As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

MIYABI Black 5000MCD67 7-Inch Rocking Santoku Review (34408-183)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The MIYABI Black 5000MCD67 34408-183 is a 7-inch rocking santoku for cooks who mince herbs and garlic with a rocking motion but want MIYABI's hardest steel. The core is MC66 micro-carbide steel hardened to 66 HRC, wrapped in 133 layers that form a floral Damascus pattern. The edge is sharpened with the three-step Honbazuke method, the D-shaped handle is black ash, and the knife is hand crafted in Seki, Japan. Choose the 34408-183 if you rock-chop; choose its straight-edged sibling, the Black 5000MCD67 34404-183 santoku, if you mostly push-cut and want the lighter listed weight. This review draws on MIYABI's listing and published specs, not hands-on testing.

What stands out

  • Rocking 7-inch profile on the 34408-183
  • MC66 core hardened to 66 HRC
  • 133-layer floral Damascus on the rocking blade
  • Black ash D-shaped handle

Who it fits

Good fit for

Buy the 34408-183 if you rock through herbs, shallots and garlic, want a 66 HRC edge that rarely needs sharpening, and treat a premium knife with care.

Who should skip it

Skip it if you push-cut more than you rock, need a forgiving blade for bones or squash, or want a listing that gives the edge angle and a believable weight.

Verdict: A premium MC66 santoku built for rocking cuts.

MIYABI Black 34408-183 specs explained

Rocking santoku shape

More belly than a flat santoku, so the blade rolls tip-to-heel for mincing.

MC66 at 66 HRC

Extremely hard steel: long edge life, little tolerance for side loads.

133 layers, floral pattern

The layered jacket gives the Black line its busy flower-like Damascus.

Black ash D handle, made in Seki

A dark wood handle; the D shape fits a right-hand grip best.

What the 34408-183 listing says and skips

Five bullets cover the 133 layers, MC66 at 66 HRC, the black ash D handle, three-step Honbazuke sharpening and hand crafting in Seki. The listing gives no edge angle, no bolster or end cap detail and no care line. Its 12.8-ounce weight and 16.8-inch length look like box figures; the straight 34404-183 lists 7.04 ounces, and the rocking model should be close to that. MIYABI's straight Black santoku names Blackleaf maple for its handle, so ask the seller which wood the 34408-183 ships with if it matters.

How a rocking santoku cuts

The curved edge keeps contact with the board as you roll the blade, which suits fine mincing of parsley, garlic and shallots, while the tall blade still scoops food off the board. A 66 HRC MC66 edge stays keen through a lot of that work. Lifting the blade fully, as for straight chopping, wastes the curve; if that is how you cut, the flat santoku suits you better.

Before you buy the MIYABI Black rocking santoku

Hand wash and dry it, use a wood board, and touch it up on fine whetstones; MC66 chips if levered against bone or frozen food. Confirm the handle wood and weight with the seller since the listing figures disagree with MIYABI's other Black listings.

Check before you buy

  • You rock-mince herbs and garlic often
  • You hone MC66 on fine stones
  • You cut on a wood board
  • You can check the handle wood with the seller

The product at a glance

Miyabi Black 5000MCD67 7-Inch Rocking Santoku

Best for: Rock-mincing herbs and aromatics

Blade Length
7"
Knife Type
Rocking Santoku
Blade Material
MC66 MicroCarbide steel
Construction
133 layers of steel, floral damascus
Blade Hardness
66 HRC
Handle Material
Black ash

View on Amazon: Miyabi Black 5000MCD67 7-Inch Rocking Santoku Affiliate link

MIYABI Black 5000MCD67 34408-183: 7-inch rocking santoku, MC66 at 66 HRC, 133-layer floral Damascus, three-step Honbazuke edge, black ash D handle, hand crafted in Seki.

Pros

  • Curved belly for rock-mincing
  • 66 HRC edge lasts
  • Striking 133-layer finish

Cons

  • Weight field looks like box weight
  • Brittle against bone

Good fit if

  • You rock-chop
  • You want MC66 steel

Skip if

  • You push-cut mostly
  • You want a forgiving knife

Verdict: A hard, striking santoku made for rocking cuts.

Specifications side by side

Spec Miyabi Black 5000MCD67 7-Inch Rocking Santoku
Blade Length 7"
Knife Type Rocking Santoku
Blade Material MC66 MicroCarbide steel
Construction 133 layers of steel, floral damascus
Blade Hardness 66 HRC
Handle Material Black ash
Color Black
Dimensions 16.8 × 3 × 1 inches
Weight 12.8 ounces
Size 7"
Model 34408-183

Frequently asked questions

What steel is the MIYABI Black 34408-183?

MC66 micro-carbide steel hardened to 66 HRC, inside 133 layers of Damascus.

Rocking or straight MIYABI Black santoku?

Pick the rocking 34408-183 if you mince with a rocking motion; pick the flat 34404-183 for push-cuts and chopping.

How heavy is the 34408-183?

The listing says 12.8 ounces, which looks like a packaged weight; the straight Black santoku lists 7.04 ounces.

What is the handle of the rocking Black santoku?

Black ash in a D shape, per this listing.

Where is the MIYABI Black 5000MCD67 made?

It is hand crafted in Seki, Japan.

See also