As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

MIYABI Birchwood SG2 6-Inch Chef's Knife (34373-163) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The MIYABI Birchwood 34373-163 is the 6-inch chef's knife of the Birchwood SG2 line, which MIYABI pitches at smaller hands and a lighter feel. It has an SG2 micro-carbide powder-steel blade with a 100-layer flower Damascus pattern, a thin Japanese profile, a Honbazuke hand-honed edge at 9.5 to 12 degrees and a Karelian birch handle, handcrafted in Seki, Japan. Choose the 6-inch 34373-163 if your hands are small, your board is small, or you mostly cut vegetables, fruit and boneless meat in small batches; choose the 8-inch Birchwood 34373-203 if you cut large squash, whole chickens or big piles of onions. Our notes come from MIYABI's 34373-163 listing and published specs; the knife was not tested by us.

What stands out

  • SG2 powder steel in the 6-inch 34373-163
  • 34373-163 edge honed to 9.5-12 degrees
  • Short blade sized for smaller hands
  • Karelian birch 34373-163 handle
  • 34373-163 handcrafted in Seki

Who it fits

Good fit for

Buy the MIYABI 34373-163 if you want a short, very sharp SG2 chef's knife that is easier to control in small hands or a small kitchen.

Who should skip it

Skip the MIYABI 34373-163 if you need an 8-inch reach, want a dishwasher-safe or low-care knife, or would rather spend less on a first chef's knife.

Verdict: A compact SG2 gyuto from MIYABI's Birchwood line, built for control.

MIYABI Birchwood 34373-163 specs explained

34373-163 blade length 6 inches

Shorter than a standard 8-inch chef's knife; easier to steer.

SG2 powder steel in the 34373-163

Fine-grained steel that holds a very thin edge for a long time.

Honbazuke edge, 9.5-12 degrees per side

Much more acute than most German knives; cuts cleanly but needs care.

Karelian birch on the 34373-163

Figured wood handle; keep it dry.

34373-163 100-layer flower Damascus

The layered cladding is mostly about looks and stain resistance.

MIYABI Birchwood 34373-163 build

The blade is thin, with an SG2 micro-carbide powder-steel core under a 100-layer flower Damascus pattern, and is hand-honed in three Honbazuke steps. The handle is Karelian birch, a figured wood MIYABI uses across the Birchwood line. The listing has only three bullets and names no hardness; its 9.6 oz weight and 15.1-inch height figures look like box data, so the knife's own weight is not stated here.

Using the 6-inch Birchwood chef's knife

The 34373-163 suits mincing shallots and herbs, slicing peppers, cutting fruit and trimming boneless chicken. Its short blade fits small boards and narrow counters. It is too short for slicing a large watermelon or a cabbage in one pass. The acute SG2 edge can chip on bones, frozen food or glass boards, so use wood or soft plastic and hand wash it.

MIYABI 34373-163 caveats

Three-bullet listing: no hardness, tang or care notes. Weight and height fields look like package data. The thin edge needs whetstone sharpening rather than pull-through sharpeners. The 6-inch size is a niche choice; many cooks want the 8-inch as their main knife.

Check before you buy

  • Measure your board: the 34373-163 suits small spaces
  • Plan whetstone sharpening for the SG2 34373-163 edge
  • Hand wash and dry the birch 34373-163 handle
  • Keep a sturdier knife for bones and squash

The product at a glance

Miyabi Birchwood SG2 6-Inch Chef's Knife

Best for: Smaller hands

Blade Length
6-inch
Knife Type
Chef's Knife
Blade Material
G2 micro-carbide powder steel
Construction
100-layer flower Damascus
Edge Angle
9.5 to 12 degree
Handle Material
Karelian Birch

View on Amazon: Miyabi Birchwood SG2 6-Inch Chef's Knife Affiliate link

MIYABI Birchwood 34373-163: 6" chef's knife, SG2 powder steel, 100-layer flower Damascus, Honbazuke edge at 9.5-12 degrees, Karelian birch handle, made in Seki. Own weight not listed.

Pros

  • SG2 34373-163 edge stays sharp
  • Short blade easy to control
  • Seki-made MIYABI build

Cons

  • Three-bullet 34373-163 listing
  • Thin SG2 edge can chip

Good fit if

  • You have small hands and want MIYABI quality
  • You cut small batches of produce

Skip if

  • You need an 8-inch MIYABI for big jobs
  • You want a 34373-163 that goes in the dishwasher

Verdict: A short, very sharp SG2 chef's knife for small hands and small boards.

Specifications side by side

Spec Miyabi Birchwood SG2 6-Inch Chef's Knife
Blade Length 6-inch
Knife Type Chef's Knife
Blade Material G2 micro-carbide powder steel
Construction 100-layer flower Damascus
Edge Angle 9.5 to 12 degree
Handle Material Karelian Birch
Color Silver
Style Japanese
Dimensions 3.25 × 1.38 × 15.1 inches
Weight 9.6 ounces
Size 6"
Model 34373-163

Frequently asked questions

What steel is the MIYABI Birchwood 34373-163?

SG2 micro-carbide powder steel with a 100-layer flower Damascus pattern.

What edge angle does the MIYABI 34373-163 have?

MIYABI lists a Honbazuke edge at 9.5 to 12 degrees.

Is the 6-inch MIYABI Birchwood good for small hands?

MIYABI designed the 34373-163 for smaller hands and a lighter feel.

MIYABI Birchwood 6-inch or 8-inch chef's knife?

The 6-inch 34373-163 for control and small boards; the 8-inch 34373-203 for larger produce and more volume.

Where is the MIYABI Birchwood 34373-163 made?

It is handcrafted in Seki, Japan, per the listing title.

See also