MASAMOTO AT US-AT5614 Japanese Honesuki Boning Knife Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The MASAMOTO AT US-AT5614 is a 5.7-inch (145 mm) honesuki: the stiff, triangular Japanese boning knife made for taking chickens apart at the joints. AT is Masamoto Sohonten's home-kitchen line, with a western-style handle. The blade is Masamoto's Molybdenum Vanadium high-carbon stainless steel at HRC 57, the tang runs full length under a black Pakkawood handle with a stainless bolster, and the knife is made in Japan. The listing gives 6.1 ounces. Choose the AT5614 if you want an authentic Japanese honesuki with a wood-composite handle at the lower Masamoto price; choose the MASAMOTO VG US-VG5614 if you want the harder HRC 58-59 Hyper Molybdenum Vanadium blade and a POM handle for heavy, wet use. We worked from Masamoto's listing and published specs, not from hands-on use.
What stands out
- 5.7-inch (145 mm) honesuki, US-AT5614
- Molybdenum Vanadium stainless, HRC 57
- Full tang with stainless bolster
- Black Pakkawood handle
- Made in Japan, 6.1 oz
Who it fits
Good fit for
Buy it if you break down whole chickens or duck and want a stiff Japanese poultry knife that is easy to resharpen.
Who should skip it
Skip it if you want a flexible boning or fillet knife, or the harder steel of Masamoto's VG line.
Verdict: A made-in-Japan honesuki for home cooks who joint poultry often.
MASAMOTO AT5614 specs explained
Honesuki triangle profile on the AT5614
A stiff, pointed blade that works into chicken joints and along the carcass.
HRC 57 Molybdenum Vanadium stainless
Softer than the VG line, so the edge is quick to bring back on a stone.
145 mm AT blade length
Short enough for close work around thigh and wing joints.
Pakkawood on the Masamoto AT
A wood-resin handle that grips well; Masamoto calls it non-slip.
6.1 ounces on the AT5614
Light and handy; the knife is guided, not swung.
MASAMOTO AT honesuki build
The AT5614 has a western-style handle: full tang, stainless steel bolster covering the joint, and curved black Pakkawood scales. Masamoto says the honesuki is thinner and lighter than its larger garasuki boning knife but keeps a tough edge. The listing gives no edge angle or bevel layout.
Breaking down a chicken with the AT5614
Cut the skin between leg and body, pop the hip joint and follow it with the tip, then run the blade along the backbone and keel to lift the breasts. Masamoto also suggests fish filleting and trimming red meat, but the stiff blade is happiest on poultry. Hand wash and dry after use.
Before you buy the Masamoto AT honesuki
Use the spine side, not the edge, for cracking through bone: a honesuki is for joints, not chopping. The AT5614 costs as much as many premium chef knives, so a cheap stainless boner may suit occasional use better.
Check before you buy
- You joint whole birds often
- A western Pakkawood handle suits you
- You keep the AT5614 sharp on whetstones
- HRC 57 is enough hardness for you
The product at a glance
MASAMOTO AT 5.7" Honesuki Boning Knife
Best for: Jointing chicken and duck
- Blade Length
- 5.7 in (145 mm)
- Knife Type
- Honesuki boning knife
- Blade Material
- Molybdenum Vanadium stainless steel
- Blade Hardness
- 57 HRC
- Handle Material
- Pakkawood
- Construction
- Full Tang
View on Amazon: MASAMOTO AT 5.7" Honesuki Boning Knife Affiliate link
MASAMOTO AT US-AT5614 5.7 in (145 mm) honesuki: Molybdenum Vanadium high-carbon stainless at HRC 57, full tang, stainless bolster, black Pakkawood handle, 6.1 oz, made in Japan.
Pros
- Authentic Japanese honesuki
- Easy to resharpen at HRC 57
- Full tang, bolstered handle
Cons
- High price for a boning knife
- No edge angle listed
Good fit if
- You break down poultry
- You want a Japanese-made knife
Skip if
- You need a flexible fillet knife
- You want the hardest edge
Verdict: A made-in-Japan poultry boning knife for home cooks.
Specifications side by side
| Spec | MASAMOTO AT 5.7" Honesuki Boning Knife |
|---|---|
| Blade Length | 5.7 in (145 mm) |
| Knife Type | Honesuki boning knife |
| Blade Material | Molybdenum Vanadium stainless steel |
| Blade Hardness | 57 HRC |
| Handle Material | Pakkawood |
| Construction | Full Tang |
| Color | Black |
| Style | Japanese |
| Recommended Use | Boning, Meat |
| Weight | 6.1 ounces |
| Size | 5.7" |
| Model | US-AT5614 |
Frequently asked questions
What steel is the MASAMOTO AT honesuki?
Masamoto's Molybdenum Vanadium high-carbon stainless steel at HRC 57.
How long is the US-AT5614 blade?
5.7 inches, or 145 mm.
What handle does the MASAMOTO AT5614 have?
Black Pakkawood on a full tang with a stainless bolster.
Where is the MASAMOTO AT honesuki made?
In Japan, by Masamoto Sohonten.
How does the AT5614 differ from the VG5614?
The VG has harder Hyper Molybdenum Vanadium steel (HRC 58-59) and a POM handle.
