Victorinox Rosewood 6-Inch Stiff Boning Knife Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Victorinox Rosewood 47013 is a 6-inch boning knife with a straight, stiff stainless steel blade and a triple-riveted rosewood handle. Victorinox aims it at thick cuts: beef and pork, where a rigid blade follows large bones and cuts through tendons and fat without bending. That is the key choice with boning knives: stiff for big red-meat cuts, flexible for poultry and fish. The pointed tip pierces meat to start a cut, and the listing gives a 3.2-ounce weight. Pick it if you break down pork shoulders or trim briskets and like a wood handle; pick a flexible curved Victorinox boner if you mostly debone chicken or fillet fish. We wrote this from the listing and Victorinox's published details, not from hands-on use.
What stands out
- Stiff straight 47013 blade for beef and pork
- Triple-riveted rosewood handle on the 47013
- Pointed tip starts cuts cleanly
- 3.2 oz listed weight
Who it fits
Good fit for
Buy the 47013 if you debone large cuts of beef or pork and prefer a classic wood handle.
Who should skip it
Skip the 47013 for chicken and fish, where a flexible curved blade follows the bones better, or if you want a dishwasher-friendly synthetic handle.
Verdict: A rigid wood-handled boner for thick red-meat cuts.
Rosewood 47013 specs explained
6-inch straight blade
The common boning length; straight spine for long, clean cuts.
Stiff flex
Holds its line along big bones in beef and pork.
Rosewood handle, triple rivets
A traditional wood grip fixed with three rivets.
3.2 oz, 10.9 in overall
Light; easy to angle around joints.
How the 47013 is built
The listing describes a straight-edge stainless blade with a pointed tip, a rosewood handle with triple handle rivets, and a knife that is weighted and balanced. Overall length is 10.9 inches. Victorinox gives a lifetime guarantee against defects; no hardness or steel grade is listed. Wood handles need hand washing and the occasional oiling.
Butchery with a stiff 6-inch boner
Bone out a pork shoulder, trim silverskin from a beef tenderloin, separate a leg of lamb or remove ribs from a rack. The stiff blade pushes through tendons; on a whole chicken it can feel rigid next to a flexible boner. Keep a honing steel nearby, as boning knives meet bone often.
Before you buy the Rosewood 47013
Victorinox sells the same line with semi-stiff and flexible curved blades; make sure stiff and straight is what you need. Rosewood handles should not go in the dishwasher.
Check before you buy
- Most of your 47013 work is beef, pork or lamb
- You want a wood handle and accept hand washing
- A straight stiff blade suits your cuts
- Poultry and fish go to a flexible knife, not the 47013
The product at a glance
Victorinox 6-Inch Rosewood Stiff Boning Knife
Best for: Beef and pork butchery
- Blade Length
- 6"
- Knife Type
- Boning Knife
- Blade Material
- Stainless steel
- Edge Type
- Straight-edge
- Handle Material
- Rosewood
- Blade Flexibility
- Stiff
View on Amazon: Victorinox 6-Inch Rosewood Stiff Boning Knife Affiliate link
Victorinox Rosewood 6-inch boning knife 47013: straight, stiff stainless blade, pointed tip, triple-riveted rosewood handle, 3.2 oz.
Pros
- Stiff 47013 blade suits beef and pork
- Classic triple-riveted rosewood grip
- Pointed tip for starting cuts
Cons
- Hand wash only wood handle
- Rigid for poultry and fish
Good fit if
- You bone out large red-meat cuts
- You like wood handles
Skip if
- You mostly debone chicken
- Your 47013 would go in the dishwasher
Verdict: A stiff, wood-handled boning knife for big cuts.
Specifications side by side
| Spec | Victorinox 6-Inch Rosewood Stiff Boning Knife |
|---|---|
| Blade Length | 6" |
| Knife Type | Boning Knife |
| Blade Material | Stainless steel |
| Edge Type | Straight-edge |
| Handle Material | Rosewood |
| Blade Flexibility | Stiff |
| Recommended Use | Boning |
| Dimensions | 10.9 × 1.13 × 0.75 inches |
| Weight | 3.2 ounces |
| Size | 6" |
| Color | Rosewood |
| Model | 47013 |
Frequently asked questions
Is the Victorinox 47013 stiff or flexible?
Stiff; the listing calls it a straight, stiff blade for thicker meats.
What is the 47013 handle made of?
Rosewood, fixed with triple rivets.
Can the Rosewood boning knife go in the dishwasher?
Hand wash it; wood handles suffer in a dishwasher.
Is a stiff boning knife good for chicken?
It works, but a flexible curved blade follows poultry bones more easily.
How heavy is the 47013?
The listing gives 3.2 ounces and 10.9 inches overall.
Featured in
See also
- victorinox swiss classic 7 inch santoku review
- victorinox 47520 8 inch fibrox chef s knife review
- victorinox forschner 40450 boning knife review
- victorinox 3 25 inch swiss classic review
- victorinox swiss classic 3 25 in review
- Victorinox Wood 5-Inch Semi-Stiff Boning Knife Review: Specs, Pros and Cons
- Victorinox Swiss Classic 8-Inch Chef's Knife Review: Who It Fits and Who Should Skip It
- Victorinox Fibrox 6-Inch Chef's Knife Review (2026): A Spec-Based Look
- jet 6 inch long bed straight review
- allen heath 18 inch LED straight neck review
