As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

imarku TS06 7.5-Inch Pakkawood Cleaver Review: 59 HRC, 2.3 mm Blade

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The imarku TS06 is a 7.5-inch Chinese-style cleaver in Japanese high-carbon stainless steel, rated 59±2 HRC, the hardest figure imarku lists for any of its cleavers. The blade is 2.3 mm (±0.1) thick, hand-sharpened to 15 degrees on both sides, and sits on an FSC-certified pakkawood handle; the listing gives 12.3 oz. That makes the TS06 a slicing and chopping cleaver for vegetables, herbs and boneless meat, not a bone chopper. Choose the TS06 over the imarku TS07 if you want a longer 7.5-inch blade and a stated hardness (the 6.3-inch TS07 lists neither HRC nor thickness); choose the imarku TK01 Serbian cleaver if you chop poultry bones and ribs, since its 3 mm blade and 40-degree rear edge are made for that. imarku covers defects for life with a free exchange. This review of the imarku TS06 uses its listing and published specs, not hands-on testing.

What stands out

  • 59±2 HRC, the hardest imarku cleaver rating
  • Thin 2.3 mm TS06 blade for clean vegetable cuts
  • 15-degree edge on both sides of the TS06
  • FSC-certified pakkawood TS06 handle
  • Lifetime free exchange for defects from imarku

Who it fits

Good fit for

Buy the imarku TS06 if you want a tall, sharp Chinese cleaver that slices, minces and scoops vegetables and boneless meat, and holds its edge.

Who should skip it

Skip the imarku TS06 if you chop through bones or frozen food; a 2.3 mm edge at 59 HRC can chip. The imarku TK01 or a heavier meat cleaver suits that work.

Verdict: A hard, thin 7.5-inch slicing cleaver; imarku's best for daily vegetable and boneless prep.

imarku TS06 specs explained

imarku TS06 59±2 HRC

High for a cleaver: the edge stays sharp longer, but a twist or a bone can chip it.

imarku TS06 2.3 mm blade

Thin enough to slice onions and cabbage cleanly; too thin to hack bones.

imarku TS06 15-degree double bevel

A keen, symmetrical edge for left- and right-handed cooks.

imarku TS06 7.5-inch length, 3.5-inch height

A big flat face to scoop food and keep knuckles off the board.

imarku TS06 weight 12.3 oz

Light for a 7.5-inch cleaver; good for long prep sessions.

How the imarku TS06 is built

imarku calls the TS06 blade precision-forged Japanese high-carbon stainless steel, without naming the grade. The handle is FSC-certified pakkawood with an ergonomic contour. The listing gives no tang description and no dishwasher statement beyond hand washing.

Using the imarku TS06

Use the full height of the TS06 blade for push cuts through cabbage, peppers and onions, the flat for crushing garlic and the face for scooping food into the pan. Thin slices of boneless pork or chicken work well. For anything with bone, switch to another knife. imarku suggests hand washing with clean water, wiping completely dry and touching up on a whetstone.

Before you buy the imarku TS06

A cleaver this thin and hard is closer to a Chinese vegetable cleaver than to a Western meat cleaver; buy it for slicing. The imarku I-KC0009 is a cheaper 7-inch alternative at 57 HRC and 2.4 mm.

Check before you buy

  • Keep the imarku TS06 away from bones and frozen food
  • Hand wash and dry the TS06 pakkawood handle
  • Touch up the TS06 on a whetstone, not a pull-through
  • Compare the cheaper imarku I-KC0009 at 57 HRC

The product at a glance

Imarku 7.5-Inch Japanese Steel Cleaver

Best for: Vegetable-heavy cooking

Blade Length
7.5"
Intended Use
Chopping, meat cutting
Blade Steel
Japanese high carbon stainless steel
Handle Material
FSC-certified Pakkawood
Construction
Precision-forged
Hardness
59±2 HRC

View on Amazon: Imarku 7.5-Inch Japanese Steel Cleaver Affiliate link

imarku TS06: 7.5" cleaver, Japanese high-carbon stainless, 59±2 HRC, 2.3 mm blade, 15° double bevel, FSC pakkawood handle, 12.3 oz; hand wash, lifetime defect exchange.

Pros

  • 59±2 HRC on the TS06
  • Thin 2.3 mm imarku blade
  • Pakkawood TS06 handle

Cons

  • imarku TS06 not for bones
  • Steel grade not named

Good fit if

  • You slice vegetables with a cleaver
  • You want imarku's hardest cleaver

Skip if

  • You chop ribs
  • You use a dishwasher

Verdict: imarku's hard, thin 7.5-inch slicing cleaver.

Specifications side by side

Spec Imarku 7.5-Inch Japanese Steel Cleaver
Blade Length 7.5"
Intended Use Chopping, meat cutting
Blade Steel Japanese high carbon stainless steel
Handle Material FSC-certified Pakkawood
Construction Precision-forged
Hardness 59±2 HRC
Blade Thickness 2.3mm±0.1
Blade Material High-Carbon Steel
Style Japanese
Recommended Use Meat
Dimensions 12.6 × 1 × 3.5 inches
Weight 12.3 ounces
Size 7.5"
Color Silver walnut
Model TS06

Frequently asked questions

How hard is the imarku TS06 cleaver?

imarku rates the TS06 at 59±2 HRC.

Can the imarku TS06 chop bones?

No. The TS06 is 2.3 mm thick and meant for vegetables and boneless meat; the imarku TK01 handles bones.

What edge angle does the imarku TS06 have?

15 degrees on each side, sharpened by hand.

Is the imarku TS06 dishwasher safe?

imarku says to hand wash the TS06 and wipe it dry.

imarku TS06 or TS07?

The TS06 is 7.5 inches with 59±2 HRC listed; the TS07 is 6.3 inches in three-layer 10Cr15CoMoV with no HRC given.

See also