As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Mitsumoto Sakari MS-1881-H 7.7-Inch Damascus Santoku Review: S440C Core, Kurouchi Finish

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Mitsumoto Sakari MS-1881-H is a 7.7-inch (196 mm) santoku with an S440C powder steel core at HRC 60 ± 1, 73 layers of folded Damascus cladding, a black-forged hammered (kurouchi) finish and a full-tang bloodwood and G10 handle. It weighs about 214 g with a slim 1.7 mm spine and a 50 mm blade height. It is our pick for cooks who want one longer santoku that handles meat and fish as well as vegetables, with a hammered face to help food release. Choose the MS-1881-H if you want an all-round santoku with a pointed-enough tip for proteins; choose the same series' MS-1881-B 7-inch nakiri if you mostly chop vegetables and want its taller 67 mm flat blade. Facts here come from Mitsumoto Sakari's listing; the knife was not tested.

What stands out

  • 7.7-inch (196 mm) MS-1881-H santoku blade
  • S440C powder steel core, HRC 60 ± 1
  • 73-layer Damascus with kurouchi hammer marks
  • 1.7 mm spine, 214 g, full tang
  • Riveted bloodwood and G10 MS-1881-H handle

Who it fits

Good fit for

Buy the Mitsumoto Sakari MS-1881-H if you want a long santoku that slices meat and fish as well as it chops vegetables, with a thin 1.7 mm spine, a hammered face for food release and a sturdy riveted full-tang handle.

Who should skip it

Skip the MS-1881-H if you want a dedicated vegetable cleaver (the MS-1881-B nakiri is taller and flatter), prefer a lighter knife than 214 g, or want a plain polished blade.

Verdict: A long, thin-spined kurouchi santoku with a powder-steel core and a riveted bloodwood G10 grip.

Mitsumoto Sakari MS-1881-H specs explained

MS-1881-H blade: 196 mm long, 50 mm tall

Longer than a typical 7-inch santoku; enough height for knuckle clearance.

MS-1881-H core: S440C powder steel, HRC 60 ± 1

A stainless core that should hold an edge well.

MS-1881-H cladding: 73-layer Damascus, kurouchi hammered

Raised and recessed marks to cut drag on potatoes and onions.

MS-1881-H spine and weight: 1.7 mm, about 214 g

Thin behind the edge; mid-weight for a santoku.

MS-1881-H handle: bloodwood and G10, full tang, riveted

Stable grip for pinch-holding during long prep.

Mitsumoto Sakari MS-1881-H build

The MS-1881-H wraps an S440C powder steel core, heat treated to HRC 60 ± 1, in 73 layers of folded Damascus. The upper blade has a black-forged "mountain ridge" hammered finish, so the face mixes kurouchi texture with visible layers. The blade is 196 mm long and 50 mm tall, with a 1.7 mm spine. The handle combines bloodwood and G10 on a full tang, secured with reinforced rivets, for a total of about 214 g. The listing does not give an edge angle.

Using the Mitsumoto Sakari 7.7-inch santoku

The extra length over a standard 7-inch santoku helps with wide cabbages, slabs of salmon and boneless chicken breasts, while the 50 mm height keeps knuckles clear when dicing. The hammered face helps sticky foods like potato and cucumber fall away. A 1.7 mm spine and HRC 60 core reward clean push-cuts; avoid bones, frozen food and twisting in hard squash. Hand wash and dry it to keep the kurouchi finish even.

Before buying the Mitsumoto Sakari MS-1881-H

"S440C powder steel" is Mitsumoto Sakari's own description; no maker of the powder steel is named. Edge angle is not listed. The length field of 13.1 inches is the overall package, not the knife.

Check before you buy

  • You want a 196 mm Mitsumoto Sakari santoku
  • The MS-1881-H's 214 g suits your grip
  • You like a kurouchi hammered face
  • You will hand wash the MS-1881-H

The product at a glance

Mitsumoto Sakari 7.7 Inch Santoku

Best for: All-round Damascus santoku

Blade Length
7.7 in
Knife Type
Santoku
Blade Material
S440C Powder Steel
Construction
73-Layer Damascus
Blade Hardness
60 HRC
Handle Material
Bloodwood G10

View on Amazon: Mitsumoto Sakari 7.7 Inch Santoku Affiliate link

Mitsumoto Sakari MS-1881-H: 7.7" (196 mm) santoku, 50 mm tall, S440C powder steel core at HRC 60 ± 1, 73-layer Damascus with kurouchi hammered finish, 1.7 mm spine, about 214 g, full-tang riveted bloodwood/G10 handle; edge angle not listed.

Pros

  • Long 196 mm MS-1881-H santoku blade
  • Thin 1.7 mm MS-1881-H spine
  • Hammered MS-1881-H face aids food release

Cons

  • MS-1881-H edge angle not listed
  • 214 g MS-1881-H is not a light santoku

Good fit if

  • You want one MS-1881-H for meat and vegetables
  • You like Mitsumoto Sakari's kurouchi look

Skip if

  • You only chop vegetables (see MS-1881-B)
  • You want a plain polished santoku

Verdict: A long, thin-spined kurouchi santoku with a powder-steel core.

Specifications side by side

Spec Mitsumoto Sakari 7.7 Inch Santoku
Blade Length 7.7 in
Knife Type Santoku
Blade Material S440C Powder Steel
Construction 73-Layer Damascus
Blade Hardness 60 HRC
Handle Material Bloodwood G10
Style Japanese
Recommended Use Vegetables, Meat
Dimensions 13.1 × 1.97 × 0.79 inches
Weight 7.55 ounces
Size 7.7"
Color Black/Brown/Silver
Model MS-1881-H

Frequently asked questions

How long is the Mitsumoto Sakari MS-1881-H blade?

196 mm (7.7 inches), 50 mm tall.

What steel is the MS-1881-H core?

S440C powder steel at HRC 60 ± 1, clad in 73 Damascus layers.

Is the MS-1881-H full tang?

Yes, with a riveted bloodwood and G10 handle.

Mitsumoto Sakari MS-1881-H santoku or MS-1881-B nakiri?

The MS-1881-H for mixed meat, fish and vegetable prep; the MS-1881-B for vegetable chopping with a taller 67 mm flat blade.

How heavy is the MS-1881-H santoku?

About 214 g, with a 1.7 mm spine.

See also