As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HEZHEN 5.3-Inch Clad Steel Utility (Petty) Knife Review: Redwood Octagonal Handle

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The HEZHEN 5.3-inch utility knife is a Japanese-style petty knife with three-layer clad steel around a 10Cr15CoMoV core, vacuum heat treated to 60 ± 2 HRC, sharpened to a 15 degree per side V edge. The blade has a black stonewashed, hand-hammered finish, and the octagonal handle is redwood with a black buffalo horn ferrule. It is our pick for cooks who want a rustic-looking petty knife for fruit, shallots, herbs and small trimming jobs, with a stated hardness and edge angle. Choose the HEZHEN if you want those specs written down and a traditional wa handle; choose the FANTECK DMS-006D1 5-inch utility if you prefer a polished Damascus VG10 blade and a blue G10 grip, though its listing states far less. HEZHEN backs the knife with a lifetime warranty when bought direct. What follows is drawn from HEZHEN's listing; the knife was not tested.

What stands out

  • 5.3-inch HEZHEN petty blade
  • Three HEZHEN clad layers around 10Cr15CoMoV
  • 60 ± 2 HRC, 15° per side V edge
  • Black stonewashed, hammered HEZHEN finish
  • Redwood and buffalo horn octagonal handle

Who it fits

Good fit for

Buy the HEZHEN 5.3-inch utility knife if you want a small Japanese-style petty knife with a hard clad core, a rustic dark finish and a wa-style octagonal handle for fruit, garlic, herbs and fine trimming.

Who should skip it

Skip the HEZHEN 5.3-inch petty if you want a polished or Damascus-patterned blade, need a dishwasher-safe handle, or want a full tang (a wa handle usually uses a hidden tang; HEZHEN does not say).

Verdict: A rustic clad-steel petty knife with clear specs and a wa-style handle.

HEZHEN 5.3-inch utility specs explained

HEZHEN petty blade: 5.3 in, 0.09 in thick

Thin stock for peeling, slicing and detail work.

HEZHEN petty steel: 3-layer clad, 10Cr15CoMoV core

Hard core for the edge, softer outer layers for toughness.

HEZHEN petty hardness: 60 ± 2 HRC

Firm enough to hold a fine edge.

HEZHEN petty edge: 15° per side, wet-ground V

Works for right- and left-handed users.

HEZHEN petty handle: redwood, buffalo horn ferrule

Traditional octagon; weight field 3.68 oz.

HEZHEN 5.3-inch utility build

HEZHEN composite-forges three layers of steel around a 10Cr15CoMoV core and lists vacuum heat treatment to 60 ± 2 HRC. The blade is hand-hammered, then blackened with a stonewash effect, polished and sandblasted for a retro look. The edge is a wet, hand-ground V at 15 degrees per side. The octagonal handle combines redwood with black buffalo horn. The model field calls it a 5-inch utility knife while the title says 5.3 inches; the dimension fields suggest a thin 0.09-inch blade.

Using the HEZHEN petty knife

A 5.3-inch petty sits between a parer and a chef knife: hull strawberries, segment citrus, slice shallots and garlic, trim chicken thighs and cut sandwiches. Use it on the board rather than in hand for most jobs, since the length makes in-hand peeling a little awkward. Wipe the stonewashed blade dry after use, hand wash only, and oil the redwood now and then.

Before buying the HEZHEN 5.3-inch utility

The title says 5.3 inches and the model field says 5 inches; the difference is likely edge length versus nominal size. HEZHEN does not state the tang type. The lifetime warranty applies to knives bought directly from HEZHEN.

Check before you buy

  • You want a 5.3-inch HEZHEN petty for small prep
  • The HEZHEN stonewashed look appeals
  • You can care for a HEZHEN redwood octagon
  • A stated 60 HRC matters to you

The product at a glance

HEZHEN 5.3-Inch Clad Steel Utility Knife

Best for: Japanese-style petty knife

Blade Length
5.3 in
Knife Type
Utility Knife
Blade Material
10Cr15CoMoV steel core
Construction
3-layer composite forging
Edge Type
V type
Edge Angle
15° per side

View on Amazon: HEZHEN 5.3-Inch Clad Steel Utility Knife Affiliate link

HEZHEN 5.3" utility/petty knife: 3-layer clad steel over a 10Cr15CoMoV core, 60 ± 2 HRC, 15° per side wet-ground V edge, hand-hammered black stonewashed finish, redwood and buffalo horn octagonal handle, about 0.09" thick; lifetime warranty when bought direct.

Pros

  • Stated 60 HRC HEZHEN clad core
  • Thin 0.09-inch HEZHEN petty blade
  • Redwood and horn HEZHEN octagon

Cons

  • HEZHEN petty tang type not listed
  • HEZHEN redwood needs hand care

Good fit if

  • You want a wa-handled HEZHEN petty
  • You like HEZHEN's dark stonewashed finish

Skip if

  • You want a polished Damascus petty
  • You need a dishwasher-safe petty knife

Verdict: A rustic clad-steel petty knife with clear, useful specs.

Specifications side by side

Spec HEZHEN 5.3-Inch Clad Steel Utility Knife
Blade Length 5.3 in
Knife Type Utility Knife
Blade Material 10Cr15CoMoV steel core
Construction 3-layer composite forging
Edge Type V type
Edge Angle 15° per side
Blade Hardness 60±2 HRC
Handle Material Redwood and black buffalo horn
Style Japanese
Recommended Use Peeling, Fruit
Dimensions 11.2 × 1.12 × 0.09 inches
Weight 3.68 ounces
Size 5.3 inch Utility Knife
Color Black
Model Clad Steel 5" Utility Knife

Frequently asked questions

What steel is the HEZHEN 5.3-inch utility knife?

Three-layer clad steel with a 10Cr15CoMoV core at 60 ± 2 HRC.

What is the HEZHEN petty handle made of?

Redwood with a black buffalo horn section, in an octagonal shape.

Is the HEZHEN 5.3-inch utility knife ambidextrous?

Yes; HEZHEN says the 15-degree V edge suits right and left hands.

HEZHEN 5.3-inch petty or FANTECK DMS-006D1?

The HEZHEN for stated hardness, edge angle and a wa handle; the FANTECK for a polished VG10 Damascus blade with a G10 grip.

Does the HEZHEN utility knife have a warranty?

HEZHEN lists a lifetime warranty for knives bought direct.

See also