TJ POP SEGA TC17068 7.2-Inch Chinese Cleaver Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The TJ POP SEGA TC17068 is a light 7.2-inch Chinese cleaver: a thin 30Cr13 stainless blade about 2 mm thick, a full tang, a full bolster and a black ABS handle with three rivets. TJ POP lists the weight at 8.2 ounces (8.11 in the spec field), which is light for a cleaver. The listing title leaves out the brand and calls it a meat cleaver, but the thin blade and TJ POP's own text point to slicing meat, fish, fruit and vegetables rather than chopping bone. It costs under $10. Choose the TC17068 if you want a cheap, low-care stainless cleaver that can go in a busy kitchen; choose Helen's Asian Kitchen 97154 if you want an 8-inch carbon steel blade with a walnut handle and can dry it after every use. This review relies on TJ POP's listing and published specs, not on testing.
What stands out
- 7.2-inch Chinese cleaver, model TC17068
- 30Cr13 stainless blade, about 2 mm thick
- Full tang with full bolster
- Black ABS grip held by three rivets
- About 8 oz, under $10
Who it fits
Good fit for
Buy it if you want a light, cheap stainless cleaver for slicing meat and vegetables.
Who should skip it
Skip it if you need to chop through bones or want steel that holds an edge for months.
Verdict: A light budget slicing cleaver in easy-care stainless.
TJ POP TC17068 specs explained
30Cr13 stainless on the TC17068
A soft, rust-resistant budget steel: easy to resharpen, dulls sooner than harder grades.
2 to 2.1 mm blade
Thin for a cleaver; good for slicing, too thin for bones.
Full tang and full bolster
The steel runs through the handle and the bolster guards the fingers.
ABS handle, three rivets
A plastic grip that shrugs off water better than wood.
8.2 oz in the bullets
Light enough for long prep; the spec field says 8.11 oz.
TJ POP SEGA cleaver design
The TC17068 is heat forged, hand sharpened and fitted with a smooth hand-polished ABS handle held by three rivets. The listing gives a 3.46-inch blade height and 11.5 inches overall. TJ POP describes the blade as both high-carbon steel and 30Cr13 stainless; 30Cr13 is a low-carbon stainless grade, so expect stainless behaviour.
Kitchen use for the TC17068
Slice pork belly, beef for hot pot, cabbage and melons; the wide blade also lifts chopped food to the pan. Leave bones, frozen meat and hard squash rinds to a heavier knife. Expect to hone or touch up the soft steel often. Hand washing keeps the edge longer, although the ABS handle copes with water.
Before you buy the TJ POP SEGA TC17068
Treat it as a light slicer, not a butcher's chopper, whatever the title says. The brand name is missing from the listing title; the brand field and model code TJ-JP-QPD-TC17068 identify it. No sheath is included.
Check before you buy
- A sub-$10 Chinese cleaver fits your budget
- Slicing outweighs chopping in your cooking
- Frequent honing of soft 30Cr13 is fine
- An ABS handle suits a wet kitchen
The product at a glance
TJ POP 7.2-Inch Full Tang Cleaver
Best for: Budget slicing cleaver
- Blade Length
- 7.2"
- Intended Use
- Slicing meat, fruits, vegetables, fish
- Blade Steel
- 30Cr13 stainless steel
- Handle Material
- ABS
- Construction
- Forged, full tang
- Blade Thickness
- 2.1 mm
View on Amazon: TJ POP 7.2-Inch Full Tang Cleaver Affiliate link
TJ POP SEGA TC17068 7.2-inch Chinese cleaver: 30Cr13 stainless, about 2 mm thick, full tang and bolster, triple-riveted ABS handle, about 8 oz. A light slicer under $10; brand missing from the listing title.
Pros
- Very low price
- Light at about 8 oz
- Full tang, riveted ABS handle
Cons
- Soft 30Cr13 dulls sooner
- Too thin for bones
Good fit if
- You want a cheap slicing cleaver
- You cook in a wet, busy kitchen
Skip if
- You chop bones
- You want long edge life
Verdict: A cheap, light stainless cleaver for slicing.
Specifications side by side
| Spec | TJ POP 7.2-Inch Full Tang Cleaver |
|---|---|
| Blade Length | 7.2" |
| Intended Use | Slicing meat, fruits, vegetables, fish |
| Blade Steel | 30Cr13 stainless steel |
| Handle Material | ABS |
| Construction | Forged, full tang |
| Blade Thickness | 2.1 mm |
| Style | Chinese |
| Recommended Use | Meat |
| Dimensions | 11.5 × 3.46 × 0.79 inches |
| Weight | 8.11 ounces |
| Size | 7.2" |
| Color | TC17068 |
| Model | TJ-JP-QPD-TC17068 |
Frequently asked questions
What steel is the TJ POP TC17068 cleaver?
30Cr13 stainless steel, about 2 mm thick.
Can the TJ POP SEGA cleaver cut bones?
The thin 2 mm blade is meant for slicing; use a heavy cleaver for bones.
How heavy is the TC17068?
About 8.2 ounces per the bullets, 8.11 ounces in the spec field.
Is the TJ POP cleaver full tang?
Yes, full tang with a full bolster and three rivets.
What size is the TJ POP SEGA cleaver?
A 7.2-inch blade, 3.46 inches tall, 11.5 inches overall.
Featured in
See also
- hexclad 5 inch damascus utility knife review
- asety 3 piece damascus knife set review
- babish birds beak paring knife review
- best kitchen knives under 30
- best kitchen knives under 50
- Best Kitchen Knives Under $100 in 2026: 13 Picks Ranked by Specs
- Best Kitchen Knives Under $150: 12 Spec-Based Picks
- 9 Best Kitchen Knives Under $200, Compared
- minilabo stylus 2 kobo 7 review
- vturboway 2 PCs 12 meat review
