As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HOSHANHO 7-Inch 9-Layer Hammered Nakiri Review: Rosewood Octagon Handle

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The HOSHANHO HSHES-2024-003-3 is a 7-inch nakiri with a 9-layer composite blade wrapped around a 10Cr15CoMoV core, cryogenically treated to 60±2 HRC. The 2.5 mm double-bevel blade is sharpened to 12-15 degrees per side and has a black oxide, stonewashed and hammered finish to help food fall away, set in an octagonal rosewood handle with two copper wire inlays. Its square, flat edge suits straight-down chopping of cabbage, sweet potato, zucchini and leafy greens. Choose this HOSHANHO nakiri if you want a laminated, dark-finished blade and a traditional octagon handle; choose the cheaper HOSHANHO 7-inch nakiri with a Pakkawood handle if you are happy with a plain single-steel blade at a 15-degree edge. One caveat: 10Cr15CoMoV is usually a Chinese-made grade, even though HOSHANHO frames the build as Japanese. The review is built from HOSHANHO's listing and published specs, not from hands-on tests.

What stands out

  • Nine-layer HSHES-2024-003-3 nakiri blade
  • 60±2 HRC after cryogenic treatment
  • 12-15 degree double-bevel HOSHANHO edge
  • Black stonewashed, hammered HSHES-2024-003-3 finish
  • HSHES-2024-003-3 rosewood octagon with two copper bands

Who it fits

Good fit for

Buy the HOSHANHO HSHES-2024-003-3 if you chop a lot of vegetables and want a laminated, hammered nakiri with a wooden octagon handle at a mid price.

Who should skip it

Skip this HOSHANHO nakiri if you rock-chop, cut through bones or frozen food, or would rather not oil a rosewood handle.

Verdict: A good-looking laminated nakiri for vegetable chopping, priced above HOSHANHO's plainer nakiri.

HOSHANHO HSHES-2024-003-3 specs explained

HSHES-2024-003-3 blade: 7 in nakiri, 2.5 mm thick

Square tip and flat edge for full board contact.

HSHES-2024-003-3 steel: 9 layers over 10Cr15CoMoV

Softer outer layers protect a harder cobalt-alloy core.

HSHES-2024-003-3 hardness: 60±2 HRC

Holds an edge well; avoid twisting or chopping bone.

HSHES-2024-003-3 edge: 12-15 degrees per side

A fine double bevel for thin, clean slices.

HSHES-2024-003-3 handle: rosewood octagon, copper wires

Traditional grip shape; needs drying and occasional oil.

HOSHANHO HSHES-2024-003-3 build

HOSHANHO hones the HSHES-2024-003-3 with the Honbazuke method and finishes it with black oxide, stonewashing and a hammered texture, so the blade is dark and dimpled rather than polished. The octagonal rosewood handle carries two copper wire bands. The listed 8.32 oz weight is reasonable for a 7-inch nakiri; no tang type or warranty is stated.

Using the HOSHANHO nakiri

Use the HSHES-2024-003-3 for push cuts and straight chops: shredding cabbage, slicing zucchini, cubing sweet potatoes and cutting even rounds of carrot. The tall blade scoops chopped food off the board. Hand wash it, dry it at once (the black oxide finish can wear with scrubbing), and keep it away from bones and frozen food.

Before buying the HOSHANHO HSHES-2024-003-3

The listing gives no tang type and no warranty term. The coatings and hammered texture are cosmetic as much as functional and may wear over years of washing. HOSHANHO calls the knife a meat and vegetable cleaver, but it is a thin vegetable knife, not a bone chopper.

Check before you buy

  • You chop rather than rock with the HSHES-2024-003-3
  • You will dry and oil the HOSHANHO rosewood handle
  • You want a laminated HOSHANHO blade over plain steel
  • You keep the HSHES-2024-003-3 away from bones

The product at a glance

HOSHANHO 7-Inch Composite Steel Nakiri Knife

Best for: Vegetable chopping

Blade Length
7 in
Knife Type
Nakiri
Blade Material
10Cr15CoMoV core
Construction
9 layers of composite steel
Edge Type
Double-bevel
Edge Angle
12–15°

View on Amazon: HOSHANHO 7-Inch Composite Steel Nakiri Knife Affiliate link

HOSHANHO HSHES-2024-003-3 7" nakiri: 9-layer composite steel over a 10Cr15CoMoV core, 60±2 HRC, 2.5 mm double bevel at 12-15°, black oxide stonewashed hammered finish, octagonal rosewood handle with copper wires, 8.32 oz.

Pros

  • Laminated 9-layer HOSHANHO blade
  • Fine 12-15° HSHES-2024-003-3 edge
  • Hammered HOSHANHO finish limits sticking

Cons

  • HSHES-2024-003-3 black finish may wear
  • No tang or warranty listed by HOSHANHO

Good fit if

  • You want a laminated HOSHANHO nakiri for vegetables
  • You like octagonal wood handles

Skip if

  • You need a bone-chopping HOSHANHO cleaver
  • You want the cheaper HOSHANHO Pakkawood nakiri

Verdict: A handsome laminated nakiri for fast vegetable chopping.

Specifications side by side

Spec HOSHANHO 7-Inch Composite Steel Nakiri Knife
Blade Length 7 in
Knife Type Nakiri
Blade Material 10Cr15CoMoV core
Construction 9 layers of composite steel
Edge Type Double-bevel
Edge Angle 12–15°
Blade Hardness 60±2
Handle Material Rosewood
Color Gray
Recommended Use Vegetables, Meat
Weight 8.32 ounces
Size 7"
Model HSHES-2024-003-3

Frequently asked questions

What steel is the HOSHANHO HSHES-2024-003-3 nakiri?

Nine layers of composite steel around a 10Cr15CoMoV core at 60±2 HRC.

What edge angle does the HOSHANHO HSHES-2024-003-3 have?

12-15 degrees on both sides of a 2.5 mm double-bevel blade.

Can the HOSHANHO HSHES-2024-003-3 chop meat bones?

No; it is a thin vegetable nakiri, so keep it to produce and boneless food.

Is the HSHES-2024-003-3 handle real rosewood?

HOSHANHO lists an octagonal rosewood handle with two copper wire bands.

HOSHANHO HSHES-2024-003-3 or HOSHANHO Pakkawood nakiri?

This one for a 9-layer hammered blade and wood octagon; the Pakkawood nakiri for a cheaper single-steel blade.

See also