MIYABI Kaizen 34198-183 7-Inch Hollow Edge Rocking Santoku Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The MIYABI Kaizen 34198-183 is a 7-inch rocking santoku with a hollow edge, made in Seki, Japan. Unlike a flat santoku, its edge has enough curve to rock through herbs and garlic the way a Western chef's knife does, while keeping the thin Japanese profile. The core is VG10 steel, CRYODUR ice-hardened to Rockwell 60, inside a 65-layer flower Damascus pattern, and MIYABI hand-hones it with its three-step Honbazuke process to a 9.5- to 12-degree edge. The handle is a traditional D-shaped black linen Micarta. Choose the Kaizen 34198-183 if you rock-chop and want a hard, thin santoku with hollow-edge scallops; choose MIYABI's SG2 rocking santoku (34088-183) if you want the same 7-inch rocking shape in harder SG2 powder steel. Based on MIYABI's 34198-183 listing, not on hands-on use.
What stands out
- Rocking 7-inch 34198-183 profile for chop-and-rock cutting
- VG10 core in the Kaizen 34198-183, 60 HRC
- Kaizen 34198-183 hand-honed to 9.5-12 degrees
- Hollow-edge scallops on the Kaizen santoku
Who it fits
Good fit for
Buy the Kaizen 34198-183 if you like a santoku's height and thin blade but rock your knife when chopping herbs, onions and garlic.
Who should skip it
Skip the Kaizen 34198-183 if you want a heavy, forgiving German blade, a dishwasher-safe knife, or a flat santoku edge for push cutting only.
Verdict: A thin VG10 rocking santoku for cooks who rock-chop.
MIYABI Kaizen 34198-183 specs explained
7-inch rocking santoku with hollow edge
A curved belly for rocking, plus scallops that help release slices.
VG10, CRYODUR to Rockwell 60
Hard stainless core that holds a fine edge; harder steel chips if abused.
Honbazuke edge, 9.5 to 12 degrees
A very acute edge, much finer than a typical Western knife.
65-layer flower Damascus, Micarta
Patterned cladding with a katana-style edge line and a D-shaped linen Micarta handle.
How the Kaizen 34198-183 is built
MIYABI clads a VG10 core in 65 layers with a flower Damascus pattern and a katana edge line, ice-hardens it with its CRYODUR process to Rockwell 60, and hand-hones it in three Honbazuke steps to 9.5 to 12 degrees. The handle is a traditional Japanese D-shaped handle in black linen Micarta. The listing gives 9.6 ounces and 14.8 inches overall, and the knife is handcrafted in Seki, Japan.
Where a rocking santoku fits
The 34198-183 suits cooks who move between push cuts and rocking: slicing onions and peppers, rock-mincing parsley, chives and garlic, and slicing boneless chicken and fish. The thin, hard edge cuts cleanly but should not meet bones, frozen food or twisting; a Western chef's knife or cleaver handles those.
Before you buy the MIYABI Kaizen 34198-183
Hand wash and dry it; a 9.5- to 12-degree VG10 edge is best kept on whetstones or a ceramic rod rather than a coarse pull-through. Use a wood or soft plastic board. The D-shaped Micarta handle suits right- and left-handed pinch grips.
Check before you buy
- You rock-chop herbs with a 7-inch Kaizen
- You will sharpen a 9.5-12 degree Kaizen edge on stones
- You keep the 34198-183 off bones and frozen food
- A D-shaped Micarta handle feels right to you
The product at a glance
MIYABI Kaizen 7-inch Hollow Edge Rocking Santoku
Best for: Rock-chopping prep
- Blade Length
- 7 in
- Knife Type
- Rocking Santoku
- Blade Material
- VG10 super steel
- Construction
- 65-layer flower Damascus
- Edge Type
- Hollow edge
- Edge Angle
- 9.5 to 12 degree
View on Amazon: MIYABI Kaizen 7-inch Hollow Edge Rocking Santoku Affiliate link
MIYABI Kaizen 34198-183: 7-inch hollow edge rocking santoku, VG10 at Rockwell 60, 65-layer flower Damascus, 9.5-12 degree Honbazuke edge, black linen Micarta handle, Seki.
Pros
- Rocking Kaizen 34198-183 profile
- Hard VG10 core at 60 HRC
- Very fine Honbazuke edge
Cons
- Thin edge chips on bone
- Hand wash and stone sharpening
Good fit if
- You rock-chop herbs
- You like thin Japanese blades
Skip if
- You want a forgiving German knife
- You push-cut only
Verdict: A thin, hard VG10 santoku for cooks who rock their knife.
Specifications side by side
| Spec | MIYABI Kaizen 7-inch Hollow Edge Rocking Santoku |
|---|---|
| Blade Length | 7 in |
| Knife Type | Rocking Santoku |
| Blade Material | VG10 super steel |
| Construction | 65-layer flower Damascus |
| Edge Type | Hollow edge |
| Edge Angle | 9.5 to 12 degree |
| Blade Hardness | Rockwell 60 |
| Handle Material | black linen Micarta |
| Dimensions | 14.8 × 3 × 1 inches |
| Weight | 9.6 ounces |
| Size | 7" |
| Color | Multicolor |
| Model | 34198-183 |
Frequently asked questions
What makes the Kaizen 34198-183 a rocking santoku?
A santoku with a curved belly so it can rock like a chef's knife, unlike the flatter standard santoku.
What steel is the Kaizen 34198-183?
VG10, CRYODUR ice-hardened to Rockwell 60, with 65-layer flower Damascus cladding.
What edge angle does the 34198-183 have?
MIYABI hand-hones it with the Honbazuke process to 9.5 to 12 degrees.
Is the Damascus pattern on the Kaizen real layering?
MIYABI lists 65 layers around the VG10 core.
How does the Kaizen rocking santoku differ from the SG2 version?
The SG2 version (34088-183) uses SG2 micro-carbide powder steel in the same 7-inch rocking shape; this Kaizen uses VG10 and has a hollow edge.
Featured in
See also
- miyabi 34088 183 sg2 rocking santoku review
- miyabi mizu sg2 7 santoku review
- miyabi 400fc review
- miyabi birchwood sg2 japanese chef s review
- miyabi koh 8 inch chef s knife review
- MIYABI Koya 8-Inch Chef's Knife Review: Specs, Pros and Cons
- MIYABI Birchwood SG2 7-Inch Santoku Knife Review: Who It Fits and Who Should Skip It
- MIYABI Artisan 7-Inch SG2 Santoku Knife Review (2026): A Spec-Based Look
- bovugac iflytek 7 inch review
- z z edge z edge 27 inch curved review
