MASAMOTO VG US-VG5614 Japanese Honesuki Boning Knife Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The MASAMOTO VG US-VG5614 is a 5.7-inch (145 mm) honesuki from Masamoto Sohonten's professional VG line, the stiff triangular knife Japanese cooks use to break down poultry. Its blade is Hyper Molybdenum Vanadium high-carbon stainless at HRC 58-59, with what Masamoto calls a thin blade geometry; the full tang sits under a stainless bolster and a black Duracon POM handle, and it is made in Japan at 6.2 ounces. The POM handle and harder steel are why this is our pick for kitchens that joint a lot of birds. Choose the VG5614 if you want a harder edge and a synthetic handle that shrugs off water; choose the MASAMOTO AT US-AT5614 if you prefer a Pakkawood handle and easier sharpening at HRC 57 for less money. This review draws on Masamoto's listing and published specs; nothing was tested hands-on.
What stands out
- 5.7-inch (145 mm) honesuki, US-VG5614
- Hyper Molybdenum Vanadium stainless, HRC 58-59
- Professional VG line, thin blade geometry
- Duracon POM handle, full tang, stainless bolster
- Made in Japan, 6.2 oz
Who it fits
Good fit for
Buy it if you break down a lot of poultry and want a hard, thin Japanese edge on a handle that copes with constant washing.
Who should skip it
Skip it if you only joint a chicken now and then, or want a flexible fish knife.
Verdict: Masamoto's professional honesuki: harder steel and a tougher handle than the AT.
MASAMOTO VG5614 specs explained
Hyper Molybdenum Vanadium at HRC 58-59
Harder than the AT line's HRC 57, so the VG5614 edge lasts longer between stones.
Duracon POM handle on the VG
An engineering plastic that does not swell or crack with water.
145 mm triangular VG blade
A short, pointed honesuki for joints and the backbone.
Masamoto's thin VG geometry
Thinner stock glides through skin and cartilage with less effort.
6.2 ounces for the VG5614
Almost the same weight as the AT version.
MASAMOTO VG honesuki build
The VG5614 shares the honesuki shape, 145 mm length and full-tang, bolstered western handle of the AT5614; the differences are the steel (Hyper Molybdenum Vanadium, HRC 58-59) and the black Duracon POM handle. Masamoto says the honesuki is thinner and lighter than its garasuki. The listing gives no edge angle.
Jointing poultry with the VG5614
Score around the thigh, pop the hip joint and trace it with the tip; free the wings at the shoulder, then follow the keel bone to lift each breast. The listing also suggests filleting fish and trimming red meat. Wipe the blade between birds and dry it before storing.
Before you buy the Masamoto VG honesuki
A harder edge is more prone to chipping: twist through joints, never pry through bone with the tip. The VG line costs a little more than the AT, so the upgrade pays mainly if you joint birds every week.
Check before you buy
- You break down poultry every week
- A plastic POM handle suits a busy sink
- You maintain edges on whetstones
- You want Masamoto's professional line
The product at a glance
MASAMOTO 5.7" VG Honesuki Boning Knife
Best for: Frequent poultry butchery
- Blade Length
- 5.7 in (145 mm)
- Knife Type
- Honesuki boning knife
- Blade Material
- Hyper Molybdenum Vanadium steel
- Blade Hardness
- 58-59 HRC
- Handle Material
- POM Duracon
- Construction
- Full Tang
View on Amazon: MASAMOTO 5.7" VG Honesuki Boning Knife Affiliate link
MASAMOTO VG US-VG5614 5.7 in (145 mm) professional honesuki: Hyper Molybdenum Vanadium high-carbon stainless at HRC 58-59, thin geometry, full tang, stainless bolster, black Duracon POM handle, 6.2 oz, made in Japan.
Pros
- Harder HRC 58-59 edge
- Water-proof POM handle
- Made in Japan
Cons
- Costs more than the AT
- Hard edge can chip if twisted
Good fit if
- You joint poultry often
- You want a pro-line Japanese knife
Skip if
- You need a flexible boner
- You cut poultry rarely
Verdict: A harder, pro-line honesuki for frequent poultry work.
Specifications side by side
| Spec | MASAMOTO 5.7" VG Honesuki Boning Knife |
|---|---|
| Blade Length | 5.7 in (145 mm) |
| Knife Type | Honesuki boning knife |
| Blade Material | Hyper Molybdenum Vanadium steel |
| Blade Hardness | 58-59 HRC |
| Handle Material | POM Duracon |
| Construction | Full Tang |
| Color | Black |
| Style | Japanese |
| Recommended Use | Boning, Meat |
| Weight | 6.2 ounces |
| Size | 5.7" |
| Model | US-VG5614 |
Frequently asked questions
What hardness is the MASAMOTO VG honesuki?
HRC 58-59, in Masamoto's Hyper Molybdenum Vanadium stainless.
What is the VG5614 handle made of?
Black Duracon POM, on a full tang with a stainless bolster.
Is the MASAMOTO VG5614 made in Japan?
Yes, by Masamoto Sohonten.
How heavy is the MASAMOTO VG honesuki?
Masamoto lists 6.2 ounces.
Is the VG5614 better than the AT5614?
It has harder steel and a synthetic handle; the AT has Pakkawood and costs less.
