Shun Premier 6-Inch Gokujo Boning and Fillet Knife Review (TDM0774)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Shun Premier TDM0774 is a 6-inch Gokujo, a Japanese boning and fillet knife with a narrow, curved blade that gets close to the bone and cuts through fibrous tissue such as silverskin and sinew. It uses a VG-MAX core with 68 layers of Damascus cladding, a 16-degree edge, the Premier series' hammered tsuchime finish to reduce drag and sticking, and a contoured Pakkawood handle, all handcrafted in Japan. Where a Western boning knife is often a thin stamped blade built for hard use, the TDM0774 is a precision tool for fish and clean trimming. Choose it if you fillet fish, trim tenderloins and want premium steel with a striking finish; choose a stamped Western boner if you hack through joints and cartilage, where a hard edge can chip. This review uses the listing and Shun's published details, not hands-on testing.
What stands out
- Narrow, curved TDM0774 Gokujo blade
- TDM0774 VG-MAX core, 68-layer cladding
- Tsuchime dimples on the TDM0774 cut drag
- Shun sharpens the TDM0774 free
Who it fits
Good fit for
Buy the TDM0774 if you fillet fish, trim silverskin and portion boneless meat and want a very sharp, premium Japanese blade.
Who should skip it
Skip the TDM0774 if you cut through poultry joints, cartilage or frozen fish, or want a budget boning knife you can treat roughly.
Verdict: A premium Japanese boning and fillet knife for precise trimming.
Premier TDM0774 specs explained
6-inch Gokujo blade
Narrow and curved to follow bones and lift fillets.
TDM0774 steel: VG-MAX plus 68 layers
A hard core for edge holding inside patterned cladding.
Tsuchime hammered finish
Small dimples reduce drag and help flesh release.
TDM0774 weight 4.5 oz, 11.3 in overall
Light for fine, controlled cuts.
How the TDM0774 is built
The listing describes a narrow, curved, very sharp blade, the Premier series' hammered tsuchime finish, a VG-MAX core with 68 layers of Damascus cladding and a 16-degree edge. The contoured Pakkawood handle is described as secure for both left- and right-handed cooks. The knife is handcrafted in Japan, and Shun backs it with free sharpening and honing. Flexibility is not stated.
Fish and trimming work for the TDM0774
Fillet a striped bass, skin a side of salmon, remove pin-bone strips, trim silverskin from a pork tenderloin, or clean fat from a duck breast. Let the curve ride the bones and keep the edge away from hard contact. For splitting a chicken backbone or cutting through joints, use poultry shears or a heavier Western boner.
Before you buy the Shun TDM0774
Treat the hard 16-degree edge gently: no twisting in joints, no bones, no glass or stone boards, and hand wash only. A Gokujo is more about precision than bulk work, so decide if your boning is mostly fish and trimming. Shun offers free sharpening, which helps keep the edge right.
Check before you buy
- You fillet fish or trim meat with the TDM0774 more than you chop joints
- You will hand wash and dry the TDM0774 at once
- You want a hammered Premier finish
- You keep shears or a sturdier knife for poultry joints
The product at a glance
Shun Premier 6-Inch Boning and Fillet Knife
Best for: Filleting fish
- Blade Length
- 6 in
- Knife Type
- Boning & Fillet Knife
- Blade Material
- VG-MAX, Damascus stainless steel
- Construction
- 68 layers Damascus cladding
- Edge Angle
- 16°
- Handle Material
- Pakkawood
View on Amazon: Shun Premier 6-Inch Boning and Fillet Knife Affiliate link
Shun Premier TDM0774: 6-inch Gokujo boning and fillet knife, narrow curved VG-MAX blade with 68-layer Damascus, tsuchime finish, 16-degree edge.
Pros
- Narrow curved TDM0774 blade hugs bones
- Hammered TDM0774 face lets fish release
- Light at 4.5 oz
Cons
- Hard TDM0774 edge can chip on joints
- Flex not stated in the listing
Good fit if
- You fillet fish often
- You trim tenderloins and silverskin
Skip if
- You cut through poultry joints
- You want a rough-use TDM0774 substitute
Verdict: A precise, premium Japanese boning and fillet knife.
Specifications side by side
| Spec | Shun Premier 6-Inch Boning and Fillet Knife |
|---|---|
| Blade Length | 6 in |
| Knife Type | Boning & Fillet Knife |
| Blade Material | VG-MAX, Damascus stainless steel |
| Construction | 68 layers Damascus cladding |
| Edge Angle | 16° |
| Handle Material | Pakkawood |
| Color | Brown |
| Style | Japanese |
| Recommended Use | Boning |
| Dimensions | 11.3 × 0.63 × 1.25 inches |
| Weight | 4.5 ounces |
| Size | 6" |
| Model | TDM0774 |
Frequently asked questions
What is a Gokujo knife?
A Japanese boning and fillet knife with a narrow, curved blade, like the 6-inch Shun TDM0774.
What steel is the Shun Premier TDM0774?
VG-MAX with 68 layers of Damascus cladding and a 16-degree edge, per the listing.
What does the tsuchime finish do on the TDM0774?
The hammered dimples reduce drag and help food release from the blade.
Can the Shun Premier boning knife cut through chicken bones?
It is built to cut close to bones, not through them; the hard edge can chip.
Is the TDM0774 flexible?
The listing does not rate its flexibility; it calls the blade narrow and curved.
Featured in
See also
- shun classic 2 5 inch bird s beak knife review
- shun kanso 7 inch asian utility knife review
- shun sora 7 inch hollow ground santoku review
- shun premier 8 chef s knife review
- shun classic 10 chef s knife review
- Shun Premier 7-Inch Hammered Santoku Review: Who It Fits and Who Should Skip It
- Shun Sora 8-Inch Chef's Knife Review (2026): A Spec-Based Look
- Shun Classic 7-Inch Santoku Knife Review: Specs, Pros and Cons
- adata premier 16gb review
- premier water systems premier review
