ASETY 8-Inch Damascus Chef Knife (60651-1) Review: G10 Handle, Sheath
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The ASETY 60651-1 is an 8-inch Damascus chef knife with 67 layers of steel, a hardness of 60 ± 2 HRC and a V edge honed to 10-15 degrees per side. It has a full tang, a triple-riveted G10 handle, a bolster sloped at 60 degrees for a pinch grip, and comes with a sheath. ASETY says it is NSF certified. It is our pick for cooks who want a low-cost Damascus chef knife with a synthetic, water-tolerant handle and a sheath for drawer storage. Choose this single knife if an 8-inch gyuto is all you need; choose ASETY's 3-piece 60651-1 set if you want a santoku and utility knife in the same style. Note one conflict: the title says VG10 core, while the bullets say 10Cr15CoMoV; we treat the steel as unconfirmed. This review is based on ASETY's listing, without hands-on testing.
What stands out
- 8-inch ASETY 60651-1 chef blade
- 67 Damascus layers, 60 ± 2 HRC
- 10-15° per side V edge
- Full tang, triple-riveted G10 ASETY handle
- Sheath included, NSF certified
Who it fits
Good fit for
Buy the ASETY 60651-1 if you want a full-tang Damascus chef knife on a budget with a G10 handle that tolerates wet hands, a sloped bolster for pinch grip and a sheath for drawer storage.
Who should skip it
Skip the ASETY 60651-1 if you need certainty about the core steel (VG10 in the title, 10Cr15CoMoV in the text), want a lightweight knife, or prefer a wooden handle.
Verdict: A budget full-tang Damascus chef knife with a G10 handle, sheath and an unclear steel claim.
ASETY 60651-1 specs explained
ASETY 60651-1 blade: 8 in, 67 layers
Standard chef length with a Damascus pattern.
ASETY 60651-1 core: VG10 (title) or 10Cr15CoMoV (bullets)
The listing contradicts itself; both are hard stainless grades.
ASETY 60651-1 hardness and edge: 60 ± 2 HRC, 10-15°
A firm core with a fine Japanese-style angle.
ASETY 60651-1 handle: G10, triple rivets, full tang
Water-tolerant synthetic grip with a 60° sloped bolster.
ASETY 60651-1 weight field: 1.23 lb
Includes packaging and sheath; the knife's own weight is not given.
ASETY 60651-1 build
ASETY layers 67 sheets of steel and polishes the blade to show the Damascus texture, which it describes as real Damascus rather than a printed pattern. Hardness is listed at 60 ± 2 HRC, and the V edge is honed to 10-15 degrees per side. The full tang runs into a G-10 handle fixed with three rivets; the bolster slopes at 60 degrees so your thumb and finger sit naturally on the blade. The blade is described as wider than usual for knuckle room. A sheath and gift packaging are included.
Cooking with the ASETY 8-inch chef knife
An 8-inch Damascus chef knife covers dicing onions, slicing tomatoes, chopping herbs and cutting boneless chicken and steak. The fine 10-15 degree edge rewards slicing over forceful chopping; leave bone and frozen food to a cleaver. G10 shrugs off water, but hand wash the blade and dry it promptly, and use the sheath when storing it in a drawer.
Before buying the ASETY 60651-1
The core steel is listed two ways; if VG10 specifically matters, ask the seller first. The 60651-1 model code also covers ASETY's 3-piece set, so check you are ordering the single chef knife. The weight field is a boxed figure.
Check before you buy
- You want an 8-inch ASETY 60651-1 with a sheath
- A G10 ASETY handle suits wet prep
- You accept the ASETY steel conflict
- You want a full-tang budget Damascus gyuto
The product at a glance
ASETY 8 Inch VG10 Damascus Chef Knife
Best for: Budget Damascus chef knife
- Blade Length
- 8 in
- Knife Type
- Chef
- Blade Material
- VG10, 10Cr15CoMoV
- Construction
- 67-layer Damascus, full tang
- Edge Type
- V-shaped
- Edge Angle
- 10–15° per side
View on Amazon: ASETY 8 Inch VG10 Damascus Chef Knife Affiliate link
ASETY 60651-1: 8" chef knife, 67-layer Damascus, core listed as VG10 (title) and 10Cr15CoMoV (bullets), 60 ± 2 HRC, 10-15° per side V edge, full tang, triple-riveted G10 handle, 60° sloped bolster, sheath, NSF certified.
Pros
- Full-tang ASETY 60651-1 with G10 grip
- Sheath included with the ASETY 60651-1
- Sloped ASETY bolster for pinch grip
Cons
- ASETY 60651-1 core steel conflicts
- ASETY 60651-1 own weight not listed
Good fit if
- You want a budget ASETY Damascus gyuto
- You store the ASETY 60651-1 in a drawer
Skip if
- You need confirmed VG10 steel
- You prefer a wood-handled chef knife
Verdict: A budget full-tang Damascus chef knife with a G10 grip and sheath.
Specifications side by side
| Spec | ASETY 8 Inch VG10 Damascus Chef Knife |
|---|---|
| Blade Length | 8 in |
| Knife Type | Chef |
| Blade Material | VG10, 10Cr15CoMoV |
| Construction | 67-layer Damascus, full tang |
| Edge Type | V-shaped |
| Edge Angle | 10–15° per side |
| Blade Hardness | 60 ± 2 HRC |
| Handle Material | G10 |
| Storage Type | Sheath |
| Style | Japanese |
| Weight | 1.23 pounds |
| Size | 8'' |
| Color | Classic Chef Knife |
| Model | 60651-1 |
Frequently asked questions
Is the ASETY 60651-1 chef knife VG10?
The title says VG10, but the bullets describe 10Cr15CoMoV; the listing does not settle it.
What hardness is the ASETY 8-inch Damascus chef knife?
60 ± 2 HRC, with a 10-15 degree per side edge.
Does the ASETY 60651-1 come with a sheath?
Yes, ASETY packs a sheath with the 60651-1 chef knife.
ASETY 60651-1 chef knife or ASETY 3-piece set?
The single chef knife if an 8-inch gyuto is all you need; the 3-piece set to add a santoku and utility knife in the same style.
Is the ASETY 60651-1 NSF certified?
ASETY says its knives have NSF certification.
See also
- golden bird cleaver serbian viking knife roll set review
- kanngou kg8304 7 inch aus 8 nakiri knife review
- uprichya left handed bread bow knife review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- frigidaire 8 review
- pexucalm 8 review
