6613.15
- Swiss-made Fibrox with lifetime warranty
Cons
- 5.6613.15 listing gives no steel grade or HRC
- Flexible 5.6613.15 wanders on firm red meat
Good fit if
- You bone chicken and fillet fish with a Fibrox
- You want a wet-grip handle
Skip if
- You trim brisket and pork more than fish
- You want a wooden handle
Verdict: A flexible 6-inch Fibrox boner for poultry and fish.
Specifications side by side
| Spec | Victorinox Fibrox 6-Inch Curved Flexible Boning Knife |
|---|---|
| Blade Length | 6-In |
| Knife Type | Boning & Fillet Knife |
| Blade Material | Stainless steel |
| Handle Material | Fibrox |
| Blade Flexibility | Flexible |
| Blade Profile | Curved |
| Color | Black |
| Recommended Use | Boning, Meat |
| Dimensions | 11.2 × 1.77 × 0.2 inches |
| Weight | 3.2 ounces |
| Size | 6" |
| Model | 5.6613.15-X1 |
Frequently asked questions
Is the Victorinox Fibrox 5.6613.15 flexible or stiff?
Flexible, with a curved 6-inch blade.
Can the 5.6613.15 fillet fish?
Yes. Victorinox sells it as a boning and fillet knife, and the flexible blade suits fish and chicken.
What is the 5.6613.15 handle made of?
Victorinox's textured Fibrox synthetic, slip resistant and NSF approved.
Where is the Fibrox 5.6613.15 made?
Switzerland, with a lifetime warranty against defects in material and workmanship.
Fibrox 5.6613.15 flexible or the 6-inch semi-stiff Fibrox boner?
The flexible 5.6613.15 for poultry and fish; the semi-stiff for firmer cuts like pork and beef.
