As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

WÜSTHOF Classic Ikon 5-Inch Hollow Edge Santoku Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The WÜSTHOF Classic Ikon 5-inch hollow edge santoku (4172-7) is a small santoku with two features most short knives lack: a 10-degree cutting edge and a row of hollow-ground dimples that let air in between blade and food. WÜSTHOF says the blade is thinner than a traditional chef's knife and curves up only at the very tip, which gives a straighter edge for push cuts. It is forged from a single block of high-carbon stainless steel, tempered to 58 HRC and edged with PEtec, and sits on the Ikon handle with a bolster at each end. At 4.59 ounces it suits quick, precise vegetable work. This summary rests on WÜSTHOF's listing; we did not cut with it.

What stands out

  • 10-degree edge, thin blade
  • Dimples cut sticking
  • 58 HRC with PEtec
  • Ikon handle, two bolsters

Who it fits

Good fit for

Choose the Ikon 5-inch santoku if you want a very sharp, thin small blade for slicing cucumbers, potatoes and cheese thin, and you like the curved Ikon grip.

Who should skip it

Skip it if you chop through hard squash or bone-in meat (a 10-degree edge is fine and thin), or if you need a santoku long enough to be your main knife.

Verdict: A thin, very sharp small santoku with a dimpled blade.

4172-7 specs explained

10-degree edge

A more acute angle than most Western knives: very keen, less tolerant of twisting or hard food.

Hollow edge

Evenly spaced dimples create small air pockets so slices fall off the blade.

58 HRC, PEtec

Classic Ikon temper with WÜSTHOF's edge process.

4.59 ounces

Light and quick for short, precise strokes.

Construction

WÜSTHOF forges the 4172-7 from one block of high-carbon stainless steel and fits the Classic Ikon handle, which carries a bolster at the heel and another at the butt for balance. The listing promises corrosion and dulling resistance and a limited lifetime warranty, and names Germany as the place of manufacture. It does not give care instructions; hand wash it to protect a thin 10-degree edge. The 9-inch length field is the overall knife.

What the 5-inch Ikon santoku is good at

Slice cucumber, radish and potato thin without the slices clinging, cut cheese for a board, dice a shallot, cut sushi rolls and trim mushrooms. Go gently near bones, frozen food and hard rinds: a thin 10-degree edge can roll or chip if forced.

Is a 10-degree edge worth having?

It makes for easy, clean slices on soft and medium food and needs a sharpener or stone set to 10 degrees to keep it that way. If you sharpen with a pull-through set to 15-20 degrees, you will lose that geometry over time.

Check before you buy

  • You slice starchy or wet vegetables thin
  • You can maintain a 10-degree edge
  • A double-bolster Ikon handle suits your grip
  • You have a longer knife for big produce

The product at a glance

Wüsthof Classic Ikon 5" Santoku Knife

Best for: Thin slicing

Blade Length
5"
Knife Type
Santoku
Blade Material
High Carbon Stainless Steel
Construction
Precision Forged
Edge Type
Hollow edge
Edge Angle
10 degree

View on Amazon: Wüsthof Classic Ikon 5" Santoku Knife Affiliate link

WÜSTHOF Classic Ikon 5-inch hollow edge santoku (4172-7): forged high-carbon stainless at 58 HRC, PEtec, 10-degree edge, dimpled blade, Ikon handle with front and rear bolsters, 4.59 oz, made in Germany.

Pros

  • Keen 10-degree edge
  • Hollow edge releases thin slices
  • Balanced Ikon handle

Cons

  • Thin edge dislikes hard food
  • Short for main-knife duty

Good fit if

  • You want razor-thin vegetable slices
  • You keep a 10-degree sharpener

Skip if

  • You hack through squash rinds
  • The 4172-7 would be your only santoku

Verdict: A precise small santoku for thin slicing.

Specifications side by side

Spec Wüsthof Classic Ikon 5" Santoku Knife
Blade Length 5"
Knife Type Santoku
Blade Material High Carbon Stainless Steel
Construction Precision Forged
Edge Type Hollow edge
Edge Angle 10 degree
Blade Hardness 58-degree HRC
Dimensions 9 × 3 × 1 inches
Weight 4.59 ounces
Size 5"
Color Black, Stainless
Model 4172-7

Frequently asked questions

What edge angle does the WÜSTHOF Ikon 5-inch santoku have?

WÜSTHOF lists a 10-degree cutting edge.

Why does the 4172-7 have dimples?

They are a hollow edge: air pockets help slices release from the blade.

How heavy is the Classic Ikon 5-inch hollow edge santoku?

4.59 ounces.

Is the Ikon 4172-7 forged?

Yes, from a single block of high-carbon stainless steel, tempered to 58 HRC.

Does the Ikon 5-inch santoku come with a warranty?

Yes, WÜSTHOF gives a limited lifetime warranty.

See also