imarku TK01 6.7-Inch Dual-Zone Serbian Cleaver Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The imarku TK01 is a 6.7-inch Serbian-style butcher cleaver with two edges on one blade: the front 4.3 inches are sharpened to 30 degrees for slicing meat and vegetables, and the rear 2.4 inches to 40 degrees for chopping poultry bones and ribs. The blade is 3 mm Japanese high-carbon stainless, oil-quenched and tempered to 52 HRC for toughness, 3.9 inches wide, with a black nonstick coating, on a curved black pakkawood handle with three rivets; imarku gives 14.5 oz. Choose the TK01 over the imarku TS06 if you break down chickens and chop ribs, since the TS06's 2.3 mm, 59 HRC edge is for slicing only; choose the Mueller FBK-735 if you want a Serbian blade with a sheath and no coating. imarku says to avoid thick beef leg bones, frozen blocks, twisting and prying, and not to use a dishwasher. This look at the imarku TK01 relies on its listing and published specs, not hands-on testing.
What stands out
- Two-angle imarku TK01 edge: 30 degrees front, 40 degrees rear
- 3 mm TK01 blade tempered to 52 HRC for impact toughness
- 14.5 oz TK01 weight helps it chop
- Black nonstick TK01 coating releases food
- Three-rivet curved pakkawood handle
Who it fits
Good fit for
Buy the imarku TK01 if you portion meat, split chickens and chop pork ribs at home and want one cleaver that also slices.
Who should skip it
Skip the imarku TK01 if you want an edge that stays sharp for a long time (52 HRC needs regular touch-ups) or if you plan to cut beef leg bones or frozen meat.
Verdict: A smart dual-zone butcher cleaver for home bone work; soft steel means more sharpening.
imarku TK01 specs explained
imarku TK01 front 4.3 inches at 30 degrees
Sharp enough to slice meat and vegetables, sturdier than a chef's knife edge.
imarku TK01 rear 2.4 inches at 40 degrees
A blunt, strong bevel near the handle for poultry bones and ribs.
imarku TK01 52 HRC
Soft for a kitchen knife: it bends rather than chips, and sharpens quickly.
imarku TK01 3 mm, 3.9-inch-wide blade
Thick and tall for chopping force and knuckle clearance.
imarku TK01 nonstick coating
Helps food release; hand washing protects it.
How the imarku TK01 is built
imarku describes Japanese high-carbon stainless steel, oil-quenched and tempered to 52 HRC, with a sanded face under a black nonstick coating. The curved black pakkawood handle is held by three rivets. The size field says 7 inches; the bullets give 6.7 inches long and 3.9 inches wide for the blade.
Using the imarku TK01
Slice and portion with the front of the TK01 blade, then move the bone near the heel and chop with the 40-degree rear section. Use firm, straight strokes and let the 14.5 oz weight do the work. Do not twist the blade in a joint. Hand wash, dry at once, and hone often, since a 52 HRC edge rolls sooner than harder steels.
Before you buy the imarku TK01
The TK01 is not a heavy bone axe: imarku draws the line at thick beef leg bones and frozen blocks. If you mostly cut vegetables, the thinner imarku TS06 or I-KC0009 will feel lighter and cut cleaner.
Check before you buy
- Chop bones only with the imarku TK01 rear edge
- Hone the 52 HRC TK01 edge often
- Hand wash the TK01; no dishwasher
- Keep beef leg bones and frozen blocks away from the TK01
The product at a glance
Imarku 6.7" Dual-Zone Serbian Cleaver
Best for: Home butchery
- Blade Length
- 6.7 in
- Intended Use
- portions meat, breaks down poultry, ribs
- Blade Steel
- Japanese high carbon stainless steel
- Handle Material
- pakkawood
- Construction
- full tang
- Hardness
- 52 HRC
View on Amazon: Imarku 6.7" Dual-Zone Serbian Cleaver Affiliate link
imarku TK01: 6.7" Serbian butcher cleaver; front 4.3" at 30°, rear 2.4" at 40°; 3 mm Japanese high-carbon stainless, 52 HRC, 14.5 oz, black nonstick coating, three-rivet pakkawood; hand wash only.
Pros
- Dual-zone imarku edge
- 3 mm TK01 blade for bones
- Riveted pakkawood
Cons
- 52 HRC TK01 dulls faster
- No dishwasher for the TK01
Good fit if
- You chop chicken and ribs
- You want one imarku blade for meat and bone
Skip if
- You want long edge life
- You cut beef leg bones
Verdict: imarku's dual-zone cleaver for home butchery.
Specifications side by side
| Spec | Imarku 6.7" Dual-Zone Serbian Cleaver |
|---|---|
| Blade Length | 6.7 in |
| Intended Use | portions meat, breaks down poultry, ribs |
| Blade Steel | Japanese high carbon stainless steel |
| Handle Material | pakkawood |
| Construction | full tang |
| Hardness | 52 HRC |
| Blade Thickness | 3 mm |
| Style | Japanese |
| Recommended Use | Meat |
| Size | 7" |
| Color | Deep Black and Silver |
| Model | TK01 |
Frequently asked questions
What is a dual-zone cleaver like the imarku TK01?
One blade with two bevels: a 30-degree front for slicing and a 40-degree rear for chopping bone.
How hard is the imarku TK01 steel?
imarku lists 52 HRC, tempered for toughness rather than edge life.
Can the imarku TK01 cut beef bones?
Poultry bones and ribs, yes; imarku says to avoid thick beef leg bones.
Is the imarku TK01 dishwasher safe?
No. imarku asks for hand washing to protect the edge, handle and coating.
imarku TK01 or TS06?
The TK01 chops bones with a 3 mm blade; the TS06 is a 2.3 mm, 59 HRC slicing cleaver.
Featured in
See also
- shi ba zi zuo sl2118 y 7 5 inch rosewood cleaver review
- enoking bc002 6 7 inch serbian cleaver review
- wusthof gourmet 4 piece chef s knife review
- imarku cleaver knife 7 inch review
- imarku 6 3 meat cleaver review
- imarku TS06 7.5-Inch Pakkawood Cleaver Review: 59 HRC, 2.3 mm Blade
- frostvale 6 5 cu ft dual zone review
- webeauty dual voltage webeauty 6 review
