HexClad 7-Inch Japanese Damascus Cleaver Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The HexClad 7-inch Japanese Damascus cleaver (model CTCLK07-EPW, Espresso handle) is a premium all-purpose cleaver with a 67-layer Damascus stainless blade, a 12-degree double-bevel edge and a Pakkawood handle. HexClad says the edge is set with a three-step Honbazuke heat treatment and sharpening for a mix of hardness and flex, and rates it for turnips, squash, proteins, tendons and even bones. One size detail conflicts: the title says 7-inch, while HexClad's own bullet gives a 7.5-inch blade, a 4.5-inch handle and 12.5 inches overall. No core steel grade, HRC or weight is listed. It is hand wash only, and the lifetime warranty excludes dishwasher use, hard cutting surfaces and foodservice use. Choose the HexClad cleaver if you want a Damascus cleaver that handles squash and some bone work with a warranty behind it; choose the XINZUO XZ06 vegetable cleaver if you only cut produce and want a listed 62 HRC 10Cr15CoMoV core. This HexClad review is based on the listing and published specs, not hands-on testing.
What stands out
- HexClad 67-layer Japanese Damascus stainless
- 12-degree double-bevel Honbazuke edge
- CTCLK07-EPW Pakkawood handle, 4.5"
- 12.5" overall, 7.5" blade per HexClad
- HexClad lifetime warranty (home use)
Who it fits
Good fit for
Buy the HexClad cleaver if you want a premium Damascus cleaver for squash, root vegetables and meat with tendons, and you will hand wash it.
Who should skip it
Skip the HexClad cleaver if you need a listed steel grade and hardness, plan to use the dishwasher, or work in a restaurant (the warranty excludes foodservice).
Verdict: A premium HexClad Damascus cleaver for mixed kitchen work.
HexClad CTCLK07-EPW specs explained
HexClad 67-layer Damascus stainless
Layered cladding; the core grade is not named.
CTCLK07-EPW 12-degree edge
Fine for a cleaver: very sharp, needs regular honing.
HexClad blade 7.5" / overall 12.5"
Slightly longer than the 7-inch title suggests.
HexClad Pakkawood handle, 4.5"
Resin-stabilized wood that tolerates kitchen moisture.
HexClad Honbazuke treatment
A three-stage sharpening process HexClad uses for hardness and flex.
HexClad cleaver build
HexClad builds the CTCLK07-EPW from 67 layers of Japanese Damascus stainless steel with a full tang and a 4.5-inch Espresso Pakkawood handle. The edge is double-beveled at 12 degrees per HexClad's Honbazuke process. The listing gives 12.5 inches overall and a 7.5-inch blade, but no weight, thickness or core steel grade.
Using the HexClad cleaver
Use the HexClad cleaver to split squash and turnips, chop cabbage, portion chicken and cut through tendons; HexClad also says it can take bones, so keep that to smaller poultry bones given the fine 12-degree edge. Wash it by hand, dry it at once and hone it often, as HexClad advises.
HexClad cleaver caveats
The 7-inch title and 7.5-inch blade figure disagree. No HRC, steel grade or weight is published. The HexClad warranty is voided by dishwasher use, cutting on hard surfaces, rust and foodservice use, so read it before buying for a commercial kitchen.
Check before you buy
- Hand wash the HexClad cleaver only
- Keep HexClad bone work to poultry
- Use a wood or plastic board with the HexClad
- Hone the CTCLK07-EPW edge often
The product at a glance
HexClad 7-Inch Japanese Damascus Cleaver
Best for: Home cooks wanting a premium all-round cleaver
- Blade Length
- 7.5 in
- Intended Use
- cutting turnips, squash, proteins, bones
- Blade Steel
- Japanese Damascus stainless steel
- Handle Material
- pakkawood
- Construction
- full tang, 67 layers
View on Amazon: HexClad 7-Inch Japanese Damascus Cleaver Affiliate link
HexClad CTCLK07-EPW cleaver: 67-layer Japanese Damascus stainless, 12° double-bevel Honbazuke edge, 7.5" blade per bullet (7" title), 4.5" Espresso Pakkawood handle, lifetime warranty.
Pros
- Fine 12° edge for a cleaver
- Rated for squash, tendons and some bone
- Lifetime warranty for home use
Cons
- No core steel, HRC or weight listed
- Hand wash only
Good fit if
- You want a premium HexClad Damascus cleaver
- You cut squash and meat with tendons
Skip if
- You need a HexClad for restaurant use
- You want a dishwasher-safe cleaver
Verdict: A premium HexClad cleaver with a fine Damascus edge.
Specifications side by side
| Spec | HexClad 7-Inch Japanese Damascus Cleaver |
|---|---|
| Blade Length | 7.5 in |
| Intended Use | cutting turnips, squash, proteins, bones |
| Blade Steel | Japanese Damascus stainless steel |
| Handle Material | pakkawood |
| Construction | full tang, 67 layers |
| Blade Material | Stainless Steel |
| Style | Japanese |
| Size | 7-Inch Cleaver Knife |
| Color | Espresso |
| Model | CTCLK07-EPW |
Frequently asked questions
How long is the HexClad 7-inch cleaver blade?
HexClad's bullet lists a 7.5-inch blade and 12.5 inches overall.
Is the HexClad cleaver dishwasher safe?
No, HexClad says hand wash only; the dishwasher voids its warranty.
Can the HexClad cleaver cut bones?
HexClad rates it for tendons and bones; keep it to poultry bones with a 12-degree edge.
What steel is the HexClad CTCLK07-EPW?
67-layer Japanese Damascus stainless; HexClad names no core grade or HRC.
HexClad cleaver or XINZUO XZ06?
HexClad for mixed meat and squash work with a warranty; XINZUO for vegetables with a listed 62 HRC core.
Featured in
See also
- zwilling gourmet 7 1 inch hollow edge santoku review
- wusthof classic ikon 8 inch custom engraved review
- wusthof classic purple yam 7 inch santoku review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- hexclad hybrid nonstick japanese tamagoyaki review
- brama 6 7 cu ft stainless review
