XINZUO 7.6-Inch Damascus Santoku Knife Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The XINZUO 7.6-inch santoku pairs a 10Cr15CoMoV core at 62 HRC with 67 layers of Damascus steel, a hammered pattern meant to stop food sticking, and a black titanium stonewash finish. The handle is burnt white oak with a red G10 ring, and the edge is wet-ground to 15 degrees per side. It suits cooks who want a harder Japanese-style santoku with a distinctive dark finish for slicing vegetables, fish and boneless meat. Choose the XINZUO if you like the santoku's flatter profile and a wood handle; choose the FINTISO Vulpe 8-inch chef knife, the same 10Cr15CoMoV core at 62 HRC, if you rock-chop and want a G10 handle. Choose the BTEPSGA 7-inch nakiri instead if you only cut vegetables. The model field reads 'Professional Damascus Chefs Knife', but the title and blade describe a santoku. This review uses XINZUO's listing and published specs, not hands-on testing.
What stands out
- 7.6-inch santoku
- 10Cr15CoMoV core, 62 HRC, vacuum deep-cooled
- 67-layer Damascus, hammered, black titanium stonewash
- 15-degree edge per side
- Burnt white oak handle with red G10 ring
Who it fits
Good fit for
Buy it if you want a hard, dark-finished Damascus santoku with an oak handle for vegetables, fish and boneless meat.
Who should skip it
Skip it if you want a tougher, easier-to-hone edge or a classic 8-inch chef shape.
Verdict: A hard, hammered Damascus santoku with a striking finish.
XINZUO santoku specs explained
XINZUO 10Cr15CoMoV at 62 HRC
A cobalt-vanadium stainless held at high hardness for long edge life.
Hammered XINZUO finish
Dimples break suction so potato and cucumber slices fall away.
15-degree XINZUO edge
A fine angle per side for thin, clean slices.
Burnt white oak on the XINZUO
Heat-treated wood with a red G10 ring for grip.
7.2-ounce XINZUO weight
The XINZUO is light for long prep sessions.
XINZUO santoku build
The blade combines 67 Damascus layers over the 10Cr15CoMoV core, vacuum deep-cooled to 62 HRC, with a burst hammered pattern and black titanium stonewash. The spine is rounded, and the handle is burnt white oak with a red G10 anti-slip ring. Listed size is 12.8 inches overall and 2.2 inches wide.
Cooking with the XINZUO
Slice and dice with downward and forward strokes; the santoku's flatter belly is less suited to rocking than a chef knife. The hammered face helps with starchy vegetables. Keep the 62 HRC edge off bones and frozen food, hand wash, dry, and sharpen on whetstones.
Before you buy the XINZUO
A 62 HRC edge rewards whetstone care but can chip if twisted. The dark stonewash may show wear over time. If you want a wider knife for scooping, look at an 8-inch chef instead.
Check before you buy
- You prefer a santoku to a chef knife
- You sharpen the XINZUO on stones
- You like an XINZUO oak handle
- You keep the XINZUO off bones
The product at a glance
XINZUO 7.6-Inch Damascus Santoku Knife
Best for: Vegetables, fish and boneless meat
- Blade Length
- 7.6 in
- Knife Type
- Santoku
- Blade Material
- 10Cr15CoMoV Damascus steel
- Construction
- 67-layer Damascus
- Edge Angle
- 15° per side
- Blade Hardness
- 62 HRC
View on Amazon: XINZUO 7.6-Inch Damascus Santoku Knife Affiliate link
XINZUO 7.6 in santoku: 67-layer Damascus over a 10Cr15CoMoV core at 62 HRC, hammered black titanium stonewash, 15-degree edge per side, burnt white oak handle with red G10 ring, 7.2 oz.
Pros
- 62 HRC core
- Hammered anti-stick face
- Distinctive oak and G10 handle
Cons
- Hard edge can chip
- Santoku shape does not rock well
Good fit if
- You prefer santoku slicing
- You use whetstones
Skip if
- You want a rocking chef knife
- You hone on a steel
Verdict: A hard hammered Damascus santoku.
Specifications side by side
| Spec | XINZUO 7.6-Inch Damascus Santoku Knife |
|---|---|
| Blade Length | 7.6 in |
| Knife Type | Santoku |
| Blade Material | 10Cr15CoMoV Damascus steel |
| Construction | 67-layer Damascus |
| Edge Angle | 15° per side |
| Blade Hardness | 62 HRC |
| Handle Material | White oak, G10 |
| Recommended Use | Meat |
| Dimensions | 12.8 × 2.2 × 0.09 inches |
| Weight | 7.2 ounces |
| Size | 7.6" |
| Color | 7.6 Inch Sharp Damascus Santoku Knife |
| Model | Professional Damascus Chefs Knife |
Frequently asked questions
What steel is the XINZUO 7.6-inch santoku?
A 10Cr15CoMoV core with 67 layers of Damascus steel.
How hard is the XINZUO santoku?
62 HRC after vacuum deep-cooling.
What edge angle does XINZUO use?
15 degrees on each side.
What is the XINZUO handle made of?
Burnt white oak with a red G10 ring.
How heavy is the XINZUO santoku?
The listing gives 7.2 ounces.
See also
- tijeras 9 inch vg 10 damascus chef knife review
- mezzo me002 8 inch serrated bread knife review
- isaidno 14 5 inch acacia bread bow knife review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- edgestar 6 inch 7 bottle review
- garveetech 8 inch 6 7 amp table saw review
