MIYABI 34088-183 7-Inch SG2 Rocking Santoku Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The MIYABI 34088-183 is a 7-inch rocking santoku in SG2 micro-carbide powder steel, with a thin Japanese blade profile and an edge hand-honed in MIYABI's three-step Honbazuke process to 9.5 to 12 degrees. SG2 is the selling point: a powder steel that MIYABI uses in its upper lines because it holds a very fine edge for a long time. The rocking profile curves enough to rock-mince herbs and garlic while keeping a santoku's height. The listing is short: three bullets, a 9.6-ounce weight and a black colour field, with no hardness, handle material or origin stated. Choose the 34088-183 if edge retention matters most and you sharpen on stones; choose the MIYABI Kaizen 34198-183 if you want a hollow-edge VG10 rocking santoku with fully listed specs. Based on MIYABI's 34088-183 listing, not on hands-on use.
What stands out
- SG2 micro-carbide powder steel in the 34088-183
- 34088-183 hand-honed to 9.5-12 degrees
- Rocking 7-inch profile on the 34088-183
- Thin MIYABI blade for clean push and rock cuts
Who it fits
Good fit for
Buy the 34088-183 if you want a premium SG2 santoku that you can rock, and you already sharpen on whetstones and treat thin blades gently.
Who should skip it
Skip the 34088-183 if you want a listing that names the handle, hardness and origin, need a hollow edge, or want a knife that tolerates bones and twisting.
Verdict: A premium SG2 rocking santoku with a short listing.
MIYABI 34088-183 specs explained
34088-183 SG2 powder steel
Fine, even carbides for long edge life; no hardness is listed here.
Honbazuke edge on the 34088-183
Hand-honed in three steps to 9.5 to 12 degrees.
7-inch rocking santoku shape
A curved belly that rocks like a chef's knife.
9.6 oz, black colour field
Handle material is not named in the listing.
What the 34088-183 listing confirms
Three bullets: SG2 micro-carbide powder steel, a thin Japanese blade profile and a Honbazuke edge of 9.5 to 12 degrees. The fields add 7 inches, black and 9.6 ounces; the dimension fields swap height and length. The listing does not state hardness, cladding, handle material, handle shape or where it is made, so confirm those with the seller if they matter to you.
Where the 34088-183 fits
Use it for slicing vegetables and boneless proteins, rock-mincing herbs, shallots and garlic, and thin slicing of fish. An SG2 edge this acute rewards a soft board and a light touch; keep it away from bones, frozen food, squash skins and twisting cuts, which chip hard steel.
Before you buy the MIYABI 34088-183
Hand wash and dry it, use a wood or soft plastic board, and sharpen on whetstones at a similar angle to keep the Honbazuke edge. Ask the seller which MIYABI line and handle it ships with, since the black colour field is all the listing gives.
Check before you buy
- You sharpen an SG2 34088-183 on whetstones
- You rock-chop with a 7-inch MIYABI santoku
- You can confirm the 34088-183 handle with the seller
- You keep the 34088-183 on a soft board
The product at a glance
MIYABI 7-Inch SG2 Rocking Santoku Knife
Best for: Fine slicing and mincing
- Blade Length
- 7-inch
- Knife Type
- Rocking Santoku
- Blade Material
- SG2 micro-carbide powder steel
- Edge Angle
- 9.5 to 12 degree
- Color
- Black
- Dimensions
- 3 × 1.31 × 14.8 inches
View on Amazon: MIYABI 7-Inch SG2 Rocking Santoku Knife Affiliate link
MIYABI 34088-183: 7-inch rocking santoku in SG2 micro-carbide powder steel, Honbazuke 9.5-12 degree edge, 9.6 oz, black; handle and origin not listed.
Pros
- SG2 powder steel 34088-183
- Very fine Honbazuke edge
- Rocking santoku shape
Cons
- Short listing: no handle or hardness
- Brittle on bone or twisting
Good fit if
- You want SG2 edge life
- You sharpen on stones
Skip if
- You need full specs
- You want a hollow edge
Verdict: A premium SG2 rocking santoku for careful sharpeners.
Specifications side by side
| Spec | MIYABI 7-Inch SG2 Rocking Santoku Knife |
|---|---|
| Blade Length | 7-inch |
| Knife Type | Rocking Santoku |
| Blade Material | SG2 micro-carbide powder steel |
| Edge Angle | 9.5 to 12 degree |
| Color | Black |
| Dimensions | 3 × 1.31 × 14.8 inches |
| Weight | 9.6 ounces |
| Size | 7" |
| Model | 34088-183 |
Frequently asked questions
What is SG2 steel?
A Japanese micro-carbide powder steel known for fine grain and long edge retention.
What edge angle does the MIYABI 34088-183 have?
9.5 to 12 degrees, hand-honed with the three-step Honbazuke process.
What handle does the 34088-183 have?
The listing does not say; it only gives a black colour field.
How heavy is the 34088-183?
9.6 ounces, per the listing.
How does it differ from the MIYABI Kaizen rocking santoku?
The Kaizen 34198-183 uses VG10 at Rockwell 60 with a hollow edge and a Micarta handle; this 34088-183 uses SG2 powder steel and lists no hollow edge.
Featured in
See also
- miyabi mizu sg2 7 santoku review
- miyabi 400fc review
- miyabi evolution 5 5 inch santoku review
- miyabi birchwood sg2 japanese chef s review
- miyabi koh 8 inch chef s knife review
- MIYABI Koya 8-Inch Chef's Knife Review: Specs, Pros and Cons
- MIYABI Birchwood SG2 7-Inch Santoku Knife Review: Who It Fits and Who Should Skip It
- MIYABI Artisan 7-Inch SG2 Santoku Knife Review (2026): A Spec-Based Look
- korser rocking recliner review
- vavasoo self rocking bassinet review
