Victorinox Wood 6-Inch Curved Semi-Stiff Boning Knife (5.6606.15) Review: Who It Fits
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Victorinox Wood 5.6606.15 is a 6-inch boning knife with an extra-narrow, curved, semi-stiff stainless blade and a maple handle, built for delicate trimming and deboning. Semi-stiff is the middle ground: firm enough to push through silverskin and around pork or beef joints, with a little give for poultry. It is our pick for cooks who want Victorinox's boning blade with a wooden grip instead of the Fibrox synthetic. Choose the 5.6606.15 if you trim a mix of meats and like a wood handle; choose the Victorinox Wood 6-inch flexible boner (5.6616.15) if you mostly bone chicken and fish; choose the Fibrox 6-inch semi-stiff (5.6603.15) if you want the same blade type with a dishwasher-tough, slip-resistant handle. The listing has only three bullets and no weight; this review uses it and Victorinox's published specs, not hands-on testing.
What stands out
- Extra-narrow 6-inch curved 5.6606.15 blade
- Semi-stiff: firm on red meat, some give on poultry
- Maple wood handle
- Wear-resistant stainless steel
- 11.3-inch overall length field
Who it fits
Good fit for
Buy the Victorinox Wood 5.6606.15 if you trim and debone pork, beef, lamb and chicken at home and prefer the feel of a wooden handle.
Who should skip it
Skip the 5.6606.15 if you mainly fillet fish (a flexible blade bends better), want a handle you can leave wet or put in a dishwasher, or want a listing that states weight and steel grade.
Verdict: A semi-stiff, extra-narrow 6-inch Victorinox boner with a maple handle for mixed meat trimming.
Victorinox Wood 5.6606.15 specs
5.6606.15 blade: 6 in (size field 5.9 in)
Curved and extra narrow for close work around bone.
5.6606.15 flex: semi-stiff
Holds its line on red meat; bends slightly on poultry.
Wood 5.6606.15 handle: maple
Natural wood grip; colour field brown.
5.6606.15 steel: wear-resistant stainless
No grade or hardness given in this listing.
Wood 6-inch boner overall length: 11.3 in
No weight is given for the 5.6606.15.
Victorinox Wood 5.6606.15 build
The listing says only three things about the build: a narrow, curved blade, wear-resistant stainless steel and a high-quality wooden handle. The title names the wood as maple. Steel grade, hardness, edge angle and weight are missing. A rosewood-handled 5.6606.15 sold under another listing uses the same blade description, so the handle wood is the main difference between them.
Using the Wood 6-inch semi-stiff boner
Victorinox calls the extra-narrow, semi-stiff, curved blade right for delicate trimming and deboning. In practice that means taking silverskin off a pork tenderloin, separating a leg joint, trimming fat from a steak or lifting meat off a rib. On whole fish the semi-stiff blade will not hug the bones like a flexible one. Treat a wooden handle with care: hand wash, dry promptly and do not soak.
Before buying the Victorinox 5.6606.15
Pick the flex for your meat: semi-stiff for mixed meats, flexible for fish and poultry, stiff for heavy beef work. The maple handle is the reason to choose this over the Fibrox version, which is easier to clean. The listing's 5.9-inch size field matches a 6-inch nominal blade.
Check before you buy
- You trim mixed meats more than fish
- A semi-stiff 5.6606.15 blade suits your work
- You will hand wash and dry a maple handle
- You accept a three-bullet listing with no weight
The product at a glance
Victorinox 6" Curved Boning Knife
Best for: Mixed meat trimming
- Blade Length
- 6"
- Knife Type
- Boning
- Blade Material
- Stainless steel
- Handle Material
- Maple
- Blade Flexibility
- Semi-Stiff
- Blade Profile
- Curved, Narrow
View on Amazon: Victorinox 6" Curved Boning Knife Affiliate link
Victorinox Wood 5.6606.15: 6" (size field 5.9") extra-narrow, curved, semi-stiff stainless boning knife with a maple handle; 11.3" overall; listing gives no weight or steel grade.
Pros
- Extra-narrow curved 5.6606.15 blade for close trimming
- Semi-stiff 5.6606.15 handles mixed meats
- Maple wood grip
Cons
- 5.6606.15 listing is only three bullets
- Maple 5.6606.15 handle needs hand washing
Good fit if
- You trim pork, beef and chicken with one Victorinox boner
- You prefer wood to Fibrox
Skip if
- You fillet fish mostly
- You want a dishwasher-tough handle
Verdict: A semi-stiff Victorinox boner with a maple handle for mixed meats.
Specifications side by side
| Spec | Victorinox 6" Curved Boning Knife |
|---|---|
| Blade Length | 6" |
| Knife Type | Boning |
| Blade Material | Stainless steel |
| Handle Material | Maple |
| Blade Flexibility | Semi-Stiff |
| Blade Profile | Curved, Narrow |
| Color | Brown |
| Recommended Use | Boning, Meat |
| Dimensions | 11.3 × 1.5 × 0.87 inches |
| Size | 5.9" |
| Model | 5.6606.15 |
Frequently asked questions
Is the Victorinox 5.6606.15 flexible?
No, it is semi-stiff: firmer than the flexible 5.6616.15 Wood boner, with slight give.
What wood is the Victorinox 5.6606.15 handle?
Maple, per the listing title; the colour field reads brown.
What is the extra-narrow 5.6606.15 blade good for?
Delicate trimming and deboning, such as silverskin, joints and fat on pork, beef and chicken.
Victorinox Wood 5.6606.15 or Fibrox 5.6603.15?
The Wood 5.6606.15 for a maple grip; the Fibrox 5.6603.15 semi-stiff for a slip-resistant synthetic handle.
Does the 5.6606.15 listing give a steel grade?
No. It says wear-resistant stainless steel and gives no grade or hardness.
